http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LTE 이동 단말의 MIMO 무선 성능과 Hand effect
조용상(Y.S Cho),김영렬(Y.R Kim),노승표(S.P Noh),심혜정(H.J. Shim),김인경(I.K. Kim) 大韓電子工學會 2012 電子工學會論文誌-TC (Telecommunications) Vol.49 No.5
최근 국내외 주요 이동통신 사업자들이 본격적으로 4G 무선표준 방식인 LTE (Long Term Evolution) 서비스를 시작 하면서 LTE 방식을 지원하는 이동단말의 MIMO (Multi Input-Multi Output) OTA (Over The Air) 성능 평가 방법의 필요성이 중요해 지고 있다. 본 논문에서는 3GPP (3rd Generation Partnership Project)에서 논의되고 있는 MIMO OTA 시스템에서의 LTE 이동 단말기의 핸드 효과에 의한 안테나의 특성변화를 이론 및 실험적으로 검증하였다. 핸드 효과에 의한 LTE 이동 단말기의 성능은 MIMO OTA 시스템에서의 LTE PDSCH throughput 비교를 통해 link level에서 확인하였다. Since the major cellular data service providers in U.S, Japan as well as in Korea started the LTE (Long Term Evolution) service, there has been more strong need for the methods that can accurately measure the MIMO (Multi Input-Multi Output) OTA (Over The Air) performance of LTE handsets because the performance of the MIMO antenna determines the data throughput in the downlink. In this paper, the hand effect on the MIMO antenna performance is analyzed by numerically and experimentally. The hand effect on the LTE mobile handset is analyzed by measuring the link level performance in the MIMO OTA system.
Revit Architecture를 이용한 2D 설계도면 구현 가능성에 관한 연구
조용상(Cho, Yong-Sang),이희원(Lee, Hee-Won) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.10
최근 국내 건축시장에서는 건설프로젝트 생애주기 전반에 걸쳐 생산되는 정보를 3D 모델 기반으로 관리하 는 BIM에 대한 관심이 높아지고 있다. 국가적으로도 그에 따른 정책, 기술개발의 진행과 함께, BIM을 이용한 설계기 준이 제도화 되고 있다. 그러나 BIM 소프트웨어(Revit Architecture)를 이용한 2D 설계도면 작성과 관련해서는 기존의 CAD와 같은 수준의 실시설계도면 작성이 어려운 것으로 인식되고 있다. 기존 연구에 따르면, BIM 소프트웨어가 가 지고 있는 문제점으로는 시공수준의 접합상세가 나오지 않는다는 문제점과 효과적으로 상세를 더할 수 있는 모델링 기능이 부족하다는 문제점이 지적되고 있다. 이에 본 연구에서는 BIM 소프트웨어를 사용하여 현재 납품되고 있는 2D 실시설계도면 수준의 도면작성과 출력가능 여부를 검증하고자 한다. 이를 위해 설계기본요소를 분석하고, 단면상 세도를 사례로 BIM 소프트웨어에 제공되는 기능을 사용해 기존 CAD로 작성한 실시설계도면과 동일한 수준의 도면 작성과 출력이 가능함을 검증하였다. BIM(Building Information Modeling) enables 3D model-base management for all information produced by construction project during its life cycle. Also as a national policy, BIM has been institutionalized as design criteria. But, on the matter of 2D drawing using BIM software (Revit Architecture), it has been recognized as difficult to realize the same quality drawing drawn by CAD. The purpose of this study is verifying the possibility of printable design drawing implemented by BIM software at the same quality of 2D shop drawing drawn by 2D CAD. Through the analysis of basic design elements of 3D BIM software and 2D CAD software, with the case of partial cross sectional drawing which is most faithful representation of the basic design elements, this study find out that the 3D BIM software can produce the same quality 2D printable drawing utilizing its implicit function.
압출방식으로 제작된 PCL/NaCl 와이어를 이용하여 제작된 이중기공 세포지지체 제작
조용상(Yong Sang Cho),송기명(Gi Myoung Song),안상현(Shang Hyun An),이세환(Se Hwan Lee),조영삼(Young-Sam Cho) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
Firstly, we prepared PCL/NaCl mixture with 20wt% NaCl constituents. After that, we fabricated PCL/NaCl wire with 400 and 600 micrometer using extrusion technique. Firstly, one layer was composed with (PCL wire/metal wire) repeatedly. The second layer was composed by same process but 90 degree rotated. This layer stacking process was executed repetitively when the height is reached at the designed height. After that, PCL wires became a porous scaffold under the environmental temperature over 60 degrees Celcius. Subsequently, metal wires were removed from the resultant. We soak this scaffold into D. I. water to leach out salt. Finally, we could get bi-pore scaffolds.