http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
슬립폼 방식으로 제작된 역리브 프리캐스트 슬래브의 구조거동에 대한 실험적 연구
최석동,김민석,김강수,홍성엽,한선진 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 논문집 Vol.24 No.3
In the fabrication process of inverted multi-tee (IMT) slabs, concrete has to be poured twice due to its shape, which is a huge disadvantage as a precast member. To overcome this, a new technique for manufacturing IMT slabs using a slipform method has been recently developed. In this study, flexural and shear tests were carried out to investigate the structural performances of inverted multi-tee (IMT) slabs manufactured using slipform method. To this end, one flexural specimen and two shear specimens with topping concrete were fabricated, and their failure modes and crack patterns, and the slips that occurred between the precast slab and topping concrete were measured and analyzed in detail. In addition, the flexural and shear strengths of the specimens were evaluated by utilizing the structural design code, and a shear strength estimation method, which is suitable for composite IMT slabs with different concrete properties, was proposed for practical design. The IMT slab satisfied the nominal flexural strength calculated by the current design code, and the proposed method provided a good estimation of the shear strength of the specimens. 역리브 (Inverted multi-tee, 이하 IMT) 슬래브를 제작하기 위해서는 콘크리트를 2번에 걸쳐 타설해야하기 때문에 부재 제작에 상당한 시간이 소요된다는 단점이 있다. 이러한 단점을 극복하기 위하여 최근에는 슬립폼 방식을 활용하여 IMT 슬래브를 제작하는 기술이 새롭게 개발되었다. 이 연구에서는 슬립폼 방식으로 제작된 IMT 슬래브의 구조성능을 평가하기 위한 휨 및 전단 실험을 수행하였다. 이를 위하여 토핑콘크리트가 합성된 휨실험체 1개와 전단실험체 2개를 제작하였으며, 실험체들의 파괴모드 및 균열패턴, 프리캐스트 슬래브와 토핑콘크리트 사이의 슬립을 상세히 계측하고 분석하였다. 또한, 현행구조기준을 활용하여 실험체들의 휨 및 전단강도를 평가하였으며, 상이한 압축강도의 콘크리트로 구성된 합성 IMT 슬래브에 적합한 전단강도 산정방법을 제안하였다. IMT 슬래브의 휨강도는 현행구조기준에서 제시하는 공칭 휨강도를 상회하는 것으로 나타났으며, 제안 전단강도 산정방법은 실험체들의 전단강도를 우수한 정확도로 평가하는 것으로 나타났다.
Shaping Ability of Four Rotary Nickel-Titanium Instruments to Prepare Root Canal at Danger Zone
Choi, Seok-Dong,Jin, Myoung-Uk,Kim, Ki-Ok,Kim, Sung-Kyo 大韓齒科保存學會 2004 Restorative Dentistry & Endodontics Vol.29 No.5
The aim of this study was to evaluate the shaping abilities of four different rotary nickel-titanium instruments with anticurvature motion to prepare root canal at danger zone by measuring the change of dentin thickness in order to have techniques of safe preparation of canals with nickel-titanium files. Mesiobuccal and mesiolingual canals of forty mesial roots of extracted human lower molars were instrumented using the crown-down technique with ProFile, GT Rotary file, Quantec file and ProTaper. In each root, one canal was prepared with a straight up-and-down motion and the other canal was with an anticurvature motion. Canals were instrumented until apical foramens were up to size of 30 by one operator. The muffle system was used to evaluate the root canal preparation. After superimposing the pre- and post-instrumentation canal. change in root dentin thickness was measured at the inner and outer sides of the canal at 1, 3, and 5 mm levels from the furcation. Data were analyzed using two-way ANOVA. Root dentin thickness at danger zone was significantly thinner than that at safe zone at all levels (p < 0.05). There was no significant difference in the change of root dentin thickness between the straight up-and-down and the anticurvature motions at both danger and safe zones in all groups (p > 0.05). ProTaper removed significantly more dentin than other files especially at furcal 3 mm level of danger and safe zones (p < 0.05) Therefore, it was concluded that anticurvature motion with nickel-titanium rotary instruments does not seem to be effective in danger zone of lower molars. 하악 대구치 근심치근의 danger zone에서 수종의 전동 니켈-티타늄 파일의 근관성형력을 근관성형 전후 치질 두께의 변화를 측정하여 평가하고자 하였다. 기구에 따라 총 40개의 하악 대구치를 10개씩 Profile, GT Rotary file, Quantec 및 ProTaper 4개 군으로 나누고 각 치아당 2개의 근관을 straight up-and-down과 anticurvature 군으로 나누어 근단부 근관을 모두 30번 크기로 일정하게 확대하였다. 수정된 Bramante 법을 사용하였으며 술전 및 술후의 근관 상아질 두께를 치수저 하방 1, 3 및 5 mm 지점에서 측정, 이원변량분석법으로 통계분석하였다. 모든 군의 danger zone과 safe zone에서의 straight up-and-down 동작과 anticurvature 동작 사이에는 치근상아질 두께변화에 현저한 차이를 나타내지 않았다 (p > 0.05). ProTaper는 danger zone과 safe zone 모두에서 다른 기구에 비해 많은 량의 근관상아질 삭제를 보였으며 특히 분지부 3 mm 수준에서 현저하였다(p < 0.05).
