http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
CBCT 영상에서 구치부의 하악관 형태에 따른 재구성 방법 연구
정천수,모은희,이기흔,한범희,김승철,김정삼,임청환 한국방사선학회 2011 한국방사선학회 논문지 Vol.5 No.5
치과 방사선 검사 중 파노라마(panorama) 촬영은 왜곡현상이 발생하여 정량적인 평가 시 부정확한 결과를 야기할 수 있다. 최근 임상에 적용되고 있는 새로운 영상화 기법인 cone beam형 전산화단층촬영(이하 CBCT)은 고해상도의 영상과 위치 정보를 제공한다. 본 실험에서는 DCT-90-P IMPLAGRAPHY Dental CT system (Vatech, Korea)을 사용하여 20명의 환자를 검사 하였고, 촬영조건은 관전압 85kVp, 관전류 7mA, 촬영시간은 24초이다. CBCT 데이터를 3차원 컴퓨터 프로그램을 이 용하여 재구성하고, 형태 계측학적으로 평가 분석하였다. 그 결과 하악체에 기울기에 따라 변화를 주었을 때, 하악관의 직경의 왜곡이 감소하는 것을 알 수 있었다. 결론적으로 피사체와 필름간의 거리가 클수록 확대가 많이 나타나고, 초점에서 벗어난 거리에 따라 영상이 차이가 있을 것으로 예상되기 때문에 재구성시 해부학적 위치의 구조에 맞게 부분적으로 알맞은 방법을 채택을 해야 하는 것 으로 사료된다. In dental radiography, panoramic views cause distortion and thus may bring about inaccurate results in the process of quantitative analysis. In this connection, there has recently been an increasing use of cone beam computed tomography (CBCT) that is known to provide high-resolution images and positional information. In this study, a dental computed tomography unit, ‘DCT-90-P IMPLAGRAPHY (Vatech, Korea)’, was applied to 20 patients for 24 seconds respectively, with a tube voltage of 85kVp and a tube current of 7mA. The data of CBCT were three-dimensionally reconstructed by use of a computer program, and were histomorphometrically analyzed. The results showed that the diameter of mandibular canal is less distorted at a certain inclination of the mandibular body. The image tends to seem more distended in proportion to the distance between the subject and film. Also, the image tends to be affected according as it is out of focus. In conclusion, it requires that the image should be reconstructed in light of anatomic position and structure.
정천수,김승렬,김남규 한국정보시스템학회 2011 情報시스템硏究 Vol.20 No.4
Recently, Information System (IS) development projects such as the next generation IS project of the financial business domain have shown tendency to become large and complex. Accordingly, a large number of enterprises have introduced a Project Management Office (PMO) to successfully manage multiple complex large-scaled projects. Many researches and empirical studies have proved the positive results of PMO-based projects. For example, most PMO-based projects have been accomplished successfully without exceeding the planned deadline and budget. However, even in the case of PMO-based projects, participants are still supported by legacy Project Management Systems (PMS) developed without considering the PMO. It implies that recent large projects are hardly performed efficiently because of the large gap between the legacy PMS tools developed only for single small projects and the real process of PMO-based project management. Therefore, we attempt to design and develop a PMO-based PMS in which the role and responsibility of PMO are completely implemented. To demonstrate our systems practicality, we applied the devised system to the real project management cases of “K” bank in The Republic of Korea. According to the results of case analysis, all of the four projects supported by our PMO-based PMS have been completed without exceeding planned deadline and budget, and the quality of their final outcome is appraised to be superior.
정보시스템개발 프로젝트에서의 효과적인 요구사항추적 관리 방안에 관한 연구
정천수,김승렬 한국컴퓨터정보학회 2012 韓國컴퓨터情報學會論文誌 Vol.17 No.5
It is very important to trace whether all the requirements has been reflected in the developed system. However, most existing researches apply Requirement Traceability Matrix(RTM) to the whole SDLC according to the development methodology. RTM has no practical value because it has not only too many pursuit items but also its tracking method is very complicated and the practical management in developing the information system is not accomplished nearly. Therefore, in this study, we proposed an enhanced RTM which was composed of only necessary items and allow us to manage the applied area effectively from Request for Proposal(RFP) or the proposal stage to SDLC stage then confirmed the effect through six actual applicable cases of information system development project of "K" company. 소프트웨어 개발 시 요구사항들이 개발시스템에 반영되었는지 추적하는 일은 매우 중요하다. 하지만 기존 연구들은 대부분 요구사항추적표를 개발관리방법론에 따른 전체 SDLC에 모두 적용하고 있다. 그리고 추적항목이 많으며 추적방법이 복잡하여 실제 정보시스템 개발에서는 실질적인 관리가 거의 이루어지고 있지 않아 실용성에 한계가 있다. 따라서 본 연구에서는 요구사항추적표를 제안요청 및 제안단계부터 SDLC단계 중에서 효과적으로 관리할 수 있는 적용범위와 요구사항추적에 꼭 필요한 항목만을 구성한 개선된 추적표를 제안하고 이를 적용한 K사의 정보시스템 개발프로젝트의 6개 실제 적용 사례를 통하여 그 효과를 확인 하였다.
