http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
미국 증명표장제도와 일본의 관련제도 (상표제도, 인증제도)에 대한 고찰
조경희 ( Kyeong Hee¸ Cho ) 한국지식재산연구원 2009 지식재산연구 Vol.4 No.2
일본은 증명표장제도를 도입하고 있지 않으나 중국, 한국을 포함한 주변국가에서는 증명표장제도를 도입하고 있거나 도입안을 마련하고 있는 상태이다. 사실 일본에서도 지리적표시 보호제도로서 증명표장제도가 소개된 적이 있다. 그러나 거의 논의되지 않은 채 지리적 표시의 보호수단으로서는 기존 단체상표제도를 확장하는 형태로서 지역 단체상표제도를 실시하고 있다. 그리고 일본에서 상품의 증명제도라고 하면 일반적으로 일본공업규격(JIS)제도와 그 마크로서 JIS마크가 널리 알려져 있다. 따라서 임의적 국가제도인 JIS제도와 JIS마크가 증명표장제도와 어떠한 관련성을 갖는지를 분석하는 것은 증명표장에 대한 고찰을 위한 전제작업이라 할 수 있다. 본고의 연구대상은 미국의 증명표장제도와 관련된 일본제도만이다. 우리제도와 비교연구는 향후 연구대상으로 설정하고자 하고자 한다. 그 까닭은 일본의 제도는 주지된 바와 같이 우리제도와 유사한 제도운영을 하는 경우도 있지만 양국은 다른 경제 문화적 배경하에 제도운영 및 법적해석을 수행하고 있기 때문이다. 연구방법으로는 먼저 미국 증명표장제도의 의의 및 특징 그리고 등록효과 및 취소 등을 분석한다. 그리고 관련된 일본제도로서 상표제도와 JIS제도에 대해 기술하고자 한다. 마지막으로 미국과 일본 제도를 비교 분석함으로써 증명표장제도의 특성을 재고찰하고자 몇가지 검토과제를 설정한다. 첫번째는 증명표장제도의 도입 필요성에 대한 분석이다. WTO/TBT이후의 인증시장의 확대는 전세계적인 것으로, 일본에서도 이를 반영하여 신JIS제도가 시행되고 있다. 이 제도의 활용방법으로 증명표장제도의 도입을 고려할 수 있을까에 대해서 검토한다. 두번째는 단체표장과 증명표장과의 관계이다. 양자는 모두 단체와 관련되어 있기 때문에 실무상 상호구분이 어려운 경우가 있다. 이와 관련된 일본의 실무를 설명하고자 한다. 세번째는 지역단체상표제도와 지리적 증명표장제도의 양립 가능성이다. 지리적표시 보호를 둘러싼 일본의 실정과 문제점을 바탕으로 검토하고자 한다. 네번째는 증명표장제도의 본질적인 요소인 라이센스계약에 대한 판례를 비교법적으로 접근함으로써 증명표장의 실체를 라이센스계약의 면에서 이해하고자 한다. Japan do not have the Certification marks(CM) system, but gradually countries are adopting the system. In fact, the CM system was first talked in 2005 at government system studying group, but the system was just the third type of CM for protecting geographical indications. Japan did not adopt the CM system, instead it adopted the regional collective mark system to make the general collective mark more extensive. And, if we want to study CM in Japan, it is crucial to compare JIS(Japanese Industrial Standard) with CM, because JIS mark is well-known national voluntary certificate mark. And thus this paper first comments on the definition and the characteristics of American CM. And then it chooses the Japanese Trademark Act and Certificate system as the relating systems. Lastly, it analyzed some assignments. The first is about the examining standard of the descriptive nature against CM registration. Specifically, it focuses on the cases relating to the descriptive words like “approved by”, “inspected”, “conformed to”, “certified”. The second is concerned with the relationship between collective mark and CM. The both are practically indiscernible because of connecting with the group. However, the US accepts the CM as one type of trademark for the utility of certifying certain characteristics and the control level different with the collective marks. The third point is the compatibility of the regional-based collective mark and CM. Both countries protect the geographical indications with the Trademark Act, but the rules are difficult to apply. The final point made is a comparative analysis on the no-challenge duty in CM licensing contract. The applicable settlement systems of both are different.
