http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Cu-Al2O3 의 분산강화 및 기계적 성질에 관한 연구
한원택,강춘식 대한금속재료학회(대한금속학회) 1981 대한금속·재료학회지 Vol.19 No.6
Alumina dispersed copper alloy was manufactured as a material requiring high temperature strength, endurance to thermal fatigue, and good thermal and electrical conductivity. The material was fabricated by mixing, compaction, sintering at hydrogen atmosphere, and hot pressing, where the size of Cu powder was 3∼5㎛ and those of Al₂O₃powder were 3∼5㎛, 0.06 and 0.30㎛. The amount of alumina in the specimen varied from 0.5 to 5 percent. The optimum sintering was obtained at 1,000℃ for 1hr, and micro vickers hardness at room temperature was maximum at Cu-3.0w/o Al₂O₃. Dispersion strengthening effects were found considerable at high temperature. When the amount of alumina in the dispersion strengthened alloy increase more than 3%, the hardness and strength decreased due to coalescence of dispersion, and decrease in density. Cu-3.0 w/o Al₂O₃was discovered to increase the tensile strength by 67% compared with pure Cu.
한원택 에스케이텔레콤 (주) 2000 Telecommunications Review Vol.10 No.1
기하급수적으로 늘어나고 있는 이동전화 및 인터넷 통신을 통한 음성과 동영상 등 정보의 홍수 속에 사회는 대량의 정보를 빠른 속도로 주고 받는 기술을 요구하고 있다. 이러한 정보화 사회의 도래는 초고속 광통신을 통하여 가능하게 되었으며, 따라서 광섬유 및 광섬유소자가 광통신망의 설치 및 운영에 있어서 차지하는 비중이 점차 증대되고 있다. 본 논문에서는 광통신망의 시스템 구축에 있어서 핵심기술인 광섬유, 광섬유 소자 및 그 응용기술을 위주로 고찰하였다. II장에서는 광섬유 증폭기의 증폭원리, 증폭기용 광섬유의 제조방법, 그리고 그 특성과 응용에 대해, III장에서는 핵심 광섬유 소자로서의 광섬유 격자와 광섬유 격자용 광섬유의 제조 및 특성, 그리고 그 용용기술에 관해 논의하였다. IV장에서는 광섬유의 분산 특성과 분산조절 광섬유에 대하여 서술하였고 V장에서는 국내외 광섬유 및 광섬유 소자 관련 기술동향과 향후의 전망을 간략하게 설명하였다.
Effect of Helical Bending on Gain Beyond 1650-nm of an Er-Doped Optical Fiber Amplier
한원택,Pramod R. Watekar,Aoxiang Lin,주성민 한국물리학회 2008 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.53 No.3
An Er-doped optical fiber amplifier sensitized with Yb ions was developed with a two-coresthree-claddings layer structure. Extended L-band amplification over 1650-nm was achieved upon 980-nm pumping with helical bending. The gain after helical bending was about 12 dB at 1700-nm.