RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        비선형 회귀모형을 이용한 지하저장공동 주변 현장수리지질시험 매개변수의 자동 추정

        정일문 ( Il Moon Chung ),조원철 ( Won Cheol Cho ),김남원 ( Nam Won Kim ) 대한지질공학회 2008 지질공학 Vol.18 No.4

        지하저장공동의 설계 및 효율적 유지관리를 위해서는 설계전단계에서 사전조사로서 공동주위의 대수층 매개변수를 규명하고 운영전·후의 지하수의 흐름을 해석하는 과정이 반드시 수행되어야 한다. 수리지질설계에 필요한 제반자료를 얻기 위해서는 다양한 수리시험을 수행해야하며, 이 중 시추공 주변의 수리지질특성은 필수적인 기초자료가 되므로 보다 정확한 매개변수의 산정이 요구된다. 그러나 기존에 널리 사용된 도해적 일치법을 이용할 경우, 육안 오차나 절차상의 오독 등으로 타당성이 적은 수리지질 상수값을 산정할 위험이 있으며, 산정과정에서 불필요한 작업을 수행해야 하는 단점이 있다. 최근 매개변수의 직접전환을 위한 여러 방법론이 제시되어 왔는데, 그 중에서 비선형 회귀모형을 이용하면 매개변수가 반복계산을 통해 자동추정되는 편리함이 있고 추정된 매개변수의 통계학적 타당성까지 평가할 수 있어 매우 유용한 것으로 평가되고 있다. 본 연구에서는 공동주위의 실제 수리시험 자료에 대해 기존의 도해적 방법을 거치지 않고, 비선형 회귀모형을 이용한 매개변수의 자동추정을 수행하였다. 매개변수 자동추정 과정에서 발생할 수 있는 많은 반복 계산 횟수를 줄이고 수렴불가능의 문제를 해결하는 방안으로 감쇠계수를 도입하는 방안을 함께 제시하였다. For the design and effective management of underground storage caverns, preliminary investigation on the hydrogeologic parameters around caverns and analysis on the groundwater flow must be carried out. The data collection is very imporatnat task for the hydrogeologic design so various hydraulic tests have been performed. When analyzing the injection/fall off test data, existing graphical method to estimate the parameters in Theis` equation is widely used. However this method has some sources of error when estimating parameters by means of human faults. Therefore the method of estimating parameters by means of statistical methods such as regression type is evaluated as a useful tool. In this study, nonlinear regression analysis for the Theis` equation is suggested and applied to the estimation of parameters for the real field interference data around underground storage caverns. Damping parameter which reduce the iteration numbers and inhance the convergence is also introduced.

      • KCI등재

        보수적 지하수 개발가능량 산정 방안

        정일문,김남원,이정우,이정은,Chung, Il-Moon,Kim, Nam Won,Lee, Jeongwoo,Lee, Jeong Eun 대한토목학회 2014 대한토목학회논문집 Vol.34 No.6

        지금까지 세계적으로 지하수 관리는 연간 지하수 함양량을 기반으로 한 안전채수량 정책에 의해 수행되어 왔다. 그러나 지하수 함양량은 시공간적으로 변동하므로 지속가능한 지하수자원을 평가하기 위해서는 동적 해석이 필요하다. 본 연구에서는 지표수-지하수 통합해석 모형인 SWAT-MODFLOW를 이용하여 경주지역의 지하수 함양량 공간분포를 산정하였다. 우리나라에서는 10년 빈도 갈수시 강수량에 함양계수를 곱하여 지역별 개발가능량을 산정하기에 본 연구에서는 기존 개발가능량을 평가하기 위해 빈도해석기법을 이용하였다. 소유역별 10년 빈도 갈수시의 지하수 함양량을 추정하는 보수적 방법을 제안하고 이를 기존 개발가능량과 비교하였다. 이같은 계산 절차를 통해 지하수 개발가능량을 산정하는 기존 절차의 한계를 합리적으로 제시할 수 있었다. By far, groundwater management has been conducted by 'safe yield' policy based on the estimation of annual average of groundwater recharge throughout the world. However, as groundwater recharge show spatiotemporal variation, dynamic analysis must be carried out to evaluate the sustainable groundwater resources. In this study, an integrated surface-groundwater model, SWAT-MODFLOW was used to compute the spatial distribution of groundwater recharge in Gyungju region. Frequency analysis is adopted to evaluate the existing values of potential amount of groundwater development which is made by the 10 year drought frequency rainfall multiplied by recharge coefficient. The conservative methods for estimating recharge rates of 10 year drought frequency in subbains are newly suggested and compared with the existing values of potential amount of groundwater development. This process will promote the limitations for existing precesses used for computing potential amount of groundwater development.

