http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고밀도 폐유리를 잔골재로 사용한 RC 부재의 휨거동에 관한 해석적 연구
차경문,최소영,김일순,양은익 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 논문집 Vol.24 No.1
고밀도 폐유리가 콘크리트를 포함하는 건설 재료로 사용 가능함이 밝혀짐에 따라 본 연구에서는 고밀도 폐유리를 잔골재로 적용한 RC 부재의 구조적 거동을 평가하고자 휨거동 실험을 수행하고 그 결과를 비선형 유한요소해석 결과와 비교 검토하였다. 그 결과, 고밀도 폐유 리를 잔골재로 사용하게 되면, 균열 개수가 감소하고 균열 간격 및 압괴 면적이 증가하였다. 또한, 고밀도 폐유리를 잔골재로 대체한 부재는 높은 처짐 단계에서 연성이 감소되었다. 이러한 이유로 천연골재를 사용한 부재와 동일한 방법의 해석 기법은 고밀도 폐유리를 잔골재로 대체한 부재의 휨거동에 대한 초기강성, 항복하중 및 최대하중을 제대로 예측하지 못하는 것으로 나타났으나, 압괴 진전에 따른 중립축 깊이가 감소하는 것을 해석적으로 구현하게 되면, 비선형 유한요소 해석 결과가 실험결과를 비교적 잘 예측하는 것으로 나타났다. It were found that the heavyweight waste glass can be used as a construction materials including concrete from previous experimental studies. In this study, in order to evaluate the structural behavior of RC members using heavyweight waste glass as fine aggregate, a flexural behavior test was performed. And then, its results were compared with those obtained from non-linear finite element model analysis. From the results, when the heavyweight waste glass as fine aggregate in RC member, the area of compressive crushing and the number of cracks increased, however, the mean of cracking spacing decreased. Also it had reduced the ductility at high loading stage. For this reason, the same analysis method about the RC member using natural sand as fine aggregate did not predict the initial stiffness, yield load and maximum load on the flexural behavior of the RC members using heavyweight waste glass as fine aggregate. On the other hand, when it is analytically implemented the reduction of neutral axis depth due to developed compression crushing, the results of non-linear finite element analysis could be predicted the experimental results, relatively well.
고밀도 폐유리를 잔골재로 사용한 RC 부재의 해석방법에 관한 연구
최소영 ( Choi So Yeong ),차경문 ( Cha Kyoung Moon ),김일순 ( Kim Il Sun ),양은익 ( Yang Eun Ik ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
고밀도 폐유리가 콘크리트의 잔골재로 활용되기 위한 다양한 연구들이 수행되고 있다. 따라서 본 연구에서는 고밀도 폐유리를 잔골재로 적용한 RC 부재의 휨거동을 해석적으로 구현하고자 하였다. 그 결과, 고밀도 폐유리를 잔골재로 사용할 경우, 높은 처짐단계에서 발생하는 연성저하는 일반적인 해석기법으로는 예측하기 어려운 것으로 나타났다. 그러므로 고밀도 폐유리를 잔골재로 활용한 RC부재의 휨거동을 효과적으로 예측하기 위해서는 하중 증가에 따른 중립축 깊이의 감소를 반영해야 비선형 유한요소 해석 결과가 실험결과를 비교적 잘 반영하는 것으로 나타났다.
고밀도 폐유리를 잔골재로 사용한 콘크리트 부재의 휨거동에 대한 해석적 연구
이경종 ( Lee Gyung Jong ),차경문 ( Cha Kyung Moon ),최소영 ( Choi So Yeong ),진상호 ( Jin Sang Ho ),양은익 ( Yang Eun Ik ) 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.21 No.1
In this paper, the flexural behavior of RC member recycled heavy weight waste glass as fine aggregate was evaluated by finite element analysis. From the results, yield point and maximum load decreased with decreasing concrete strength and elastic modulus. Also, the finite element analysis program does not reflect the ductility loss of RC members using heavy weight waste glass as fine aggregate.