일반기업의 IT조직 내 직원간 의사소통 네트워크 분석: K社를 중심으로
정천수,신길환,한우철 한국컴퓨터정보학회 2011 韓國컴퓨터情報學會論文誌 Vol.16 No.11
The purpose of this study is to give implications for cooperative network building for general corporate IT staffs as well as operational improvement of the IT organization which is a specialized unit in general company though analysis of characteristics of communication networks of the IT organization. 39 IT employees of company “A” were surveyed and interviewed, and the data collected were analyzed in a network analysis method. The analysis shows that a variety of networks were built across employees – e.g. strong/weak ties or centralized/decentralized structure – by each communication area. IT competency network was found weak ties. Career-rela ted network showed centralized and hierarchical characteristics. At the center of each network was positioned manager of each team. To address improvement of the findings, I presented the followings: more active networking over IT competency, enhancement of work centralization and collection of research data as to communication network of IT organization. 이 연구의 목적은 일반기업의 IT조직에서 형성되는 의사소통 네트워크 특성을 분석함으로써 IT직원들 간의 상호 협력 네트워크 구축 및 일반기업에서 전문화된 IT조직의 운영 개선에 시사점을 주고자 하였다. K社의 IT조직에 근무하는 39명의 직원을 대상으로 설문 조사와 면담 조사를 실시하였으며, 수집한 자료는 네트워크 분석법을 적용하여 분석하였다. 분석결과, 의사소통 영역별로 직원들 간에 강한 연결,약한 연결 혹은 집중형 구조, 분산형 구조의 모습을 보이며 다양하게 네트워크가 형성되어 있었다. 대표적으로 IT역량관련 네트워크는 약한 연결인 성긴 네트워크를 보였다. 직장생활 관련 네트워크는 중앙 집중적이고 위계적인 특성을 보였으며, 각 네트워크의 중심에는 각 팀의 부장 및 관리자들이 차지하고 있었다. 이러한 결과의 개선 방안으로 IT역량 관련 네트워크의 활성화, 업무 집중 현상 개선, IT조직의 의사소통 네트워크에 대한 연구자료의 축적을 제언으로 제시하였다.
Hyperautomation Platform 이해 및 적용방안
정천수 한국경영정보학회 2022 한국경영정보학회 학술대회논문집 Vol.2022 No.11
코로나19 사태가 장기화되면서 비대면 업무가 늘어나고 단순반복 적인 질문 및 업무에 대한 자동화 수요가 증가하였으며 지난 몇 년 동안 비즈니스 프로세스의 자동화가 증가함에 따라 점점 더 많은 기업들이 단순하고 일상적인 모든 작업을 자동화하려고 노력하였고 성과를 보고 있다. 더 나아가 복잡하고 여러 업무 프로세스를 연계해서 자동화하기 위해 AI기술등 다양한 기술을 적용하여 자동화 업무영역을 확장하고 있다. 하지만 지능형 프로세스 자동화 인 IPA부분으로의 확장에서는 아직 적용사례 및 관련 솔루션을 찾아보기 어려울 정도로 시작 단계에 머물고 있다. 따라서 복잡하고 다양한 업무 프로세스들로 구성되는 전사업무에서는 다양한 기술을 접목한 사례 및 성과자료를 가지고 의사결정을 내려야 하는 경영진 입장에서 객관적인 기준으로 삼아 도입 여부에 대한 의사결정을 내리기에는 부족한 면이 있다. 따라서 본 연구에서는 Hyperautomation에 직접적으로 연관이 있는 RPA, Chatbot, OCR, AI 기술 등을 살펴보고 Hyperautomation Platform(HAP)에 요소기술을 추가하여 지능형 프로세스 자동화를 가져올 수 있는 실질적인 적용방안을 제공하여 객관적이고 종합적으로 검토할 수 있도록 가이드를 제시하고자 한다.
IS프로젝트에서 PMS 품질이 성과에 미치는 영향에 대한 연구
정천수,안현철 한국지식경영학회 2012 지식경영연구 Vol.13 No.3
Recently because the IS development project is large scale and complicated, the necessity of tools that can manage effectively smooth communications and the harmonized project between the interested parties is exposed. According to this fact, many companies are investing enough to the PMS (Project Management System) for the sake of the systematic management of the IS development project, and also this PMS is emerging as one of the indispensable tools for the successful IS development project by casting off from a auxiliary means for the past project management. However, as had been expected, whether the introduction of the PMS is possible to facilitate communications within a project team, and a main motivation that can derive individual performance and organizational performance that participated in the IS development project is induced or not are not verified still empirically and apparently. With respect to this, a survey was conducted to examine how PMS quality affected user satisfaction, communication, individual performance and project performance. The effects of the data gathered were verified by structural equation model analysis.