http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐쇄형 데크플레이트를 사용한 합성슬래브의 전단부착 특성에 관한 연구
주기수,박성무,Ju, Gi Su,Park, Sung Moo 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.5
데크플레이트를 사용한 합성슬래브가 합성거동을 발휘하기 위해서는 데크플레이트와 콘크리트의 부착강도가 확보되어야한다. 합성슬래브에서 전단부착강도는 콘크리트와 데크플레이트의 화학적 부착력, 마찰저항 기계적 상호작용에 의해 발생한다. 또 기계적 상호작용은 길이 방향 전단력 전달 장치인 엠보싱 및 쉬어코넥터, 데크플레이트 형상 등에 의해서 확보되어 진다. 그리고 기계적 상호작용의 효과는 상호 접착부의 수직박리를 구속할 수 있는 데크의 형상과 쉬어코넥터 설치에 따른 단부정착 여부에 따라 크게 달라진다. 그러므로, 본 연구에서는 폐쇄형 데크플레이트에 대하여 기계적 전달장치인 엠보싱과 쉬어 코넥터로 사용되는 스터드 볼트에 대한 전단 보강장치의 부착효과를 Push-off 실험을 통하여 규명하였으며 이들 인자들에 대하여 제안식을 제시하였다. 이는 합성슬래브 설계방법의 기초자료로 이용될 수 있을 것으로 사료된다. Composite slab with deckplate needs sufficient bond strength between deckplate and concrete to conduct composite behavior Composite slab can transfer the shear by either chemical adhesion interface interlock, or active friction. There are several way of mechanical shear connection in composite slab. that is embossments shear connector shape of deckplate etc. Effect of mechanical interaction is deped on shape of deckplate which is to prevent peeling between deckplate and concrete and an amount of shear connector. The behavior and strength of the connection between the decking and the concrete slab due to embossments and end anchorage may be estimated using the push-off tests described in this paper We proposed the equation of shear bond strength in the composite slab It will be use to design by basic data in composite slab.
Flat-Hat 스티프너를 가진 데크플레이트의 단면 성능에 관한 연구
주기수,박성무 한국공간구조학회 2004 한국공간구조학회지 Vol.4 No.1
시공시 콘크리트의 하중은 받는 데크플레이트의 지지능력은 압축부분 플랜지에서 좌굴에 의해서 결정되어 진다. 얇은 철판 데크플레이트의 압축플랜지에서 중간스티프너의 크기와 위치는 플랜지의 좌굴모드에 강한 영향을 발휘한다. 높은 강도 철판으로 구성된 시험체 단면은 다양한 좌굴모드를 유도하기 위하여 작은 것에서 큰 스티프너에 걸쳐 압축플랜지에 만들어 졌다. ABAQUS 프로그램 해석은 좌굴모드를 지배하는 중간스티프너의 효과를 결정하기 위하여 수행되었다. 각 실험체 시리즈는 단순보로 순수휨이 적용되었다. 실험결과 소성파괴 메카니즘을 통하여 극한파괴에 앞서 다양한 좌굴형상이 나타났다. 실험으로 결정되어진 좌굴응력은 ABAQUS해석으로 얻어진 해석결과와 각국의 규준값들과 비교하기 위하여 사용되었다. It is the buckling of the compression portions of the deckplate that govern its behaviour under wet concrete construction loading. The size and position of intermediate stiffeners in the compression flanges of thin-plate steel decks exert a strong influence on the dominant buckling mode of the flange. Test sections composed of high-strength steel were brake pressed with a variety of Flat-hat intermediate stiffeners in the compression flange forming a progression from small to large stiffeners. The ABAQUS program to determine the effectiveness of intermediate stiffeners in controlling buckling modes is undertaken. A series of specimens are loaded with simple beam. Various buckling wave forms prior to ultimate failure through a plastic collapse mechanism. The experimentally determined buckling stresses are found to be comparable with studies performed using the ABAQUS program analysis and using each country code.
데크플레이트 단면형상에 따른 합성슬래브의 합성능력에 관한 연구
주기수,박성무,Ju, Gi-Su,Park, Sung-Moo 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.6
이 논문은 합성슬래브의 구조적 거동에 관한 것으로, 개방형 형상인 사다리꼴 데크플레이트와 폐쇄형인 역삼각형 상단플랜지 데크플레이트를 사용한 합성슬래브의 실험에 의한 것이다. 그 결과 합성슬래브의 합성거동을 위해서는 데크플레이트의 형상적인 요소가 매우 중요한 변수로 나타났다. 즉 폐쇄형 형상인 역삼각형 데크플레이트가 사다리꼴 형상보다 전단슬립과 처짐에 더 효과적으로 나타났다. 그러므로 합성데크슬래브 용도로 사용되는 데크플레이트의 개발과 사용에 있어 형상적인 요소가 매우 중요하게 취급되어야 하며, 이에 대한 이론적인 평가도 이루어 졌다. This paper provides the results of the study on the structural behavior of the composite metal deck slab system. The experimental study on composite slabs with trapezoidal and inverse-triangle-top-flange deckplate result, it was found that the geometry of the cross-section was more important than any other factors to ensure the composite action of deck slabs. Hence the inverse-triangle-top-flange of closed box was more effective on the shear slip and deflection than the trapezoidal deck of open shape. These results show that the continuing development of composite deck plate must consider importantly the geometry of the deck. The experimental results were compared with established formulas and were analysed to advance a theory on composite slabs using deckplates.
鐵骨보와 輕量콘크리트 슬라브로 구성된 合成보에서 쉬어 코넥터의 强度에 關한 硏究
朴性武,朱基秀 嶺南大學校 工業技術硏究所 1995 工業技術硏究所論文集 Vol.23 No.2
From the previous experimental test results, it has shown that shear strength in lightweight concrete beams was about 85% on that in normal concrete beams. It is speculated that shear connectors in composite beams of steel and lightweight concrete associated with the longitudinal shear strength decrease more in strength than those in normal concrete. So this paper, as a study on strength of shear connectors in composite beams of steel and lightweight concrete slabs, has a purpose to compare the strength formula resulted from the push-out test of thirteen solid slab and four Deck Plate slab with the established ones, and then the suggest a proper strength formula of the shear connectors. The established strength formula of the shear connectors is prescribed for ?? by AISC code. but from the experinental test results the strength values of the shear connectors in lightweight concrete slabs shows 70% on those of the shear connectors in normal concrete slabs by AISC code. Therefore, as a strength formula this paper suggests to multiply the established strength formula by reduction factor(Ф=0.7)