http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
채희권,최영환,김광수 한국경영과학회 2003 한국경영과학회 학술대회논문집 Vol.- No.1
제품개발과정에서 생성된 제품정보모델은 시간에 따라 계속 변하고 미확정적인 정보가 포함된 UDM(Under Defined Model)이다. 정보모델에서 관점(viewpoint)은 UDM을 표현하고 관리하는 중요한 요소이다. 토픽맵(Topic Map)을 이용한 정보모델은 관점의 표현이 용이하며, 관점에 따라 인간이 정보를 이해하고 조작하는 것을 돕는다. 그러나 토픽맵은 제품개발과정의 정보모델과 같은 UDM의 표현은 가능하나, 적합하지는 않다. 따라서 본 논문에서는 토 픽맵이 UDM에 적합하도록 토픽맵의 문법을 확장하였다. 그리고 UDM으로부터 전자상거래에 적용 가능한 FDM(Fully Defined Model)으로 변화하는 과정에 대하여 논하였다. 관점이 적용된 UDM으로는 제품 을 개발하는 과정 중에 생성되는 제품 모델을 적용하였으며, 대량생산이 된 이후의 제품 모델이나 제품개발단계에서 결정이 이루어진 후의 제품모델을 FDM 또는 UDM보다 모델의 의미가 보다 확정적인 확정적UDM을 사용하였다. 그리고 세탁기의 제품정보모델을 구현 예로 사용하여, UDM이 FDM 또는 확정적UDM으로 변화하는 과정을 설명 하였다.
고분자로 지지된 코발트(II) 테트라페닐포피린 화합물에서의 산소분자에 관한 연구
채희권,한종수,전학제,Chae Hee Kwon,Chong Soo Han,Hakze Chon 대한화학회 1984 대한화학회지 Vol.28 No.2
$-24^{\circ}C$ 그리고 $-78^{\circ}C$에서 코발트 화합물인 PVP-CoTPP 즉 poly(4-vinyl pyridine)-mesotetraphenylporphinatocobalt(II)의 가역적인 산소화반응에 대해서 살펴보았다. PVP-CoTPP를 $-78^{\circ}C$에서 산소와 접촉시키면 산소분압에 따라 흡착량이 증가하여 산소분압이 700mmHg에 이르면 흡착되는 산소의 양이 Co(II)와 $O_2$가 같은 몰비로 붙는 양과 거의 비슷해졌다. 반면에 -24, $0^{\circ}C$로 온도가 높아짐에 따라 산소의 흡착량은 점점 더 감소하였다. 한편 ERR분광기에 의해 $PVP-CoTPP-O_2$화합물을 살펴본 결가 Co(II)의 전자가 $O_2$쪽으로 이동하여 수퍼옥사이드 형태의 $Co(III)-O_2^-$를 이루고 있는 것 같다 The reversible oxygenation of a solid stae polymeric cobalt(II) porphyrin complex, PVP-CoTPP was studied at 0, -24 and $-78^{\circ}C$. When PVP-CoTPP was contacted with $O_2 $at$-78^{\circ}C$ the oxygen uptake increased with oxygen partial pressure. At about 700mmHg $O_2$, the amount of oxygen taken up corresponded approximately one oxygen molecule to one Co(II) complex. The amount of $O_2$ taken up by PVP-CoTPP decreased with increasing temperature. When $16O_2$ was admitted to the Co(II) complex a EPR signal corresponding to $O_2^-$ increased with a decrease in Co(II) signal. The results suggest that an electron is transfered from Co(II) in PVP-CoTPP to oxygen forming a $Co(III)-O_2^-$ complex where $O_2^- $is superoxide type.
김영준,이보화,채희권 한국외국어대학교 외국학종합연구센터 부설 기초과학연구소 1996 기초과학연구 Vol.5 No.-
고온초전도체 YBa₂Cu₃O6+x 단결정을 BuO와 CuO가 과다 첨가된 융제법(flux method)을 사용하여 Al₂O₃tray와 ZrO₂tray에서 제작하였다. 이들 각각의 단결정의 초전도 특성은 전기적 저항 측정 방법으로 측정하였다. Y : Ba:Cu의 혼합 조성비와 침투온도(Soaking temperature) 그리고 용기의 종류가 단결정의 성장에 대한 조건과 초전도 특성에 영향을 줌을 알 수 있었다. Single crystals of high Tc superconductor YBa₂Cu₃O6+x were prepared using flux method with an excess of BaO and CuO in both Al₂O₃and ZrO₂trays. The crystals were characterized by means of electrical resistivity measurements. The effects of mixture ratio of Y : Ba : Cu and soaking temperature and crucible material on the conditions for crystal growth, and on the superconducting properties of the crystals are discussed.