건물수용가의 BESS 용량에 따른 전기사용요금 절감률 분석
조경희(Kyeong-Hee Cho),이효근(Hyo-Geun Lee),김슬기(Seul-Ki Kim),김응상(Eung-Sang Kim) 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.5
현재 에너지 절약문제는 전 세계적으로 화두가 되고 있으며, 특히 우리나라는 사용 에너지의 96.4%를 해외수입에 의존하고 있다. 또한 주변국들에 비해 에너지 소비증가율이 크고 땅이 좁으므로 기존의 수용가에 분산전원시스템과 BESS를 설치하여 에너지효율을 높이는 최적운전 계획이 불가피하다. 본 논문에서는 전력공급의 효율 및 경제성을 높일 수 있는 분산형 전원과 BESS를 모두 고려할 수 있는 실증 건물 수용가를 선정하고 에너지효율을 최대로 높이는 최적운전 계획을 위해 저장장치의 정격/용량에 따른 충방전 계획을 최적화하여 요금절감률을 비교분석한다.
PV연계 ESS의 최적 사업모델 및 용량 산정을 위한 설계 프로그램
조경희(Kyeong-Hee Cho),김슬기(Seul-Ki Kim),조형철(Hyung-Chul Jo),손완빈(Wanbin Son),김응상(Eung-Sang Kim),박준호(June Ho Park) 대한전기학회 2020 전기학회논문지 Vol.69 No.9
Under the Korea government’s Energy Transition Roadmap, energy transition is underway with the gradual reduction of nuclear power plants and the expansion of renewable energy. Moreover, in the Third Energy Master Plan, the target share of renewable energy by 2040 was increased to 30-35%. The increase in the capacity of small-and medium-sized photovoltaic power stations (PV) is the highest among different renewable energy sources. As the output of PV power stations varies considerably, linking them with energy storage systems(ESSs)is attracting attention. When designing a PV-ESS, as the investment costs are high and the applicable support policies vary with the purpose of operation, it is important to review the economic feasibility of various models before installation. However, conducting this review might be very complex and difficult for the operator. Accordingly, the present study introduces a design program for distributed resources (MODDER) that can select the optimal capacity and business model considering the domestic policies and the operating characteristics of the distributed resources. The program comprises a database of weather information, load patterns according to application, sales unit costs, electricity rate unit costs, and renewable energy system specifications and can conveniently analyze the economic feasibility of a PV-ESS by selecting and configuring it according to the user’s purpose. Accordingly, the program helps determine the optimal capacity and business model. To verify the effectiveness of the proposed program, through a case study, simulations of a demand side management business and a renewable energy generation sale business were conducted based on actual industrial customers, and the results were analyzed. The developed program can be used to maximize the return on investment of renewable power generation and ESSs, thereby reducing investment risk and contributing to improving the acceptance of renewable energy.
수용가 수요관리용 전지전력저장시스템의 최적용량 산정방법
조경희(Kyeong-Hee Cho),김슬기(Seul-Ki Kim),김응상(Eung-Sang Kim) 대한전기학회 2013 전기학회논문지 Vol.62 No.1
The paper proposes an optimal sizing method of a customer"s battery energy storage system (BESS) which aims at managing the electricity demand of the customer to minimize electricity cost under the time of use(TOU) pricing. Peak load limit of the customer and charging and discharging schedules of the BESS are optimized on annual basis to minimize annual electricity cost, which consists of peak load related basic cost and actual usage cost. The optimal scheduling is used to assess the maximum cost savings for all sets of candidate capacities of BESS. An optimal size of BESS is determined from the cost saving curves via capacity of BESS. Case study uses real data from an apartment-type factory customer and shows how the proposed method can be employed to optimally design the size of BESS for customer demand management.