하나로 조사시험용 다공 원통헝 구조물의 온도해석

최영진,강영환,이영신,Choi Young-Jin,Kang Young-Hwan,Lee Young-Shin 한국전산구조공학회 2004 한국전산구조공학회논문집 Vol.17 No.4

재료나 핵연료조사시험에서 다공원통형구조물의 모든 구성품에서 감마열 및 fission과 같은 열원이 발생한다. 본 연구는 조사시험중 다공원통형구조물의 열적건전성을 평가하기 위해 온도분포에 대한 일반해를 구하는데 그 목적이 있다. 다공원통형 구조물의 온도해석을 위해 2차원 열전토 방정식을 이용하였다. 유한요소해석은 ANSYS 6.1을 이용하여 수행하였다. 다공원통형 구조물의 온도해석에서 이론해석결과와 유한요소해석결과는 홀의 개수가 3개 이하에서는 온도가 서로 잘 일치하는 것으로 나타났다. 구조물의 홀 개수가 4개일때, 온도분포해석에 대한 두 결과의 차이가 증가하였다. During the irradiation tests of material and fuel rod, all components of the cylindrical structure with multiple holes act like heat sources due to high gamma heat and fission heat. The objective of this study is to formulate the general solution for the temperature distribution to estimate the thermal integrity of structure during irradiation tests. For the temperature distribution analysis, the two-dimensional heat conduction theory is used. The unmerical analysis is performed by the commercial finite element analysis code, ANSYS 6.1. If the cylindrical structure with hole number would not exceed three holes, the analysis results and finite element results are good agreement together. For the structure with four holes, the discrepancy between FE results and analysis results of the structural temperature distribution is increased.

리튬이온전지용 산화갈륨 (β-Ga₂O₃) 나노로드 (Nanorods) 음극 활물질의 물리적.전기화학적 특성

최영진,류호석,조규봉,조권구,류광선,김기원,Choi, Young-Jin,Ryu, Ho-Suk,Cho, Gyu-Bon,Cho, Kwon-Koo,Ryu, Kwang-Sun,Kim, Ki-Won 한국전기화학회 2009 한국전기화학회지 Vol.12 No.2

고순도의 $\beta-Ga_{2}O_{3}$ 나노로드(nanorods)가 니켈산화물 나노입자를 촉매로 사용하고 갈륨금속분말을 원료물질로 이용하여 화학기상증착법으로 합성되었다. 전계방출형 주사전자현미경을 이용하여 $\beta-Ga_{2}O_{3}$ 나노로드를 관찰한 결과, 평균직경은 약 160 nm 그리고 평균길이는 $4{\mu}m$였으며 vaporsolid(VS) 성장기구를 통하여 성장되었음을 알 수 있었다. X-선 회절시험과 고분해능 투과전자 현미경을 이용한 결정구조 분석 결과, 합성된 나노로드의 내부는 단사정계 결정구조를 가지는 단결정의 $\beta-Ga_{2}O_{3}$로 이루어져 있고 외벽은 비정질 갈륨옥사이드로 이루어진 코어-셀 구조로 구성되어 있는 것을 확인하였다. 합성된 $\beta-Ga_{2}O_{3}$ 나노로드를 음극 활물질로 사용하여 전극을 제조하고 전기화학적 특성을 분석한 결과, 리튬/$\beta-Ga_{2}O_{3}$ 나노로드 전지는 첫 방전 시 867 mAh/g-$\beta-Ga_{2}O_{3}$의 높은 용량을 나타내었으나 초기 비가역 용량으로 인해 62%의 낮은 충 방전 효율을 나타내었다. 그러나 5 사이클 이후 높은 충 방전 효율을 보이며 30 사이클까지 안정된 사이클 특성을 나타내었다. $\beta-Ga_{2}O_{3}$ nanorods were synthesized by chemical vapor deposition method using nickel-oxide nanoparticle as a catalyst and gallium metal powder as a source material. The average diameter of nanorods was around 160 nm and the average length was $4{\mu}m$. Also, we confirmed that the synthesis of nanorods follows the vapor-solid growth mechanism. From the results of X-ray diffraction and HR-TEM observation, it can be found that the synthesized nanorods consisted of a typical core-shell structure with single-crystalline $\beta-Ga_{2}O_{3}$ core with a monoclinic crystal structure and an outer amorphous gallium oxide layer. Li/$\beta-Ga_{2}O_{3}$ nanorods cell delivered capacity of 867 mAh/g-$\beta-Ga_{2}O_{3}$ at first discharge. Although the Li/$\beta-Ga_{2}O_{3}$ nanorods cell showed low coulombic efficiency at first cycle, the cell exhibited stable cycle life property after fifth cycle.