기술초대석 - BIM Tool 소개 첫 번째 : Revit Structure
최일섭,최석동,김지현,Choe, Il-Seop,Choe, Seok-Dong,Kim, Ji-Hyeon 한국건축구조기술사회 2011 건축구조 Vol.18 No.6
Revit Structure(이하 Revit)는 Autodesk사에서 만든 BIM Tool이다. Revit에 관한 특징은 본 회지 7.8월호에 다루었다. Revit은 현재 국내에 가장 많이 보급되어 있고 관련 서적도 많은 BIM Tool로써 BIM작성, 물량산출, 도면작성 등을 수행할 수 있다. 지금까지 많은 프로젝트가 Revit으로 수행되었고 사용자도 많다. 그럼 7 8월호에 제시한 구조BIM 프로세스에 따른 간단한 설명과 Revit을 통한 BIM작성에 대해 소개하겠다. 자세한 내용은 추후에 BIM교육에서 다룰 예정이다.
기술초대석I - BIM Tool 소개 두번째 : Digital Project Part 2
최일섭,최석동,김지현,Choe, Il-Seop,Choe, Seok-Dong,Kim, Ji-Hyeon 한국건축구조기술사회 2012 건축구조 Vol.19 No.2
1, 2월호에서 Digital Project를 이용해서 한 개층의 BIM을 작성하는데 까지 알아보았다. 사실 단순히 따라하는 방식으로 Digital Project를 연재했지만 회지의 내용만으로도 제대로 모델링하기 힘들었을 것이다. DP에 대한 오프라인 교육을 기술사회 주관으로 다시 가질 예정이니 그 때 좀 더 자세한 내용을 제공받을 수 있을 것이다. 두 번째 내용은 Part1의 연장으로 층복사를 해서 층을 생성하고 완성 BIM 모멸을 활용하는 것에 대해 소개하겠다. 그전에 DP를 이용한 BIM 작성방법부터 알아보자.
기술초대석 - BIM Tool 소개 두번째 : Digital Project Part 1
최일섭,최석동,김지현,Choe, Il-Seop,Choe, Seok-Dong,Kim, Ji-Hyeon 한국건축구조기술사회 2012 건축구조 Vol.19 No.1
Digital Project(이하 DP)는 동대문 DDP, 여수엑스포, 한강예술섬등 비정형건축물의 BIM에 주로 활용되는 BIM Tool이다. 기계, 전기, 자동차분야에 널리 사용되는 Catia V5를 기반으로 건축분야에 맞게 건축, 구조, MEP 모듈을 탑재한 것이다. DP에 대한 자세한 소개는 본 회지 7 8월호를 참조하길 바란다. 현재 국내에는 DP가 많이 보급되지 않았고 배우기에도 Revit에 비해 상대적으로 까다롭기 때문에 유저층이 많지 않지만, 해외에서는 유저가 많으며 많은 Add-in이 만들어지고 있다. 이번호에서는 지난호에서 소개했던 Revit과 동일한 모델을 이용해 구조설계프로세스에 따라 구조BIM을 생성하고 활용하는 방법을 소개하도록 하겠다.