http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전신성,김정환,김남찬 광운대학교 신기술연구소 1997 신기술연구소논문집 Vol.26 No.-
본 연구에서는 우선 장래 폐기물조성에 대한 조사가 이루어졌으며 이 조사는 2000년대의 적절한 매립방법을 결정하기 위해 이용되었다. 실험에는 매립방법에 따른 침출수특성을 비교하기 위해 2가지 형태의 모형매립조가 사용되었는데, 하나는 혐기성 위생매립조이고 다른 하나는 침출수재순환형준호기성 위생매립조이다. 충전에 사용된 소각재는 교내소각로에서, 폐기물은 장래 폐기물조성 분석치로부터 인위적으로 합성하였으며 소각재와 폐기물은 부피비로 50:50으로 충전하였다. 실험결과 침출수질면에서 침출수재순환형 준호기성매립조가 혐기성위생매립조보다 양호한 결과를 보였다. The estimation of a future waste composition was performed in this study. This estimation was used to determine an appropriate landfill method in 2000’s. For the experiment. two different types of reactors were made : an anaerobic sanitary landfill lysimeter with ashes and wastes, and a quasi-aerobic sanitary landfill lysimeter with ashes and wastes that recycles leachates. The two reactors were used to compare the leachate characteristics according to their landfill methods. Ashes were from the incineration furnace at campus. Wastes were collected and classified artificially according to an estimation of a future waste composition. Ashes and artificially classified wastes were mixed half and half by volume. For the quality of leachate, the leachate-recycled quasi-aerobic mixed sample lysimeter showed the better result except for chloride and total suspended solids.
바닥재 잔골 재를 활용한 유황고형화 성형물의 압축강도 특성에 대한 실험적 연구
홍범의 ( Bum Ui Hong ),최창식 ( Chang Sik Choi ),윤정호 ( Jung Ho Yun ),엄민섭 ( Min Seop Eom ),전신성 ( Sin Sung Jeon ) 한국공업화학회 2012 공업화학 Vol.23 No.3
석탄 화력발전소에서 발생되는 석탄회중에서 약 10∼15%를 차지하는 바닥재는 산업폐기물로서 대부분 매립 처리되거나 콘크리트의 첨가제로 일부 활용되고 있다. 바닥재 골재는 발생 특성상 기존의 모래나 자갈보다 가볍고, 흡수율이 높아 강도 등 물리적 성질이 다소 떨어지는 문제점이 있다. 본 연구에서는 바닥재의 이러한 단점을 보완 할 수 있고 매립되는 바닥재의 활용율을 극대화하기 위한 연구의 일환으로 바닥재와 유황을 이용한 산업건설용 자재를 제작하기 위한 기초 자료를 제시하고자 한다. 가온형 혼합기 사용에 따른 바닥재 잔골재 입도와 유황함량을 실험 변수로 국내 4개 발전사에서 발생되는 바닥재를 이용하여 고형화 성형물을 제작한 후 압축강도 테스트를 수행하였다. 그 결과 압축강도는 유황의 함량, 바닥재 입도에 동시에 영향을 받는 결과를 보였으며, 최대 약 92MPa의 결과를 나타내었다. 압축강도는 세골재와 미립분이 혼합된 1.2 mm 이하의 입도와 높은 유황함량에서 높은 결과를 나타내었다. Differently from fly ash, the bottom ash produced from thermal power generation has been treated as an industrial waste matter, and almost reclaimed or was applied with the additive of the part concrete. Bottom ash has various problems to use with the aggregate. Bottom ash is lighter than typically the sand or the gravel and it`s physical properties (compressive strength etc.) is somewhat low because of high absorptance. In order to manufacture the ash concrete, we used a bottom ash as a main material and a pure sulfur as a binder. In this study, fundamental research methods that vary the grain-size of bottom ash and the ratio of sulfur vs ash were investigated to improve the quality of ash concrete such as compressive strength. Bottom ash in this research which occurs from domestic 4 place power plants, was checked physical and chemical properties. The compressive strength seems the result which simultaneously undergoes an influence in content of the sulfur and Bottom ash grain-size. We got the result of the maximum 92MPa. The compressive strength was high result for grain size below 1.2 mm and high sulfur content.