http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
진동현,이경상,서민지,최성원,성노훈,이은경,한현경,한경수 대한원격탐사학회 2018 大韓遠隔探査學會誌 Vol.34 No.6
적설은 강수의 한 형태로 지표면에 쌓인 눈으로 정의되며 빙권의 가장 큰 단일 구성 요소로서 지구 표면과 대기 사이의 열 교환이나 전 지구 또는 지역적인 측면에서 지구의 에너지 수지 균형을 유지하는 중요한 역할을 하는 등 지구 표면 온도를 조절하는데 영향을 미친다. 그러나 적설은 인간의 접근이 어려운 지역에 주로 분포하기 때문에 위성을 활용한 적설 탐지가 활발히 수행되고 있으며 산림 지역의 적설 탐지는 구름과 적설의 구분 다음으로 중요한 과정이다. 따라서 본 연구는 기존 극 궤도 위성에서 산림 지역 적설 탐지에 활용하는 Normalized Difference Snow Index(NDSI) 및 Normalized Difference Vegetation Index(NDVI)를 정지궤도 위성에 적용하였으며, 산림 지역 외 영역은 적설의 분광 특징을 활용한 R1.61μm anomaly 기법 및 NDSI를 활용하여 적설 탐지를 수행하였다. 본 연구에서 산출한 Snow Cover 자료와 Visible Infrared Imaging Radiometer(VIIRS) Snow Cover 자료를 활용해 간접 검증을 수행한 결과, Probability of Detection(POD)는 99.95%, False Alarm Ratio(FAR) 는 16.63 %로 나타났다. Himawari-8 Advanced Himawari Imager(AHI) RGB 영상을 추가로 활용해 정성적 검증 또한 수행하였으며 수행 결과, VIIRS Snow Cover가 미탐지한 영역과 본 연구가 오탐지한 영역이 혼합되어 나타났다. Snow Cover is a form of precipitation that is defined by snow on the surface and is the single largest component of the cryosphere that plays an important role in maintaining the energy balance between the earth’s surface and the atmosphere. It affects the regulation of the Earth’s surface temperature. However, since snow cover is mainly distributed in area where human access is difficult, snow cover detection using satellites is actively performed, and snow cover detection in forest area is an important process as well as distinguishing between cloud and snow. In this study, we applied the Normalized Difference Snow Index (NDSI) and the Normalized Difference Vegetation Index (NDVI) to the geostationary satellites for the snow detection of forest area in existing polar orbit satellites. On the rest of the forest area, the snow cover detection using R1.61μm anomaly technique and NDSI was performed. As a result of the indirect validation using the snow cover data and the Visible Infrared Imaging Radiometer (VIIRS) snow cover data, the probability of detection (POD) was 99.95 % and the False Alarm Ratio (FAR) was 16.63 %. We also performed qualitative validation using the Himawari-8 Advanced Himawari Imager (AHI) RGB image. The result showed that the areas detected by the VIIRS Snow Cover miss pixel are mixed with the area detected by the research false pixel.
11 µm 휘도온도와 11-12 µm 휘도온도차의 상관성 분석을 활용한 해빙탐지 동적임계치 결정
진동현,이경상,최성원,서민지,이다래,권채영,김홍희,이은경,한경수,Jin, Donghyun,Lee, Kyeong-Sang,Choi, Sungwon,Seo, Minji,Lee, Darae,Kwon, Chaeyoung,Kim, Honghee,Lee, Eunkyung,Han, Kyung-Soo 대한원격탐사학회 2017 大韓遠隔探査學會誌 Vol.33 No.2
지구 기후시스템의 중요구성인자인 해빙은 극지방과 고위도에 분포하는 특성상 위성을 통한 탐지가 활발히 수행되고 있다. 위성자료를 이용한 해빙탐지기법은 반사도와 휘도온도자료를 이용하며, 많은 연구에서 휘도온도자료를 통해 산출된 Ice Surface Temperature (IST)를 활용한 기법인 Moderate-Resolution Imaging Spectroradiometer (MODIS)의 해빙탐지기법을 활용하고 있다. 본 연구에서는 IST 산출과정이 생략된 단순하고 효율적인 동적임계값 기법을 활용한 해빙탐지기법을 제시하고자 한다. 동적임계값을 지정하기 위하여 해수의 어는점 이하의 화소를 대상으로 MODIS IST와 MODIS $11{\mu}m$ 채널의 휘도온도, Brightness Temperature Difference ($BTD:T_{11{\mu}m}-T_{12{\mu}m}$)의 상호관계를 분석하였다. 분석 결과, 세수치의 관계가 선형의 특징을 나타내었으며 이를 활용하여 임계값을 지정하였다. 청천역에서 지정한 임계값을 MODIS $11{\mu}m$ 채널에 적용하여 해빙을 탐지하였다. 