http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중간저장조의 저장시간과 저장제품의 제약을 고려한 다품종 회분공정의 조업완료시간 알고리즘
하진국,이경범,이인범,이의수 제어·로봇·시스템학회 2003 제어·로봇·시스템학회 논문지 Vol.9 No.9
The determination of completion time constitutes an important step in developing algorithms for short-term production scheduling. Existing completion time algorithms of multi-product batch processes often assume that intermediate storage tanks are always available when it is needed. In this paper, we consider a serial multi-product batch plants with ZW and NIS policy intermediate storage tank. We limit storage residence time and allocated products in the intermediate storage tank to minimize the quality change of the stored material as well as to reduce the clearing time during product change. A set of recurrence relations is suggested to calculate the completion times for the given batch sequence of products on all processing units. Also analytic solution for the suggested model is solved by a graphical method.The effectiveness of these results is proved by a few illustrative examples.
하진국 ( Jin Kuk Ha ),이의수 ( Euy Soo Lee ) 한국화학공학회 2005 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.43 No.5
불연속 화학공정은 소비자 수요에 탄력성 있게 대처할 수 있는 장점이 있는 반면에 그 특유의 동특성 때문에 복잡하고, 계획된 조업 시간과 실제 조업 시간 사이에서 외란(disruption) 또는 불확실 변수(uncertainty)에 의한 차이가 자주 발생하는 단점이 있다. 이에, 본 논문에서는 예측 생산계획(predictive scheduling)에 의해 결정된 생산계획에서 미래에 발생하는 공정 변수 값의 변화를 실시간으로 예측 생산계획을 수정, 제시하여 주는 생산 계획 시스템인 동적 생산계획(reactive scheduling) 기법을 개발하였다. 불확실 인자를 고려한 동적 생산계획에서, 본 논문에서는 장치 이상 (equipment failure)이 발생하였을 때 공정 운전조건의 변화를 실시간으로 반영하여, 예측 생산계획(predictive scheduling) 모델에 의하여 제시된 전체 생산 계획을 최대한 유지하고 공정 변수의 변화를 실시간으로 반영하기 위하여 right shift rescheduling과 total regeneration 기법을 사용하였다. 또한, 불확실 인자의 발생 전후의 predictive scheduling과 reactive scheduling 간의 변화 정도를 측정하는 수단인 schedule stability 위하여, 본 논문에서는 수정된 sequence deviation과 percentage change in makespan을 사용하여 제안된 동적 생산계획의 안정성을 측정하였다. 본 논문에서 제안한 동적 생산계획 시스템은 기존에 제시되었던 경험 법칙에 의한 결과값에 비해 좋은 결과를 보여주었다. We propose a new optimization framework for the reactive scheduling. The proposed rescheduling scheme is specially focused on how to generate rescheduling results when equipment failure occurs. The approach is based on a continuous-time problem representation that takes into account the schedule in progress, the updated information on the batches still to be processed, the present plant state, the deviations in plant parameters and the time data. To update the predictive scheduling, we used right shift rescheduling and total regeneration when equipment failure occurs. And, a practical solution to the rescheduling problem requires satisfaction of two often confliction measures: the efficiency measure that evaluates the satisfaction of a desired objective function value and the stability measure that evaluates the amount of change between the schedules before and after the disruption. In this paper, the efficiency is measured by the makespan of all jobs in the system. And, the stability is measured by the percentage change in makespan and the modified sequence deviation in the predictive scheduling and rescheduling.
Bi-2223/Ag 고온초전도 선재의 기계적 특성 평가
하홍수,이동훈,양주생,최정규,윤진국,하동우,오상수,권영길,김상철 한국초전도저온공학회 2002 한국초전도저온공학회논문지 Vol.4 No.1
Evaluation of the mechanical properties of Bi-2223/Ag HTS tapes was carried out by the tension and bending tests. Most of the Bi-2223/Ag tapes retained critical current up to 10 kgf/mm$_2$ axial tension stress, and 0.2% tension strain at room temperature. Applied tension strain exceeding 0.3% in superconducting tapes at 77 K leaded to rapid degradation of the critical current. It was observed that the more filaments, the better axial tension property at 77 K, self-field The influence of bending strain on critical current degradation was revealed to be less sensitive for Bi-2223/Ag HTS tapes with a more number of filaments and higher silver ratio.
전열처리 조건에 따른 Bi-2223 초전도 선재에서의 특성 변화
하동우,하홍수,오상수,이동훈,윤진국,양주생,최정규,권영길 한국초전도학회 2003 Progress in superconductivity Vol.4 No.2
A lot of efforts have been focused on the optimization of PIT parameters for Bi-2223/Ag wire. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking, drawing process. Before rolling process, round wires were pre -annealed at 760 - 820 $^{\circ}C$ and low oxygen partial pressure. We confirmed that pre-annealing step was to transform Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases. However Bi-2223 phases also were formed at higher than 76$0^{\circ}C$ of pre-annealing temperature. The engineering critical current densities (Je) of Bi-22231Ag tapes were sintered at low oxygen partial pressure were higher than t hat of the wires sintered at air. We could achieve 6500 A/${cm}^2$ of Je for the tape that was initially kept at slightly higher temperature than that of normal heat treatment.