국립중앙도서관 소장의 「Jusikbangmun (주식방문)」을 통해 본 조선 후기 음식에 대한 고찰

최영진,Choi, Young-Jin 한국식생활문화학회 2016 韓國食生活文化學會誌 Vol.31 No.6

This study is a comparative study on a cookbook published in 1900s titled "Jusikbangmun", one of collections of the National Central Library, along with other cookery books in Joseon Dynasty in the late 1800s to early 1900s. "Jusikbangmun" consists of 51 recipes, including 45 kinds of staple foods and six kinds of brews. More than 60% of the recipes deal with staple dishes and side-dishes, whereas the rest deal with ceremonial dishes and drinking. The "Jusikbangmun" applies a composite method of cooking from boiling and steaming to seasoning with oil spices. The ingredients are largely meats rather than vegetables, which is distinguished other cookery books in the Joseon Dynasty. Only "Jusikbangmun" deals with such peculiar recipes as 'Kanmagitang', 'Bookyengsumyentang', 'Jeryukpyen', 'Yangsopyen', and 'Dalgihye'. It is estimated that "Jusikbangmun" was published around the 1900s based on findings that "Jusikbangmun" is more similar with "Buinpilgi" and "Joseonyorijebeop" in the early 1900s than with "Kyuhapchongseo", "Siyijenseo" and "Jusiksieui" in 1800s. Therefore, "Jusikbangmun" is a valuable resource, we can use understand the food culture of the late Joseon period.

미래 식량자원으로써 장수풍뎅이 유충의 영양학적 평가

최영진,범미기,김은경,이슬비,황연현,장영호,배성문,Choi, Young-Jin,Fan, Meiqi,Kim, Eun-Kyung,Lee, Seul-bi,Hwang, Yeon-hyeon,Jang, Yeong-Ho,Bae, Sung-Mun 한국식품과학회 2020 한국식품과학회지 Vol.52 No.6

식용 곤충은 인구증가에 따른 식량 문제를 해결하기 위한 하나의 방법으로 제시되며 최근 곤충의 생리활성 기능과 관련한 연구가 많이 수행되고 있다. 반면 식품으로서 활용 가능한 기초연구는 부족한 실정으로 본 연구에서 장수풍뎅이 유충의 단백질 대체 자원으로서 영양학적 기능을 규명하기 위한 실험을 실시하여 장수풍뎅이 유충 단백질(ADP)의 식이 효율, 단백질 효율, 순 소화율 등을 동물실험을 통해 알아보았다. 4주령 SD-rat 24마리를 이용하여 각 그룹 당 8마리 3그룹으로 실험을 실시하였다. 실험군은 사료 내 전체 kcal 20%가 Casein 단백질로 구성된 사료를 식이 하는 일반 식이군(Con), 전체 kcal 20%가 장수풍뎅이 유충의 단백질로 구성된 사료를 식이 하는 장수풍뎅이 유충 단백질식이군(ADP), 그리고 체내 대사작용에 의해 배설되는 단백질(metabolic fecal nitrogen)을 측정하기 위하여 단백질 무 첨가 식이군(NP, non-protein diet)으로 설정했다. 4주간 식이를 공급하여 장수풍뎅이 유충 단백질의 식이 효율(Food Efficiency Ratio, FER), 단백질 효율(Protein Efficiency Ratio, PER), 순 소화율(true digestibility, TD)을 평가했다. 본 실험 결과 식이 효율은 Con군에서 0.52, 장수풍뎅이 유충 단백질 섭취군에서 0.41로 ADP에서 유의적으로 낮은 수준을 보였다. 단백질 효율은 ADP군에서 2.39, Con군에서 2.63으로 ADP군은 Con군에 비해 낮았으나 유의적인 차이는 없었다. 순 소화율은 Con군에서 91%, ADP군에서 80%로 나타났으며 통계적인 유의적 차이는 없었다. 장수풍뎅이 유충의 순 소화율은 80%로 나타났으며 콩과류의 단백질 순 소화율 64-77%에 비해 높은 수준을 보였다. Edible insects might be used as a means to solve food insecurity caused by population growth. Many studies have investigated the biological activity of insects; however, few studies have investigated the nutritional value of insects. Therefore, the aim of this study was to investigate the nutritional value of Allomyrina dichotoma larva protein (ADP) as a source of protein replacement. In vivo studies were conducted to determine the food efficiency ratio (FER), protein efficiency ratio (PER), and true digestibility (TD) of ADP. Experiments were conducted in 3 groups of 8 animals per group using twenty-four 4-week-old SD rats. The experimental groups included the general diet group (Con), in which 20% of the total Kcal in the diet was composed of casein protein, and the ADP group (ADP), in which 20% of the total Kcal was composed of ADP protein, and a non-protein diet group (NP) to measure the protein (metabolic fecal nitrogen) excreted by metabolic processes in the body. As a result of this experiment, we found that the FERs were 0.52 and 0.41 in the casein protein intake (Con) and ADP groups, respectively, thus showing a significantly lower level in the ADP group. The PERs of ADP and Con were 2.39 and 2.63, respectively. The TD of Con and ADP were 91% and 80%, respectively.