Dimethylformamide 용매에서 일어나는 mer-tris(2-pyrimidinethiothiolato) Coblat(Ⅲ)의 전기화학적 거동
채희권,공용복,김용태,천정균 한국외국어대학교 외국학종합연구센터 부설 기초과학연구소 1997 기초과학연구 Vol.6 No.-
dimethylformamide에 녹아있는 mer-tris(2-pyrimidinethiolato) cobalt(II)이, 백금전극에서 일어나는 전극반응에 대한 반응구조와 반응속도론적 인자들을 조사하였다. 비수용매용Ag/?? 전극에 대하여 약 1.0V 부근에서 비가역적인 2-전자산화반응이 관측되었다. 또한 약-0.9V에서 가역적인 1-전자 환원반응이 일어나 Co(II)-화학종이 생성되며, 이어서 비가역적으로 리간드 분자 한 개가 떨어지는 분해반응이 일어났다. 환원 반응에 의하여 생성된 Co(II)-화학종은 사용한 지지전해질의 음이온에 따라 Trans-형, 또는 cis-형의 이성질체가 관측되었다. Electrochemical behavior of mer-tris(2-pyrimidinethiolato) cobalt( III ) in dimethylformamide was studied on a platinum electrode by means of cyclic voltammetry, chronoamperometry, and chronocoulometry. It was found that the neutral complex molecule was electroactive between the potential region of 1.0 and 12 V vs. a nonaqueous Ag/Ag+ electrode. The Co(Ill) complex was reversibly reduced to Co(II) species by one-electron transfer at about -0.9 V, followed by an irreversible dissociation reaction. However, the oxidation process at around 1.0 V, involved an irreversible two-electron transfer in a ligand site. )
도메인 기반 모델링과 구조 유니트를 이용한 기업 구조 프레임워크의 설계방법
채희권(Heekwon Chae),김광수(Kwangsoo Kim),김철한(Cheolhan Kim),최영환(Younghwan Choi) 한국전자거래학회 2005 한국전자거래학회지 Vol.10 No.2
엔터프라이스아키텍처 (EA) 프레임워크는 기업의 정보기술 요소들 사이의 상호 운영성을 증가시키기위해 활용되는 EA를 구축하기 위한 도구이다. 본 논문은 엔터프라이스 아키텍처 유닛(AU). 참조모델, 그리고 도메인 모델 사이의 연관관계를 조합하여 정의한 ENAF (ENterprise Architecture Framework)이라는 엔터프라이스 아키텍처 프레임워크의 설계 기법을 정의한 것이다. 이 기법에서 정의하는 AU는 하나의 비즈니스 프로세스와 이를 지원하는 시스템 및 기술요소들을 연관관계를 포함하여 조합한 최소단위의 EA로서, 서로 연관이 있는 AU틀의 조합을 통하여 EA의 구축이 가능하도록 하였다. UML과 같이 범용성있는 모델링 언어의 사용은 비즈니스 도메인을 표현하는데 한계가 있으므로 비즈니스 도메인의 기술에 적합한 DSM의 개념을 도입하였으며, DSM으로 정의된 AU 들은 토픽 맵을 이용하여 EA를 생성할 수 있다. 논문의 2장은 EA 관련 연구 및 DSM, 토픽 맵에 대하여 기술하였으며, 3장은 본 연구에서 제안하는 EA 프레임워크의 설계 방법에 대하여 성명하였으며, 4장에서는 본 설계 기법을 적용한 사례에 대하여 설명하였다. An Enterprise Architecture (EA) Framework is a tool which supports implementation of the Enterprise architecture that is used to enhance the interoperability of the IT components. In this paper, we propose a framework named as ENAF (ENterprise Architecture Framework) which combines enterprise architecture unit (AU), reference model, and association relationship between domain model. Architecture Unit is defined as a minimum set of a business process and its associated components such as application system and technical components. An EA can be designed and implemented by the aggregating the related AUs including association relationship between Architecture Units. Because UML model has limitations to describe business domain semantics because it is designed for general purpose, we adapt the DSM (Domain Specific Modeling) concept. We describe association relationship between Architecture Units designed by Domain Specific Modeling through Topic Map. Session 2 describes related works about Enterprise Architecture frameworks, Domain Specific Modeling, and Topic Map, while Session 3 explains components of the ENAF. Finally Session 4 shows the case study for implementation of the new Framework called ENAF.