http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
외부 수압을 받는 필라멘트 와인딩 후판 복합재 원통의 좌굴 연구
문철진(Chul-jin Moon),허성화(Seong-Hwa Hur),안정희(Jung-Hee Ahn),권진회(Jin-Hwe Kweon),최진호(Jin-Ho Choi),조종래(Jong-Rae Cho),조상래(Sang-Rae Cho) 한국항공우주학회 2009 韓國航空宇宙學會誌 Vol.37 No.2
외부 수압을 받는 필라멘트 와인딩 후판 복합재 원통의 좌굴 및 파손을 유한요소법과 시험으로 연구하였다. 자체 개발 프로그램인 ACOS와 상업용 프로그램인 M5C.NASTRAN(선형)과 MSC.MARC(비선형)를 이용한 유한요소해석을 수행하였다. 복합재 원통 시편은 T700 카본-에폭시로 필라멘르 와인딩 기법에 의해 [±30/90]<SUB>FW</SUB>, [±45/90]<SUB>FW</SUB>, [±60]<SUB>FW</SUB>, [±60/90]<SUB>FW</SUB>의 각도로 제작하여 수압시험을 수행하였다. 사용한 세 가지 프로그램 중 ACOS가 시험값과 1.7~14.3%의 차이를 보이며 좌굴 압력을 가장 잘 예측하였다. 모든 경우에 좌굴 후 지지하중이 초기 좌굴하중보다 커지지 못하고 최종파손으로 연결되었다. The buckling and failure of filament wound thick composite cylinders under external hydrostatic pressure were investigated by the finite element analysis and test. ACOS, MSC.NASTRAN, and MSC.MARC were used for finite element analysis. T700 carbon-epoxy filament wound composite cylinders were fabricated to have winding angles of [±30/90]<SUB>FW</SUB>, [±45/90]<SUB>FW</SUB>, [±60]<SUB>FW</SUB>, and [±60/90]<SUB>FW</SUB>, and tested to verify the finite element analysis. Among the softwares, ACOS predicted buckling load the best with about 1.7~14.3% deviation from test. Analysis and test shows cylinders do not recover the initial buckling pressure after buckling and directly lead to final failure.
염수환경에 의한 UPN139 탄소/에폭시 복합재 물성치 변화 연구
김중진(Joong-Jin Kim),문철진(Cheol-Jin Moon),허성화(Seong-Hwa Hur),이청락(Cheng-Rak Lee),권진회(Jin-Hwe Kweon),최진호(Jin-Ho Choi) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.10
Experiments were performed to investigate the effect of salt water on the mechanical properties of UPN-139 carbon-epoxy composite after 0, 1, 3, 6, 9 and 12 months immersion in 3.5% salt water. Waterproof painting and sealing tape were applied to protect the water absorption on the both cutting sides and taps of specimens. Test results show that while the tensile properties in fiber and matrix direction did not decrease considerably until 12 months of immersion, shear strength and modulus decreased gradually from nine months of the immersion. The reduction of shear strength and modulus were 9.5% and 10.8% of the values of dry specimens without exposure to salt water, respectively .