http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
쿠마르디네쉬,이상봉,전용현,박찬희,김철생 한국공업화학회 2018 Journal of Industrial and Engineering Chemistry Vol.65 No.-
Here, we report multi-component plasmonic core–shell nanodendrites (Pt@rGO-AuNPs) composed of nano-sized reduced graphene oxide coated gold nanoparticles as a multiple photo-system modality. The prepared Pt@rGO-AuNPs took 40, 60, and 75 min with the pseudo first-order rate constants 0.112 min−1 0.069 min−1 and 0.048 min−1 to completely degrade (≥98%) methylene blue, methyl red, and methyl orange, respectively, at room temperature. Pt@rGO-AuNPs also showed a high photothermal effect (temperature ≥43° C in 5 min, 808 nm laser, 6 W/cm2) and found to have robust morphology during recyclability for at least five cycles in both photocatalytic and photothermal processes.
쿠마르디네쉬,국 현,Amjad Ali 한국공업화학회 2016 Journal of Industrial and Engineering Chemistry Vol.38 No.-
One-pot solvent-free amidation of natural triglycerides (pongamia and jatropha oil) was investigatedusing Li or Na or K doped CaO nanoparticles as heterogeneous catalyst. Complete conversion (98 2%) ofpongamia oil and jatropha oil to fatty diethanolamides has been obtained in 0.75 h and 1 h, respectively,using 5 wt% of Li doped CaO (2-LiH/CaO-400) and 6:1 molar ratio of diethanolamine/oil at 90 8C. The samecatalyst was active up to six catalytic recycles for amidation of both feedstocks. The rate of reaction andactivation energy for the same reaction process was calculated as 0.101 min 1 and 48.3 kJ mol 1,respectively.
3차원 실장을 위한 TSV의 Cu 전해도금 및 로우알파 솔더 범핑
정도현,쿠마르산토쉬,정재필,Jung, Do hyun,Kumar, Santosh,Jung, Jae pil 한국마이크로전자및패키징학회 2015 마이크로전자 및 패키징학회지 Vol.22 No.4
Research and application of three dimensional packaging technology in electronics have been increasing according to the trend of high density, high capacity and light weight in electronics. In this paper, TSV fabrication and research trend in three dimensional packaging are reported. Low alpha solder bumping which can solve the soft error problem in electronics is also introduced. In detail, this paper includes fabrication of TSV, functional layers deposition, Cu filling in TSV by electroplating using PPR (periodic pulse reverse) and 3 step PPR processes, and low alpha solder bumping on TSV by solder ball. TSV and low alpha solder bumping technologies need more studies and improvements, and the drawbacks of three dimensional packaging can be solved gradually through continuous attentions and researches.
무창기공형 집열기 내 잉여 에너지의 축열을 통한 축사 난방 효율 평가
문병은 ( Byeong Eun Moon ),쿠마르바삭자얀타 ( Jayanta Kumar Basak ),아룰모지엘란제챤 ( Elanchezhian Arulmozhi ),이준현 ( Jun Hyeon Lee ),이덕현 ( Deog Hyun Lee ),시할라스타비사크 ( Thavisack Sihalath ),김현태 ( Hyeon Tae Kim ) 한국농업기계학회 2020 한국농업기계학회 학술발표논문집 Vol.25 No.1
축사 내 무창기공형 집열기의 적용은 겨울철 환기 및 구조적 에너지 손실을 줄일 수 있을 뿐만 아니라, 실내 공기 질 또한 개선할 수 있는 좋은 해결책이다. 그러나 특정기간 내 발생하는 열에너지는 오히려 축사내부를 과열시키는 문제점을 가지고 있다. 따라서 본 연구에서는 축사 내 무창기공형 집열기의 적용 시 발생하는 초과 열에너지의 저장 및 활용을 위해 잠열축열재를 적용하여 축사 내부온도 변화 및 축열 시스템의 열 성능을 각각 분석하였다. 실험은 경상대학교 내 실험돈사에서 수행되었으며, 무창기공형 집열기는 실험돈사 남쪽 벽면 내 10 m2의 넓이로 설치하였다. 축열 시스템은 돈사 내 집열기가 설치된 남쪽 벽면에4.08 m2의 넓이로 설치하였으며, 실험에 사용된 잠열축열재는 Na2SO4ㆍ10H2O로 총 91.98 kg을 설치하였다. 실험기간 동안 집열기 내부온도는 일 중 외기온 대비 약 35℃ 높은 최고 65℃까지 상승하였으며, 일사량과 집열기의 효율은 비선형 상관관계를 확인하였다(R2 = 0.58). 집열기 내부에서 발생하는 초과 에너지의 축열 및 방열을 통해 실험기간 동안 평균 축열 시간은 약 5시간 50분, 평균 방열시간은 약 2시간 33분으로 측정되었다. 또한, 축열 시스템 내 축열에 따른 공급 공기의 최고 온도는 최고 약 30℃ 감소한 것으로 측정되었으며, 방열 직후 공급 공기의 온도는 약 10℃ 상승하였다. 일사량과 UTC 내 에너지 발생량(R2 = 0.96) 및 일사량과 축열 에너지(R2 = 0.87)의 비선형적 관계를 각각 검증하였다. 실험기간 동안 집열기 내 평균 에너지 발생량은 약 13,548.21 kcal/day, 평균 축열 및 방열 에너지는 약 7,739.78 kcal/day, 1,793.47 kcal/day로 각각 측정되었다.
