http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주지원,양은미,손영준,김미정,송은송,변형석,최영륜 대한신생아학회 2008 Neonatal medicine Vol.15 No.2
Purpose : This study was performed to determine the rate of neonatal symptomatic spontaneous pneumothorax, and the corresponding clinical characteristics, co-morbidities, and outcomes. Methods : The demographic characteristics, clinical symptoms and signs, associated abnormalities, methods of treatment, and outcomes were investigated in 22 neonates with symptomatic spontaneous pneumothorax in the neonatal intensive care unit (NICU) of Chonnam University Hospital between March 2003 and February 2008. Results : The rate of spontaneous pneumothorax was 0.55%. Among the 22 neonates, the number of outborns was 15 (68.2%) and the number of males was 12 (54.5%). The main symptoms and signs were chest retraction, tachypnea, and cyanosis. The pneumothoraces were more frequent on the right side (59.1%) and all cases were diagnosed within 3 days of life. Four cases (18.2%) had urologic abnormalities and 7 cases (31.8%) had cranial abnormalities by ultrasonography. The treatments included oxygen (81.8%) and oxygen with chest tube drainage (18.2%). All of the infants survived and the overall outcomes were favorable. Conclusion : When respiratory symptoms and signs are develop abruptly in otherwise healthy newborns, the clinician should suspect a spontaneous pneumothorax and check a chest x-ray as soon as possible. Although the outcome of neonatal symptomatic spontaneous pneumothorax is favorable, renal and cranial ultrasonography are needed because of the higher possibility of urologic abnormalities and germinal matrix/intraventricular hemorrhage than in newborns without a pneumothorax.
실시간 단일 패스 가시성 선별 기법 기반의 3차원 그래픽스 가속기 구조
주지원,최문희,김신덕,Choo, Catherine,Choi, Moon-Hee,Kim, Shin-Dug 한국정보처리학회 2008 정보처리학회논문지 A Vol.15 No.1
차폐 선별 기법은 가시성 선별 기법 중 하나로, 다른 물체에 가려서 보이지 않는 물체나 삼각형에 대한 연산을 제외시키는 기법이다. 이는 불필요한 연산량을 효과적으로 줄이기 ??문에 복잡한 장면을 실시간으로 처리하기 위해 필수적이다. 하지만 기존의 차폐 선별 기법인 차폐 쿼리는 가시성 검사를 위해 물체 데이터를 하드웨어에 두 번 보내야 하며, 이로 인해 불필요한 연산이 발생한다. 또 다른 기존 하드웨어 차폐 선별 기법인 VCBP는 빠른 수행을 하지만 바운딩 볼륨의 검사를 지원하지 않으며 응용으로 그 결과를 보내는 기능이 없다. 본 논문에서는 이러한 문제점들을 해결한 가시성 선별과 렌더링을 한 번에 처리할 수 있는 단일 패스 알고리즘을 제안한다. 제안하는 기법은 일차적으로 3차원 가속 하드웨어의 초기 단계인 삼각형을 픽셀로 나누는 래스터화 단계에서 캐쉬를 이용하여 빠르게 가시성 선별을 수행한다. 그와 동시에 가시성 선별 과정에서는 각 프리미티브의 가시성 정보를 응용단계로 보낸다. 응용단계에서는 하드웨어로부터 받은 이전 프레임의 가시성 정보와 공간계층 트리 구조를 이용하여 하드웨어로 보내는 보이지 않는 프리미티브를 위한 데이터량을 획기적으로 줄인다. 제안하는 구조는 하드웨어 차폐 선별 쿼리를 이용하는 기존 이중 패스 알고리즘 중 S&W 대비 최대 44%, 최저 14%의 성능이 향상되었고, CHC 대비 최대 25%, 최저 17%의 성능이 향상되었다. An occlusion culling method, one of visibility culling methods, excludes invisible objects or triangles which are covered by other objects. As it reduces computation quantity, occlusion culling is an effective method to handle complex scenes in real-time. But an existing common occlusion culling method, such as hardware occlusion query method, sends objects' data twice to GPU and this causes processing overheads once for occlusion culling test and the other is for rendering. And another existing hardware occlusion culling method, VCBP, can test objects' visibility quickly, but it neither test bounding volume nor return test result to application stage. In this paper, we propose a single pass occlusion culling method which uses temporal and spatial coherency, with effective occlusion culling hardware architecture. In our approach, the hardware performs occlusion culling test rapidly with cache on the rasterization stage where triangles are transformed into fragments. At the same time, hardware sends each primitive's visibility information to application stage. As a result, the application stage reduces data transmission quantity by excluding covered objects using the visibility information on previous frame and hierarchical spatial tree. Our proposed method improved maximum 44%, minimum 14% compared with S&W method based on hardware occlusion query. And the performance is increased 25% and 17% respectively, compared to maximum and minimum performance of CHC method which is based on occlusion culling method.
주지호,최광문,이찬미,계인석,장기석,문석환,윤호경,엄용성,최광성 대한용접·접합학회 2021 대한용접학회 특별강연 및 학술발표대회 개요집 Vol.2021 No.11
다양한 장점을 가지고 있는 마이크로/미니 LED 디스플레이는, 많은 수의 미세 LED로 구성된다. 그러나 현재 개발중인 전사방법 및 접합 방법은 생산성, 리웍, 높은 접촉 저항에 의한 발열 및 신뢰성 등 해결해야 할 문제가 몇 가지있다. ETRI는 지난 16년간 개발한 폴리머 베이스 솔더용 접합 소재를 기반으로, 많은 수의 마이크로/미니 LED를 동시에 전사 및 접합할 수 있는 다기능 접합 소재와 공정기술을 개발하였다. 개발된 접합 소재는 솔더의 산화막을 제거하는 환원기능을 가지고 있지만 공정 중 흄이 발생하지 않는다. 특히 환원제는 베이스 매트릭스인 폴리머의 경화제 역할을 하기 때문에 경화 후 잔류하지 않아 별도의 세척 공정이 필요 없다. 또한 베이스 매트릭스인 폴리머는 경화 후 언더필 역할을 하기 때문에 별도의 언더필 공정 또한 필요 없다. 동시 전사·접합 (Simultaneous transfer and bonding, SITRAB) 공정은 레이저 압착 본딩 (Laser-assisted Bonding with Compression, LABC) 기술과 앞에서 서술한 다기능 접합소재를 기반으로 개발되었다. 동시 전사·접합 공정은 기존의 전사 후 접합 공정과 달리 전사 공정과 접합 공정을 하나의 공정으로 통합하여, 짧은 시간 내에 전사 및 접합공정이 완료될 수 있으며, 공정 중 발생하는 불량율을 감소시키고 생산성을 높일 수 있다. 본 발표에서는 상기 다기능 접합 소재 및 동시 전사·접합 기술을 이용하여 전사·접합 완료된 미니LED 어레이의 접합 실험 결과를 소개한다. 이 실험에서 SnAg 솔더를 적용한 35*35 LED 어레이, In 솔더를 적용한 35*35 LED 어레이 및 이방성 동시 전사·접합 소재를 이용한 20*20 LED 어레이가 100 % 수율로 접합되었다. 뿐만 아니라 타일링 공정을 이용한 대면적 확장성 및 리웍 공정 등이 실험적으로 확인되었다.