http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최승용,한건연,최현구 한국습지학회 2011 한국습지학회지 Vol.13 No.3
수위예측을 위해 개념적, 물리적 모형들을 포함한 다양한 유형의 기법들이 사용되고 있다. 그럼에도 불구하고 이러한 기법들 중 수위예측을 위해 단일의 우수한 모형을 선정하는 것은 매우 어려운 일이다. 최근에는 수문학적 과정의 복잡성으로 인해 기존 물리적 기반의 강우-유출 모형이 가지고 있는 단점들을 극복하고자 자료 지향형 수위예측 모형이 널리 도입되고 있다. 본 연구의 목적은 이러한 자료 지향형 모형 중 뉴로-퍼지와 회귀분석 모형의 수위예측에 대한 성능을 비교하는 것이다. 제안된 두 모형을 한강수계의 왕숙천에 대해 적용하였다. 제안된 두 모형의 성능을 평가하기 위해 평균제곱근오차, Nash-Suttcliffe 효율계수, 평균절대오차, 수정 결정계수와 같이 4개의 통계지표들을 사용하였다. 모의결과 뉴로-퍼지 수위예측 모형이 다중선형회귀 수위예측 모형보다 좀 더 나은 예측 결과를 나타내는 것을 확인할 수 있었다. 본 연구결과는 향후 중소하천에서 충분한 선행시간을 확보한 정확도 높은 홍수정보시스템의 구축에 활용할 수 있을 것으로 판단된다.
수심평균 혼합거리 난류 모형의 개발 및 와점성계수의 평가
최승용,한건연,황재홍 한국습지학회 2011 한국습지학회지 Vol.13 No.3
본 연구의 목적은 개수로에서 난류모의를 위한 2차원 모형을 개발하는데 있다. 연구모델은 Streamline Upwind / Petrov-Galerkin 유한요소법과 Boussinesq의 와점성이론을 기초로 하였는데, 수심적분을 취한 혼합거리 모형과 난류의 이방성과 국부평형의 조건을 적용하였다. 모형의 보정과 검증을 위해서 해석해와 관측자료를 활용하였다. 몇 가지 수치모의를 수행함으로써 난류모형의 민감도와 계산수행 능력을 확인할 수 있었다. 본 연구모형은 자연하천에서의 모형 적용성 확인을 위해서 한강유역에 적용하였고 모의치는 실측자료와 비교하였다. 개발된 모형은 자연하천에서의 관측자료와 비교적 잘 일치하는 것으로 나타났다. 결론적으로 본 연구의 2차원 유한요소모형은 개수로에서의 난류모의에 기초한 흐름분포에 있어 신뢰할만한 결과를 제공하는 것으로 나타났다.
최승용,김정아,홍찬기 보안공학연구지원센터 2009 보안공학연구논문지 Vol.6 No.2
최근 새로운 기술과 인터넷의 급속한 보급으로 인하여 현재 보유하고 있는 시스템이 웹 기반의 분산 환경으로 전이하면서 기존의 레거시 시스템 또는 이전의 클라이언트/서버 기술로 개발된 시스템을 새로운 환경에 최적한 시스템으로 재공학해야 할 필요성이 대두되고 있다. 본 논문에서는 재공학 프로젝트 수행의 첫 번째 단계인 계획 단계를 위한 절차와 기법을 제안한다. 계획 단계의 수행을 통해 레거시 시스템의 문제점을 정확하게 파악하고 개선할 목표를 수립하면서 실제 재공학을 통해 얻을 수 있는 비즈니스 가치를 고려해야 한다. 이를 위해서 군 관련 보유 현행 레거시 시스템 중 재공학의 대상을 식별하고 개선 전략 수립에 필요한 기법을 제안하였다.
2차원 수치모형을 이용한 수공구조물 설치에 따른 수리학적 흐름 영향 평가
최승용,남기영,한건연 한국환경영향평가학회 2011 환경영향평가 Vol.20 No.6
Frequently occurring flood and drought due to abnormal climate and global warming have increased the necessity of an effective water resources control and management of river flows. The various hydraulic structures are constructed in river as part of an effective water resources management. It is very important to analyse characteristics of flow according to installing hydraulic structures in this situations. The objective of this study is to investigate the hydraulic behaviors of flow considering affections of hydraulic structures using 2-D numerical model. To do this, both RMA-2 model and developed RAM2 model are used to analyse flow phenomena before and after installation of hydraulic structures in Nakdong river. As a result of, the water surface elevation at upstream regions increased about 22cm~66cm and the velocity around the structures sharply increased after installation of structures. The measures for the rise of water surface at upstream and local scour due to high velocity around the structures must be established when the structures is constructed.
최승용,손민영,( Shivshankar Chaudhari ) 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.1
The epoxy resin manufactured by reaction between the Epichlorohydrin and Bisphenol-A and excess of isopropanol (IPA) has been generally added as a solvent. At the final stage of reaction, ECH/IPA/Water mixture is remained in azeotropic form (50/30/20, w/w, %) along with final product. A recovery of high purity ECH/IPA from the obtained azeotropic mixture is necessary to reduce production coast but it is difficult by only distillation process. Therefore, pervaporation dehydration of ECH containing ternary feed mixture were studied using the acid treated HNT embedded PVA supported on alumina hollow fiber membrane. The acid treating of HNT surface was performed aim to generate the hydrophilic moieties on the HNT surface and FTIR and XPS analysis was used to confirmed the successful generation hydroxyl groups on HNT surface. FE-SEM analysis were performed for determining the consistency of membrane surface as well as thickness of active layer on the alumina hollow fiber.