      • KCI등재

        춘천 물로리 지역 샌드댐 채움재 수리특성에 따른 배수량 평가

        정일문,이정우,김민규,김일환,Chung, Il-Moon,Lee, Jeongwoo,Kim, Min-Gyu,Kim, Il-Hwan 한국수자원학회 2022 한국수자원학회논문집 Vol.55 No.11

        The Chuncheon Mullori area is an underprivileged area of water welfare where local water supply is not supplied, and it is supplying water to the villages with small water supply facilities using lateral flow and groundwater as water sources. This is an area with poor water supply conditions, such as relying on water trucks due to water shortages during the recent severe drought. Therefore, in order to solve the problem of water shortage during drought and to prepare for the increasing water demand, a sand dam was installed along the valley, and this facility has been operating since May 2022. In this study, repeated simulations were performed according to the hydraulic conductivity of the filler material and the storage coefficient value for the inflow condition for about two years from mid-March 2020 to mid-March 2022. For each case, the amount of discharge through the perforated drain pipe was calculated. Overall, as the hydraulic conductivity increased, the amount of discharge and its ratio increased. However, when the hydraulic conductivity of the second floor was relatively low, the amount of discharge increased and then decreased as the hydraulic conductivity of the third floor increased. This is considered to be due to the fact that the water level was kept low due to the rapid drainage compared to the net inflow into the third floor because the water permeability of the third floor and the drainage coefficient of the drain pipe were large. As a result of simulating the flow of the open channel in the upper part of the sand dam as a hypothetical groundwater layer with very high hydraulic conductivity, the decrease in discharge rate was slower than the increase in the hydraulic conductivity of the hypothetical layer, but it was clearly shown that the discharge volume decreased relatively as the hydraulic conductivity of the virtual layer increased.

      • KCI등재

        유역 유출과정과 지하수위 변동을 고려한 분포형 지하수 함양량 산정방안

        정일문,김남원,이정우,Chung, Il-Moon,Kim, Nam-Won,Lee, Jeong-Woo 한국지하수토양환경학회 2007 지하수토양환경 Vol.12 No.5

        우리나라에서 대표적으로 사용되어 온 지하수 함양량 산정방법은 지하수 감수곡선에 의한 기저유출분리법, 유역내의 집중형 개념모형에 의한 물수지 분석, 그리고 지하수위 변동곡선법으로 대별된다. 지하수 함양량은 기후조건, 토지이용 그리고 수문지질학적 불균질성에 따르는 시공간적인 변동성을 나타내므로 전술한 방법들은 이같은 특성을 다루기에는 많은 제약을 가진다. 이 같은 단점을 극복하기 위해 본 연구에서는 통합 지표수-지하수 모형인 SWAT-MODFLOW로부터 얻어진 물수지 성분을 기초로 한 새로운 함양량 추정방법을 제시하고자 한다. 하천변에 위치한 지하수위는 하천흐름과 유사한 동적변화를 나타내는 반면 보다 상류부에 위치한 지하수위는 강수에 대하여 일정한 지체현상을 나타낸다. 이와 같은 지하수위 변동의 특징은 함양의 물리적 특성과 관련되므로 이 같은 현상을 설명하기 위해서는 토양층을 통과한 물이 대수층 함양에 도달하는데 걸리는 시간적 지체를 설명하는 것이 필요하다. SWAT 모형에서는 주어진 날에 대해 물이 토양층을 통과하여 대수층으로 함양되는 과정을 설명하기 위해 지수형태의 감쇠가중함수를 가진 단일 저수지 저류 모듈을 사용한다. 그런데 이 모듈은 지체시간이 긴 경우나 추정된 함양의 시계열이 지하수위 시계열과 잘 맞지 않는 제한 사항을 가지므로, 본 연구에서는 비포화대를 통과하는 시간 지체를 보다 현실적으로 반영할 수 있는 다단 저수지 저류 추적 모듈을 개발하여 SWAT모형에 탑재하였으며, 이 모듈내의 시간지체와 관련된 매개변수는 관측지하수위와 모의 함양량의 상관관계를 검토함으로써 최적화가 이루어지도록 하였다. 본 연구방법의 최종 단계는 모의 지하수위와 관측 지하수위, 그리고 관측 유역유출량과 모의 유출량을 검증함으로써 종결된다. 새롭게 제안된 방법을 우리나라 미호천 유역에 적용하여 지하수 함양량의 시공간적 분포를 추정하였는데 제시된 방법이 유역 모형의 효율성과 지하수위 변동법의 정확성이라는 장점을 모두 가진 방법이어서 추정된 일 함양량은 수리지질학적 불균질성, 기후조건, 토지이용과 토양층과 대수층의 거동까지 반영한 매우 개선된 값으로 판단된다. In Korea, there have been various methods of estimating groundwater recharge which generally can be subdivided into three types: baseflow separation method by means of groundwater recession curve, water budget analysis based on lumped conceptual model in watershed, and water table fluctuation method (WTF) by using the data from groundwater monitoring wells. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, so these methods have various limits to deal with these characteristics. To overcome these limitations, we present a new method of estimating recharge based on water balance components from the SWAT-MODFLOW which is an integrated surface-ground water model. Groundwater levels in the interest area close to the stream have dynamics similar to stream flow, whereas levels further upslope respond to precipitation with a delay. As these behaviours are related to the physical process of recharge, it is needed to account for the time delay in aquifer recharge once the water exits the soil profile to represent these features. In SWAT, a single linear reservoir storage module with an exponential decay weighting function is used to compute the recharge from soil to aquifer on a given day. However, this module has some limitations expressing recharge variation when the delay time is too long and transient recharge trend does not match to the groundwater table time series, the multi-reservoir storage routing module which represents more realistic time delay through vadose zone is newly suggested in this study. In this module, the parameter related to the delay time should be optimized by checking the correlation between simulated recharge and observed groundwater levels. The final step of this procedure is to compare simulated groundwater table with observed one as well as to compare simulated watershed runoff with observed one. This method is applied to Mihocheon watershed in Korea for the purpose of testing the procedure of proper estimation of spatio-temporal groundwater recharge distribution. As the newly suggested method of estimating recharge has the advantages of effectiveness of watershed model as well as the accuracy of WTF method, the estimated daily recharge rate would be an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers and aquifers.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