문병은 ( Byeong Eun Moon ),이덕현 ( Deog Hyun Lee ),최경문 ( Gyeong Mun Choi ),쿠마르바삭자얀타 ( Jayanta Kumar Basak ),부젤아닐 ( Anil Bhujel ),칸파와드 ( Fawad Khan ),아룰모지엘란체쟌 ( Elanchezhian Arulmozhi ),자이후니무스타파 ( Mustafa J 한국농업기계학회 2020 한국농업기계학회 학술발표논문집 Vol.25 No.2
작물을 생산, 가공 후 발생하는 폐기물의 불법적인 소각 및 방치, 투기는 토양 및 대기 오염의 한 원인이 된다. 이러한 문제를 해결하기 위해 농업 폐기물을 처리하고 재사용하여 자원 및 원료로 사용하는 옥수수대 폐기물 수거용 원형 베일러가 개발되었다. 옥수수대의 자원화 및 원료화 효율을 높이기 위해 작물을 최대한 많이 절삭, 수거하는 것이 중요하며, 이를 위해서는 옥수수대 절삭 높이 및 절삭 날, 속도가 많은 영향을 끼친다. 따라서 본 연구에서는 절삭 날인 쵸퍼의 각도와 회전 속도, 그리고 주행속도를 이용하여 옥수수대 조건별 작물 절삭 성능을 평가, 분석하였다. 실험장치는 제어 및 전원부, 차폐/가드부, 전동모터, 절삭부(로터 및 쵸퍼), 작물 이동용 베드로 구성하였다. 작물은 베드를 통해 이동하며 절삭부의 절삭 날에 의해 절삭된다. 제어부에서 베드의 이동속도와 절삭 날의 회전 속도의 설정이 가능하다. 지면의 흙이나 다른 불순물들이 같이 베일링될 경우, 자원화 및 원료화의 효율성이 낮아지기 때문에 쵸퍼의 절삭 성능 분석을 위해 쵸퍼의 측정 높이는 지면으로부터 약 3 cm 이상, 5 cm에 가장 가까운 값을 가졌을 때 최상의 절삭 환경이라 판단하였다. 실험은 쵸퍼의 각도(30°, 45°, 60°) 및 회전속도(1,100, 1,750, 2,250 rpm), 이송대의 이동속도(2.5, 5.0, 7.5 km/h)의 변수로 실험을 실시하였다. 쵸퍼의 각도가 45˚, 회전속도는 2,250 rpm, 이송대의 이동속도는 7.5 km/h일 때 평균적으로 절삭 길이가 짧았다. 따라서 쵸퍼의 각도는 45˚, 쵸퍼의 회전속도는 2,250 rpm, 이송대의 이동속도는 7.5 km/h일 때 최상의 절삭 환경이라 판단된다.
라제쉬쿠마르라즈(Dr. Rajesh Kumar Raj) 한국요가학회 2018 요가학연구 Vol.- No.19
해독방법은 점점 증가하고 있으며 요가 수행과 관련하여 해독방법을 검토할 필요가 있다. 해독과정을 완전히 제어하기 위해서는 신속하게 문제의 핵심에 도달 할 수 있는 치료법을 사용해야 한다. 요가는 몸에서 독소를 제거하는데 도움이 된다. 킬레이션 (Chelation,독소제거) 요법과 하타 (Hatha) 요가가 그 결과를 측정할 수 있다. 요가는 나디 (nadi) 와 활동 (vritti) 를 각각 정화하여 프라나 (pr ā na) 와 마음을 정화할 수 있다고 생각한다. 요가치유에는 독소를 제거하기 위한 정화 (Śudḍḥi, 슛디) 의 수행법이 있다. 이러한 슛디 (Śudḍḥi) 들은 신체, 마음 그리고 의식과 같은 다양한 단계 에서 이루어진다. 슛디에는 해독을 돕는 것뿐만 아니라 요가와 명상에 대한 더 높은 수행 준비를 위한 몇 가지 수행법이 있다. Detoxification practice is increasing frequently and we need to examine it with the reference of yoga practices. In order to gain total control over the process of detoxification one will have to turn to the therapies which can rapidly get to the core of the problem. Yoga helps to remove toxin from the body. Chelation therapy and hatha yoga can be measure issues. Yoga believes on purification of prana and mind by cleansing of nadis and vrittis respectively. Yoga therapy has practices of “Śudḍḥi” to remove the toxins. These Śudḍḥi’s are done in various levels like body, mind and consciousness. There are several practices in Śudḍḥi which not only help in detoxification but also prepares for higher practices of yoga and meditation.