http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전형구,Jeon, Hyoung-Goo 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.4
본 논문은 orthogonal frequency division multiplexing (OFDM) 통신에서 효율적인 블라인드(blind) 주파수 옵셋 추정 방식을 제안한다. 제안된 방식은 오버샘플링과 OFDM 시스템의 cyclic prefix (CP)를 이용하여 시간차가 있는 2개의 OFDM 신호 블록을 얻고 이를 이용하여 블라인드 주파수 옵셋 추정을 위한 비용함수를 정의한다. 본 논문에서는 제안된 비용함수가 코사인 함수로 근사화 될 수 있음을 보였으며 코사인 함수의 기본적인 특성을 이용하여 주파수 옵셋을 추정할 수 있는 폐쇄형(closed form) 추정 공식을 유도하였다. 이 코사인 함수를 이용하면 전체 주파수 옵셋 범위에 대한 탐색 없이 최저 비용함수 값을 쉽게 계산할 수 있기 때문에 주파수 옵셋 추정이 효율적이다. 제안된 방식은 탐색이 필요 없기 때문에 기존의 블라인드 ML 기법보다 계산량이 약 97% 감소하며 컴퓨터 시뮬레이션 결과 평균제곱오차 (mean square error, MSE) 성능이 기존의 ML 기법이나 MUSIC 방식보다 우수함을 보였다. In this paper, an efficient blind carrier frequency offset (CFO) estimation method in orthogonal frequency division multiplexing (OFDM) systems is proposed. In the proposed method, we obtain two time different received OFDM symbols by using both the cyclic prefix and oversampling technique, and a cost function is defined by using the two OFDM symbols. We show that the cost function can be approximately expressed as a cosine function. Using a property of the cosine function, a formular for estimating the CFO is derived. The estimator of the CFO requires three independent cost function values calculated at three different points of frequency offset. The proposed method is very efficient in computational complexity since no searching operation for the minimum cost value is required. The proposed method reduces 97% of the amount of FFT computation, compared with the ML method. Unlike the conventional methods such as the ML method and the MUSIC] method, the accuracy of the proposed method is independent of the searching resolution since the closed form solution exists. The computer simulation shows that the performance of the proposed method is superior to those of the MUSIC and the ML method.
전형구,김준식,Jeon, Hyoung-Goo,Kim, Jun-Sig 한국정보통신학회 2015 한국정보통신학회논문지 Vol.19 No.10
본 논문에서는 4 × 4 multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) 시스템에서 사용 가능한 Walsh 부호화된 시간영역 훈련신호를 설계하고 채널 추정 방법을 제안하였다. 제안된 방법은 다중 경로 지연신호에 의하여 발생되는 훈련 신호간 상호간섭를 고려하면서 채널 응답 추정 공식을 closed-form으로 유도하였다. 컴퓨터 모의 실험결과 제안된 방법은 기존의 방법<xref>[9</xref>,<xref>14]</xref>에 비하여 성능이 우수하고 직교 훈련신호 설계시 대역폭을 증가시키지 않으며 4 × 4 MIMO-OFDM 시스템에서 널(null) 부반송파 존재하여도 채널 추정이 수행될 수 있음을 보였다. In this paper, the Walsh coded orthogonal training signals for 4 × 4 multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems are designed and the channel estimation equations are derived as a closed form, taking account of the inter training signal interference problems caused by the multi-path delayed signals. The performances of the proposed channel estimation method are analyzed and compared with the conventional methods<xref>[9</xref>,<xref>14]</xref> by using computer simulation. The simulation results show that the proposed methods has better performances, compared with the conventional methods<xref>[9</xref>,<xref>14]</xref>. As a result, the proposed method can be used for MIMO-OFDM systems with null sub-carriers.
MIMO 수신기에서 사전 Maximum Likelihood 검파 검증기 설계
전형구,배진호,이동훈 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.11
This paper proposes a prior maximum likelihood (ML) detection verifier which has an ability to verify if the zero forcing (ZF) detection results are identical to the ML detection results. Since more than 90% of ZF detection results are identical to ML detection results, the proposed verifier makes it possible to omit the computationally complex ML detection in 90% cases of MIMO signal detections. The proposed verifier is designed by using the diversity gain obtained from converting MIMO signal into single input multiple output (SIMO) signals. In the proposed method, single input multiple output (SIMO) signals for each transmit antenna are separated from MIMO signals after the MIMO signals are detected by ZF method. Computer simulations show that the true alarm probability of the proposed verifier is more than 80% and the false alarm probability is less than 10-⁴ 본 논문에서는 multiple input multiple output (MIMO) 시스템에서 Zero Forcing (ZF) 검파 결과가 Maximum Likelihood (ML) 검파 결과와 일치하는지 여부를 사전에 검증할 수 있는 사전 검증기를 제안하였다. MIMO 수신기에서 ZF 검파 결과는 신호 대 잡음 환경이 양호한 경우 약 90% 이상이 ML 검파 결과와 일치하기 때문에 제안된 검증기를 사용하여 MIMO 신호를 검파하면 10% 정도만 계산량이 복잡한 ML 검파 방식을 사용하고 나머지는 간단히 ZF 검파만 수행하면 된다. 제안된 검증기는 ZF 검파 결과를 이용하여 MIMO 신호를 single input multiple output (SIMO) 신호로 변환한 후 검파를 수행하면 안테나 다이버시티 이득을 얻을 수 있고 잡음 분산이 줄어드는 효과를 이용하여 설계되었다. 컴퓨터 시뮬레이션 결과 사전 검증기는 신호 대 잡음이 양호한 경우 80%이상의 정확한 true 판정 확률을 얻었으며 이때 false 판정 확률은 10-⁴정도를 보였다.
범용 실시간 O.S.와 프로세스 보드의 인터페이스 설계
전형구,김진수,김남수,조병진,Jeon, H.G.,Kim, J.S.,Kim, N.S.,Jho, B.J. 한국전자통신연구원 1993 전자통신동향분석 Vol.8 No.2
복잡하고 다양한 기능을 갖는 컨트롤 시스팀은 멀티태스킹 구조를 요구한다. 또한 멀티태스킹 구조에서는 태스크 사이의 통신, 스케줄링 기능, 메모리 관리 기능등을 갖춘 실시간 O.S.를 필요로 한다. 타깃 컨트롤 보드에서 범용 실시간 O.S.를 수행시키려면 H/W 인터페이스용 BSP(Board Support Package) 프로그램이 요구된다. 본 고에서는 범용 실시간 O.S.와 프로세스 보드와의 인터페이스(BSP) 프로그램을 설계하였고 간단한 응용 프로그램으로 BSP 기능을 확인하였다.