http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
휴대폰용 연료전지 전원공급 시스템 개발 및 충방전 특성 연구
한재성,김영솔,박은성,Han, Jae-Sung,Kim, Young-Shol,Park, Eun-Seong 한국전기화학회 2002 한국전기화학회지 Vol.5 No.1
본 연구는 메탄올과 공기를 이용하여 상온, 상압에서 전기를 발생시키는 휴대폰용 전원공급 장치의 개발에 관한 것이다. 이 장치는 직접 메탄을 연료전지(DMFC)와 Back-up전지가 병렬로 연결되어 있어, 통화시 소요 전력의 최대 $50\%$ DMFC가 공급하고 나머지 부분은 Back-up 전지가 공급한다. 또한 통화 대기시에는 DMFC가 $100\%$ 필요 전력을 공급하고, 잉여 전력으로 Back-up전지를 충전한다. 상기 DMFC는 유효면적이 $9cm^2$인 8개의 단위전지가 직렬로 연결되어 있으며, 휴대폰의 작동 전압 범위인 2.5-3.9V의 전압을 출력한다. We report a fuel cell power supply unit for mobile phone which operates at room temperature and ambient pressure using liquid methanol and air. The unit consists of a direct methanol fuel cell (DMFC) and a back-up battery connected parallely to the fuel cell. DMFC supplies half of the required power and the back-up battery supplies the other half during talk mode. In standby mode, DMFC covers $100\%$ of the required power and charges the back-up battery as well, Eight unit cells, each having $9 cm^2$ of active area, were connected in series in order to raise the output volotage to $2.5\~3.9V$, which is typical for most mobile phones.
실시간 트래픽 분석을 통한 분산 서비스 거부 공격 대응 시스템의 설계 및 구현
한재성(Jae-Sung Han),김효곤(Hyo-Gon Kim) 한국정보과학회 2010 한국정보과학회 학술발표논문집 Vol.37 No.1D
분산 서비스 거부 공격 탐지를 위한 많은 연구와 개발이 진행 되고 있다. 하지만 분산 서비스 거부 공격의 유형은 계속 변화되어 가고 있어서 새로운 유형의 분산 서비스 거부 공격의 완벽한 탐지는 현실적으로 불가능하다. 본 논문에서는 알려진 유형의 분산 서비스 거부 공격의 탐지뿐만 아니라 새로운 유형의 분산 서비스 거부 공격 탐지를 위하여 실시간으로 트래픽을 모니터링 하고 분산 서비스 거부 공격으로 의심 되는 트래픽을 조기에 탐지하고 신속하게 대응이 가능 한 시스템의 설계와 구현에 관하여 기술 한다.
WPAN에서 통신 노드간 홉 수를 줄이기 위한 블루투스 스캐터넷 형성 및 관리 알고리즘
이정우,한재성,박성한,Lee, Jung-Woo,Han, Jae-Sung,Park, Sung-Han 대한전자공학회 2005 電子工學會論文誌-TC (Telecommunications) Vol.42 No.9
블루투스는 마스터와 슬레이브 간에 피코넷을 구성하며, 피코넷 네부에서는 시분할 방법으로 통신을 하며 이러한 피코넷이 모여 스캐터넷을 구성한다. 블루투스의 통신은 주파수 홉핑을 사용하기 때문에 여러개의 피코넷이 존재하거나 많은 수의 장치가 연결될 경우에는 스캐터넷이 필요하다. 블루투스 기술규격에는 스캐터넷의 형성 방법에 대하여 구체적으로 정의하지 않고있다. 기존에 제안되고 있는 스캐터넷 형성알고리즘은 스캐터넷의 토폴로지가 트리형태가 되도록 구성한다. 그렇지만 기존의 방법은 트리를 구성함에 있어서 스캐터넷 통신의 기본단위가 피코넷이라는 블루투스 통신의 특성을 간과하고 있다. 본 논문에서는 스캐터넷을 이루고 있는 피코넷에서 효율적인 전송률을 보장할 수 있는 형태로 트리를 구성함으로써, 스캐터넷 전체의 평균 전송효율을 높이는 방법을 제안한다. A Piconet consists of Master device and several Slave devices. Master and Slave devices are transmitted using TDD (Time Duplex Oivision) in a Piconet. A Scattemet constructed by several Piconets communicates by a Piconet. Bluetooth Specification defines the meaning of a Scatternet. But the formation and scheduling method is not defined. For the efficient formation of a Scatternet, the preceding research proposes a tree-shape topology Scatternet. But this research passes over the characteristic of Bluetooth transmission carried out by a Piconet in the Scattemet. So this Paper proposes a efficient throughput tree formation Scatternet algorithm To improve the throughput of a Scatternet, this paper proposes a tree tolopology that guarantees the efficient throughput of a Piconet
폴리에틸렌테레프탈레이트와 나일론 6 알로이 섬유의 구조와 성질(II) -알로이 섬유의 제조와 물성 분석-
민병길,임목근,이광상,유영출,한재성,Min, Byung Gil,Lim, Mok Keun,Lee, Kwang Sang,Yu, Yeong-Chool,Han, Jae Sung 한국섬유공학회 2014 한국섬유공학회지 Vol.51 No.5
The preparation of polymer alloys from immiscible blends of poly(ethylene terephthalate) (PET) and nylon 6 was investigated using epoxy as a reactive compatibilizer during melt compounding. The domain size of nylon 6 in the PET matrix could be controlled to the submicron level by addition of 0.5-2.0 wt% epoxy to the blends. Melt spinning of the alloys were successfully performed in a pilot scale. The alloy fibers containing 5-10 wt% nylon 6 exhibited reasonable mechanical properties, with up to 3 g/d tenacity and 35% elongation. Moreover, the alloy fibers showed improved moisture absorption properties compared with that of neat PET fibers.