http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가상사설망의 성능개선을 위한 동적 키 재생성 주기 변경 알고리즘
한종훈,이정우,박성한,HAN, Jong-Hoon,LEE, Jung Woo,PARK, Sung Han 대한전자공학회 2005 電子工學會論文誌-TC (Telecommunications) Vol.42 No.10
IPSec은 인터넷의 네트워크 계층의 IP 메시지를 위한 기밀성과 인증서비스를 제공하는 보안 프로토콜이다. Internet Key Exchange (IKE)는 안전하게 Security Association (SA)를 협상하고 키 재료를 제공하는 프로토콜이다. 본 논문에서는 IPSec을 적용한 가상사설망의 성능 개선을 위해 동적으로 키 재생성 주기를 변경하는 알고리즘을 제안한다. 제안하는 알고리즘은 보안 터널 수에 따라 키 재생성 주기를 변경한다. 성능 평가를 위해 Linux 2.4.18과 FreeS/WAN을 사용하여 구현한다. 구현한 시스템은 기존 프로토콜에 비하여 네트워크 처리율과 보안성 측면에서 성능이 개선됨을 보여주고 있다. Ipsec is a security protocol suite that provides encryption and authentication services for IP messages at the network layer of the internet. Internet Key Exchange (IKE) is a protocol that is used to negotiate and provide authenticated keying materials in a protected manner for Security Associations (SAs). In this paper, we propose a dynamic key lifetime change algorithm for performance enhancement of virtual private networks using IPSec. The proposed algorithm changes the key lifetime according to the number of secure tunnels. The proposed algorithm is implemented with Linux 2.4.18 and FreeS/WAN 1.99. The system employing our proposed algorithm performs better than the original version in terms of network performance and security.
Pulsed UV를 이용한 CSOs 소독시 반사체에 따른 처리효율 연구
한종훈,허지용,김강욱,이준영,박원석,이종열,허남국,Han, Jonghun,Hur, Jiyong,Kim, Kangwook,Lee, Junyoung,Park, Wonseok,Lee, Jongyeol,Her, Namguk 한국지하수토양환경학회 2015 지하수토양환경 Vol.20 No.1
This study examined the disinfection in combined sewer overflows (CSOs) by pulsed ultraviolet (PUV). The reflectors (stainless steel. mirror, aluminium foil, aluminium (1050), aluminium (6061), aluminium (5052), and aluminium mirror) of PUV irradiation was performed in a 90 L stainless reactor at a constant temperature of $20^{\circ}C$ and an applied power of 4000 W. The reflection efficiency of reflectors were showed 1.00 (aluminium mirror) ~ 1.48 (aluminium foil) does. The case of a rough surface analysis using SEM showed high reflectance, was the case of a smooth surface and a low reflectivity. Pseudo first-order rate constant calculated results, has a higher reflectivity values were more than twice as high compared to the low reflectivity. Affected Total coliforms disinfection time, depending on the type of reflector is considered.
효율적인 2-Methylisoborneol, Geosmin의 제거를 위한 Pulsed UV 공정과 Ultrasound 공정의 비교 연구
한종훈,허지용,김강욱,이준영,박원석,이종열,허남국,Han, Jonghun,Hur, Jiyong,Kim, Kangwook,Lee, Junyoung,Park, Wonseok,Lee, Jongyeol,Her, Namguk 한국지하수토양환경학회 2015 지하수토양환경 Vol.20 No.4
The degradation of off-flavors which is 2-Methylisoborneol (2-MIB) and geosmin by means of ultrasound (US) and pulsed ultraviolet (PUV) irradiation and its combination with catalyst (wire mesh, wire mesh coated TiO<sub>2</sub>, and TiO<sub>2</sub>) and additive (H<sub>2</sub>O<sub>2</sub>) were investigated via water system. A combination treatment of TiO<sub>2</sub> and H<sub>2</sub>O<sub>2</sub> heterogeneity with US (24 kHz) and PUV (6000 W) has shown improved results in destroying 2-MIB and geosmin, which may be attributed to chain reactions by the enhanced formation of hydroxyl radicals (·OH) through H<sub>2</sub>O<sub>2</sub> dissociation and reactive oxide ions of TiO<sub>2</sub> addition. Rapid degradation of off-flavors occurred within 2 min under PUV process with H<sub>2</sub>O<sub>2</sub> 100 mg/L (81.5% for 2- MIB; 79.3% for geosmin) and TiO<sub>2</sub> 100 mg/L (83.7% for 2-MIB; 79.8% for geosmin), while compared with H2O2 100 mg/L (58.4% for 2-MIB; 58.0% for geosmin) and TiO<sub>2</sub> 100 mg/L (59.2% for 2-MIB; 38.5% for geosmin) within 5 min under US process. Surprisingly, the emphasis was given on the comparison with the same injected energies between PUV and US on degradation efficiency. Based on the injected energy comparison, the US provided better degradation performance under equal input power of 200 kJ with H<sub>2</sub>O<sub>2</sub> 100 mg/L, while compared with H<sub>2</sub>O<sub>2</sub> 100 mg/L under PUV process. Our findings suggest that US can be more effective compared to PUV for the degradation of off-flavors in aspect of energy consumptions.
한종훈,이상호,이철진,임영섭,박찬샘 한국가스학회 2010 한국가스학회지 Vol.14 No.6
Especially in Korea, LNG terminals commonly have huge scale because of the high demand of natural gas, and for the safe operation of terminal wide observation on temperature is necessary. That is the reason why the terminal has thermometer all over the facility but another information, flow rate, is insufficient. By the way, in pipeline, temperature difference is highly related with flow rate and with some simple assumptions, we can estimate flow rate. And through the steady state data reconciliation, the flow rate data become more reliable. In this research, we will study about flow rate data reconciliation method for LNG terminal and case study. 국내의 LNG 터미널은 일반적으로 대형화 되어있다. 그런데 이런 대형화된 터미널의 안전한 관리를 위해서는 전시설에 대한 온도 관측이 필요하며 따라서 터미널 내 모든 시설에는 온도센서가 다수 존재한다. 하지만 터미널의운영, 관리 및 안전사고 예방을 위해서 또 파악해야 하는 정보 중 하나가 유량인데 보통 부족한 경우가 많다. 그런데배관의 온도 정보는 유량과 밀접한 관련을 맺고 있고 이를 통해 유량은 몇 가지 가정을 통해서 쉽게 추산할 수 있다. 이렇게 발생된 유량 데이터는 오차를 갖고 있을 수 있기 때문에 이를 정상상태 데이터 보정(steady state data reconciliation)을 활용하면 보다 신뢰성 있는 데이터를 얻을 수 있다. 본 논문에서는 이러한 LNG 터미널 데이터 보정 방법에 대해설명하고 사례연구를 통해 얼마나 신뢰성 있는 데이터를 제공하는지에 대해서 기술하고자 한다.