BaTi₄O₉계 세라믹스의 저온소결 및 마이크로파 유전특성

최영진,신동순,박재환,남산,박재관,Choi, Young-Jin,Shin, Dong-Soon,Park, Jae-Hwan,Nahm, Sahn,Park, Jae-Gwan 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.2

저온동시소성 기능성 기판용 소재로 활용하기 위하여 Ba $Ti_4$ $O_{9}$계 마이크로파 유전체에 저융점의 유리 프리트를 첨가하여 저온소성 거동 및 마이크로파 유전특성을 고찰하였다. 유리 프리트의 첨가량이 증가할수록 소결 하한 온도가 낮아졌으며, l0wt%의 유리 프리트를 첨가하였을 때 875$^{\circ}C$의 소성온도에서 상대밀도 98% 이상을 나타내는 충분한 소결이 이루어졌다. 이 때 소결체의 마이크로파 유전특성은 유전율 32, 품질계수 9000 GHz, 공진주파수 온도계수 10 ppm/$^{\circ}C$으로 평가되었다. 유리의 첨가량이 증가하면서 소결 과정에서 주상인 Ba $Ti_4$ $O_{9}$가 Ba $Ti_{5}$ $O_{11}$상과 $Ba_4$ $Ti_{13}$ $O_{30}$상으로의 변화하는 현상도 관찰되었다. Effect of glass addition on the low-temperature sintering and microwave dielectric properties of $BaTi_4O_9$-based ceramics were studied to develop the materials for the functional substrate of low-temperature co-fired ceramics. When 10 wt% of glass was added, sufficient densification was obtained and the relative density more than 98% was reached at the sintering temperature of$875{\circ}C$. The microwave dielectric properties were k=32, Q*f=9000 GHz, ${ au}_f$=10 ppm/${\circ}C$. As the amount of glass increased, phase decompositions from $BaTi_4O_9;to;BaTi_5O_{11};and;Ba_4Ti_{13}O_{30}$ was observed.

LP-MOCVD법으로 합성된 ZnO 나노선의 구조 및 광학적 특성

최영진,박재환,박재관,Choi, Young-Jin,Park, Jae-Hwan,Park, Jae-Gwan 한국결정학회 2006 韓國結晶學會誌 Vol.17 No.1

MOCVD 공정방법에 의해 수직정렬된 ZnO 나노선을 합성하고 공정조건 제어에 의해 합성되는 나노선의 물리적, 광학적 특성이 어떻게 변화하는지를 고찰하고자 하였다. 온도 및 산소분압제어 등의 공전변수 제어를 통하여 ZnO 나노 구조체는 나노선, 나노로드 뿐만 아니라 나노바늘 (nano-needle) 등 다양한 구조로 변화되었으며 그 직경 및 길이도 제어가 가능하였다. 전체적으로 양호한 특성의 wurzite 구조를 나타내었으며 기판에 수직인 방향으로 [0001] 방향으로 성장하였다. 광학특성에서는 나노선 직경이 작아질수록 주방출 피크의 천이현상이 관찰되었다.

의료기관 홍보에 대한 의료기관 종사자의 태도 및 인식

최영진,임복희,황병덕,Choi, Young-Jin,Im, Bock-Hee,Hwang, Byung-Deog 보건의료산업학회 2009 보건의료산업학회지 Vol.3 No.2

The aim of this study is to provide basic data in establishing marketing strategies for hospital by analyzing effective public relations of hospital through attitude and awareness on medical public relations by employee of hospital. The awareness on medical public relations by employee of hospitals were highest among aged 50s or above and above university graduates from the level of education, and from hospital management from types of duties and from those who have worked for more than 10 years. The methods medical public relations positively regarded by employee of hospitals were 'Appearing at health programs' followed by 'Periodicals like magazines and books', 'Issuing of hospital bulletins to homes of patients visiting hospitals'.

