http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조남경(NamKyung Cho),이광진(KwangJin Lee),김진선(JinSun Kim),한영민(YeongMin Han) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
수직형 추진기관시험설비는 실제 발사시와 유사한 형태를 가지며 발사시의 여러 현상을 확인해 볼 수 있으므로 널리 활용된다. 기반시설 측면에서 첫 번째 고려사항은 엔진으로부터의 분출되는 화염이 발사체에 영향을 주지 않도록 수직방향의 단차가 필요하다는 것이다. 두 번째 고려사항은 안전을 위하여 산화제와 연료가 분리되고, 엔진이 장착된 스탠드가 산화제와 연료로부터 분리되어야 한다는 것이다. 또한 테스트 스탠드와 연결된 건물을 설계하는데 있어 힘의 흐름을 고려해야 하며, 엔진에서 발생한 추력이 엔진어댑터, TMS, interface frame, 주구조물, 건물로 전달됨에 있어 건물의 진동은 공급계나 제어계측 계통의 진동을 유발하지 않아야 한다. 이러한 기본적인 고려 후 설비와 인력의 이동, 장비의 설치 등이 설계되어야 전기, 용수등을 고려하여야 한다. 본 논문에서는 수직형 추진기관 시험설비를 구축하기 위한 토목/건축 및 전기/용수공급설비에 대한 전반적인 고려사항을 기술하였다. Vertical propulsion test facility is widely applied as it is similar to launch condition. Concerning infrastructure, in first, altitude difference is considered which protects structures and systems in the vicinity of the exhaust jet from this thermal load. Second, massive concrete wall which separate oxidizer and fuel, and engine and fuel/oxidizer should be considered for safety. Force flow from thrust frame to concrete structure of the bench is also considered. Next, transfer of personnel and facilities, electricity, water supply are designed. This paper present consideration points concerning infrastructure of propulsion test facility including building, civil engineering work, electricity, water supply.
조남경(Namkyung Cho),유병일(Byungil Yu),김지훈(Jihoon Kim),한영민(Yeoungmin Han),전성복(Sungbok Jun) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.12
추진기관 시스템 시험설비는 4개의 엔진이 클러스터링 되어 연소되는 가장 가혹한 조건을 가지며 이에 따라 토목, 건축, 전력설비 등의 기반시설에 대한 특별한 고려가 필요하다. 큰 추력을 지탱하고 있어야 하므로 시험대상물을 붙잡는 holding device와 그에 대한 지지구조가 마련되어야 한다. 또한 시험대상물이 진입하고 장착되는 진입로가 마련이 되어야 한다. 소방측면에서 엔진시험설비는 폭발이 일어날 경우에도 런탱크로 화재가 나지 않게 하는 방호벽이 있는데 반해, 추진기관 시스템 시험설비는 엔진 상부에 바로 케로신과 액체산소를 포힘하고 있는 형태이기 때문에 소화설비가 시험대상물에 물대포 형태로 직접 분사된다. 또한 후류의 화염강도가 매우 크므로 화염유도로 냉각을 위해 고수두 방식의 수두를 적용함으로서 전력소요를 줄이는 방법이 적용된다. Propulsion system Test complex(PSTC) has most severe test conditions with combustion of four clustered engines, which requires special considerations for infrastructure such as civil engineering work, architecture, electricity. Requirements of holding high thrust powerplants brings reliable holding structure. And long and thick test article requires ample transport road and specific treatment. For fire extinguishing device, foam water system should be provided to inject engine and feeding system, which is different from engine test facility with separation wall applied. High head water storage tank is applied to reduce electricity power requirement.
조남경(Namkyung Cho),김성혁(Sunghyuk Kim),한영민(Yeongmin Han) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
추진기관 시험설비는 시험대상체가 상위 시스템에서의 작동을 모사하여야 하며, 시험 시 파손이 발생할 수 있는 개발품의 특성상 안전하게 시험이 이루어질 수 있게 구축되어야 한다. 이를 위해 추진기관 시험설비 기반시설은 안정적인 연소가 이루어지고 사고 시에도 안전이 보장되도록 구축된다. 본 논문에서는 액체로켓 엔진 추진기관 시험설비 기반시설의 구축 및 운영 시 고려해야 할 사항에 대해 시험 스탠드, 설비의 배치, 타 설비와의 운영조합 및 공동구, 소화설비, 전력설비 측면에서 고찰하였다. Test Facilities of rocket propulsion system should provide the operation conditions of upper system to the test object and safety provisions should be provided. For this purpose infra-structure of test facilities is constructed for serving this objects. In his article, various aspects concerning infrastructure of propulsion test facilities are investigated focused on test stand, room arrangements, interface among facilities, fire-fighting facilities, electrical power facilities