http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Q-Polynomial을 이용한 Korsch 망원경의 비구면 공차 분석 방법 연구
전원균,이한율,이상민,김기환,박승한,정미숙 한국광학회 2020 한국광학회지 Vol.31 No.6
In this paper, we study the analysis method for the aspherical tolerance of a Korsch telescope using a Q polynomial. It is important to analyze the tolerances for evaluating quality in high-precision fabrication of aspherical reflectors for high-resolution satellites. Thus we express the aspheric surface in terms of a Q polynomial in which each coefficient term is composed independently, and analyze the tolerance of a Korsch telescope. We also analyze the tolerance using Zernike fringe sag, which expresses the shape error of an aspherical mirror. By comparing the two results, we confirm that the Q-polynomial method can be used to analyze an aspherical mirror.
조리개 위치 변경을 통한 비축 삼반사 망원경 광학계의 성능 및 민감도 개선 연구
이한율,전원균,이상민,김기환,서현주,박승한,정미숙,Lee, Han-Yul,Jun, Won-Kyoun,Lee, Sang-min,Kim, Ki-hwan,Seo, Hyun-Ju,Park, Seung-Han,Jung, Mee-Suk 한국광학회 2021 한국광학회지 Vol.32 No.1
본 논문에서는 인공위성용 비축 삼반사 망원경의 조리개 위치에 따른 광학계 연구를 진행하였다. 인공위성 광학 탑재체로 주로 사용되는 비축 삼반사 망원경은 높은 해상도와 넓은 화각을 가져야 한다. 또한, 광학계가 구조적으로 비축상에 위치하여 조립이 어려우므로 넓은 공차범위를 가져야 한다. 그러나 조리개의 위치 선정에 따라 광학계의 성능 차이 이외에도 민감도의 차이가 있어, 사용 목적에 따른 적합한 조리개의 위치 선정이 중요하다. 따라서 본 논문에서는 조리개 위치가 각각 다른 비축 삼반사 망원경을 설계하고 성능 및 민감도 분석을 진행하여 적합한 조리개의 위치를 제시하였다. In this paper we have studied an optical system according to the aperture position of an off-axis TMA telescope for satellites. An off-axis TMA telescope should have high resolution and wide field of view (FOV). In addition, the optical system should have a wide tolerance range, because it is structurally located off-axis and is difficult to assemble. However, there are differences in performance and sensitivity according to the aperture-stop position, so it is important to select a suitable aperture-stop position. Therefore, in this paper we have designed each off-axis TMA telescope according to the aperture-stop position, and have analyzed the performance and sensitivity to suggest a suitable aperture-stop position.
제논 플래시 램프 사용 시 조사 영역 균일도 개선을 위한 반사경 설계
김서영,이한율,전원균,강동화,조예지,정미숙,Kim, Seo-Young,Lee, Han-Yul,Jun, Won-Kyoun,Kang, Dong-Hwa,Jo, Ye-Ji,Jung, Mee-Suk 한국광학회 2019 한국광학회지 Vol.30 No.5
본 논문은 광 소결 공정에 쓰이는 제논 플래시 램프 사용 시 조도 균일도를 개선시킬 수 있는 반사경 설계에 대한 연구를 진행하였다. 조사 영역에서 기판의 완전한 소결이 이루어지기 위해서 광효율과 조도 균일도를 목표 성능으로 설정하였다. 기존의 타원 반사경 또는 포물 반사경을 이용한 방식은 광효율을 만족하기 용이하지만 조도 균일도를 만족하는데 어려움이 있다. 따라서 본 논문에서는 조도 균일도를 만족시키기 위해 포물경의 중앙부에 쌍오목 형상을 추가하였다. 이러한 쌍오목 형태의 중앙부 형상을 갖는 포물 반사경의 조도 균일도가 기존의 반사경에 비해 향상됨을 확인하였다. In this paper, we studied a reflector design that can improve the illuminance uniformity when using a xenon flash lamp in the photonic sintering process. To achieve complete sintering of substrates in the irradiated area, the light efficiency and illuminance uniformity were set to target performance. Existing elliptical reflectors or parabolic reflectors make it easy to satisfy the target light efficiency, but have difficulty satisfying the illuminance uniformity. In this paper, a twin-concave feature has been added to the center of the parabolic reflector to satisfy the illuminance uniformity. It was confirmed that the illuminance uniformity of the parabolic reflector with a twin-concave feature was improved, compared to that of the traditional reflector.
서진희,조예지,이현화,서재영,전원균,이한율,강동화,정미숙 한국광학회 2018 한국광학회지 Vol.29 No.6
In this paper, we study a method of designing a reflector for LED light sources with an asymmetric light distribution. In a sports game, lighting with a symmetric distribution makes the athlete and spectators look directly at the light source, so it can cause glare. We derive the optimal tilt angle and design a reflector with asymmetric light distribution to solve these problems. Afterward, performance is analyzed according to the tennis-court lighting standard, and is confirmed to meet the class 1 European standard.
구리 분말을 혼입한 모르타르의 강도 및 염화물 침투 저항 특성
김일순 ( Kim¸ Il-sun ),전원균 ( Jeon¸ Won-kyun ),김희규 ( Kim¸ Hee-gyu ),최소영 ( Choi¸ So-yeong ),양은익 ( Yang¸ Eun-ik ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.2
본 연구에서는 구리 분말이 혼입된 모르타르의 휨 강도, 압축 강도, 응결 시간 및 염화물 침투 저항성을 평가하였다. 실험 결과, 구리 분말 혼입을 5.0%까지 휨 및 압축 강도가 증가하는 경향을 나타내었다. 구리 분말의 혼입율이 증가할수록 염화물 침투 저항성은 감소하는 경향을 나타내었으며, 응결 시간은 구리 분말 혼입율이 증가할수록 초결 및 종결 시간이 증가하는 것으로 나타났다. 중금속이자 전도체인 구리 분말이 염화물 침투 저항성 및 응결 시간에 영향을 준 것으로 판단된다.
피톤치드와 제올라이트를 혼입한 모르타르의 기초 물성 평가
김일순 ( Kim¸ Il-sun ),김희규 ( Kim¸ Hee-gyu ),전원균 ( Jeon¸ Won-kyun ),최소영 ( Choi¸ So-yeong ),양은익 ( Yang¸ Eun-ik ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.2
본 연구에서는 피톤치드와 제올라이트가 동시에 혼입된 모르타르의 플로, 휨 강도, 압축 강도 및 염화물 침투 저항성을 평가하였다. 실험결과, 플로 값은 모든 배합에서 기준 배합보다 약 4% 이내로 감소하는 경향을 나타내었다. 모르타르의 휨 및 압축 강도는 기준 배합보다 증가하는 경향을 나타내었고, 염화물 침투 저항성은 기준 배합보다 확산계수가 감소하는 경향을 나타내었다. 제올라이트의 포졸란 반응과 유효 물-시멘트비 감소가 모르타르의 기초 물성에 영향을 준 것으로 판단된다.