또한, 본 연구의 해빙탐지기법의 성능을 검증하기 위해 MODIS Sea ice extent를 이용하여 정확도를 분석하였으며 그 결과, Producer Accuracy (PA) 99% 이상의 높은 정확도를 보였다. Sea ice which is an important component of the global climate system is being actively detected by satellite because it have been distributed to polar and high-latitude region. and the sea ice detection method using satellite uses reflectance and temperature data. the sea ice detection method of Moderate-Resolution Imaging Spectroradiometer (MODIS), which is a technique utilizing Ice Surface Temperature (IST) have been utilized by many studies. In this study, we propose a simple and effective method of sea ice detection using the dynamic threshold technique with no IST calculation process. In order to specify the dynamic threshold, pixels with freezing point of MODIS IST of 273.0 K or less were extracted. For the extracted pixels, we analyzed the relationship between MODIS IST, MODIS $11{\mu}m$ channel brightness temperature($T_{11{\mu}m}$) and Brightness Temperature Difference ($BTD:T_{11{\mu}m}-T_{12{\mu}m}$). As a result of the analysis, the relationship between the three values showed a linear characteristic and the threshold value was designated by using this. In the case ofsea ice detection, if $T_{11{\mu}m}$ is below the specified threshold value, it is detected as sea ice on clear sky. And in order to estimate the performance of the proposed sea ice detection method, the accuracy was analyzed using MODIS Sea ice extent and then validation accuracy was higher than 99% in Producer Accuracy (PA).
자기 디버링을 이용한 복합 미세패턴의 형상 정밀도 향상
진동현(Dong-Hyun Jin),곽재섭(Jae-Seob Kwak) 대한기계학회 2016 大韓機械學會論文集A Vol.40 No.11
최근, 산업에서는 미세패턴의 효과가 입증됨에 따라 미세패턴에 대한 연구가 활발히 진행되고 있다. 그러나, 이러한 연구들은 단일 패턴에 집중되어있으며, 복합 미세패턴의 제작 및 디버링에 관한 연구는 부족한 실정이다. 따라서, 본 연구에서는 원통형 공작물에 복합 미세패턴을 제작하고, 자기 디버링을 이용하여 디버링을 실시하였다. 또한, 반응표면법을 이용하여 패턴의 높이에 대한 예측모델을 도출하고, 자기 디버링 공정을 최적화하였다. 그 결과, 패턴의 높이에 대한 예측값과 실험값을 비교하였을 때, 평균적으로 7%의 오차가 발생하는 것을 확인하였다. 또한, 검증실험을 통하여 형상 정밀도가 우수한 복합 미세패턴의 제작이 가능하고, 예측모델이 신뢰성이 있음을 알 수 있었다. In recent times, the requirement of a micro pattern on the surface of products has been increasing, and high precision in the fabrication of the pattern is required. Hence, in this study, dual micro patterns were fabricated on a cylindrical workpiece, and deburring was performed by magnetic abrasive deburring (MAD) process. A prediction model was developed, and the MAD process was optimized using the response surface method. When the predicted values were compared with the experimental results, the average prediction error was found to be approximately 7%. Experimental verification shows fabrication of high accuracy dual micro pattern and reliability of prediction model.
진동현(Dong-Hyun Jin),이성호(Sung-Ho Lee),유만희(Man-Hee You),하경호(Kyung-Ho Ha),김태완(Tae-Wan Kim),곽재섭(Jae-Seob Kwak) 대한기계학회 2015 대한기계학회 춘추학술대회 Vol.2015 No.11
In recent industry, the requirement of micro pattern on the surface of products has been increasing, and at the same time high precision of the pattern is necessarily needed. Hence in this study the dual micro patterns on a cylindrical workpiece were fabricated and its deburring was carried out with magnetic abrasive polishing. Subsequently the most effective factor, magnetic flux density, was examined by the design of experiment.
마이크로 머시닝에서 공구 정렬과 가공정밀도에 관한 연구
진동현(Dong-Hyun Jin),안주은(Ju-Eun An),김주권(Joo-Kwon Kim),이성호(Sung-Ho Lee),손출배(Chul-Bae Son),곽재섭(Jae-Seob Kwak) 대한기계학회 2015 대한기계학회 춘추학술대회 Vol.2015 No.11
Micro end mill is one of the precise tools, which is used in machining of ultra-precision products such as micro channel, micro patterned mold, and so forth. To satisfy the required precision of these products, many studies were investigated on the cutting force, burr formation, and burr generation mechanism of micro end mill, but there are little studies on the alignment of micro tool even which is the foundation of machining. Hence in this investigation, a simulation on manufacturing of channel with misaligned micro end mill was carried out and its effect was evaluated.