개인정보 보호 분야 공동규제의 성공요인과 발전방향에 관한 연구

최영진,Young Jin Choi 한국IT서비스학회 2023 한국IT서비스학회지 Vol.22 No.5

The Personal Information Protection Commission has been promoting the adoption of co-regulation to replace/improve the existing self-regulation programs since 2022. While the Commission's co-regulation framework has received positive feedback for its contribution to address the regulatory issues, it has also faced criticism for being seen as "co-regulation in appearance only without any real differentiation from existing self-regulation." This study aims to examine the case of industry-specific co-regulation proposed by the Personal Information Protection Commission, with the objectives of 1) determining whether their approach can be categorized as a type of co-regulation with differentiation from the existing self-regulation programs, and 2) proposing improvements for successful regulation. The 'co-regulation' of the Commission can be classified as a form of co-regulation that differs with traditional self-regulation, as it involves government and private organizations collaborating to establish self regulatory codes reflecting industry-specific characteristics as well as provides interest groups with incentives to comply with the codes. The co-regulation framework is evaluated to some extent as successful, but there is still room for improvement in three major aspects. (1) When selecting the areas for co-regulation, a focus should be placed on areas where technological changes are rapid, and government regulations should be applied in areas where they are not. (2) It is necessary to enhance the expertise of regulatory agencies, and (3) ensuring the democratic nature of regulation, such as encouraging the participation of civil organizations, is necessary.

금속 Ca증기에 의한 고체 Nd 금속의 탈산

최영진,김상욱,전병서,송창빈,오윤석,이영주,Choi, Yonug-Jin,Kim, Sang-Wuk,Jeon, Byung-Seo,Song, Chang-Bin,Oho, Yoon-Seok,Lee, Young-Joo 한국재료학회 2017 한국재료학회지 Vol.27 No.5

As a basic study for the removal of oxygen in solid Nd metal by metal Ca vapour, by using the thermodynamic data such as ${\Delta}G-T$ diagrams and Nd-O and Nd-Ca equilibrium diagrams, the amount of residual oxygen in solid Nd metal formed based on deoxidation reaction by Ca vapour, instead of by direct contact of solid Nd metal and Ca solution, was determined. Deoxidation experiments were carried out for solid Nd metal in a temperature range of $890{\sim}970^{\circ}C$ for 1h to 4h and content of addition Ca of 0.6~1.8 g (5~15 wt% of solid Nd metal). As a result, it was found that as deoxidation temperature increased, dissolved oxygen decreased. Especially, it was observed that a small amount of Nd-Ca alloy liquid was formed on the surface of the solid Nd metal sample deoxidized at $970^{\circ}C$ for approximately 1 hour. Also, it was found that if the content of addition Ca was 1.8 g (15 wt% of solid Nd metal) the amount of produced Nd-Ca alloy increased slightly. However, for the Nd sample with which the deoxidation reaction was performed at $930^{\circ}C$ for 4h with content of addition of Ca of 1.5 g (13 wt% of Nd metal), the residual oxygen was found to decreased to 12.00 ppm.

대체 감미료를 사용한 Sponge Cake의 특성

최영진,김광옥,Choi, Young-Jin,Kim, Kwang-Ok 한국식품조리과학회 1990 한국식품조리과학회지 Vol.6 No.2

The characteristics of sponge cakes containing sucrose or other sweeteners for diabetes mellitus patients were investigated through physical measurement and sensory evaluation. The results are as follows: The physical properties of cake batters and cakes with sweeteners were different from each other in viscosity, specific gravity, standing height, firmness, and springiness. from the result of sensory evaluation, it was shown that cakes containing sorbitol and fructose had high quality even though they were not as good as cake with sucrose. However, cakes with saccarine and stevioside showed much difference compared with cake with sucrose. The characteristics of sponge cake with combined sweeteners (sorbitol plus stevioside) were compairable to those of sucrose cake. There was little difference in specific gravity. The result of sensory evaluation indicated the combined use of both sweetenes could produce bette cakes than either stevioside or sorbitol. Practical utilization of this cake would be provided under the sensory evaluation on these cakes by diabetes mellitus patients.