http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지반-라이닝 상호작용 모델을 이용한 터널 2차라이닝 설계에 관한 연구
장석부,허도학,문현구,Chang, Seok-Bue,Huh, Do-Hak,Moon, Hyun-Koo 한국터널지하공간학회 2006 한국터널지하공간학회논문집 Vol.8 No.4
일반적으로 터널2차라이닝의 구조해석에는 골조해석모델이 적용되고 있다. 본 모델은 경험적 방법에 의한 지반 이완하중을 고려하고 있으나 주관적이고 과대평가되는 경향이 있다. 2차라이닝에 작용하는 지반하중은 숏크리트 및 록볼트와 같은1차지보재의 지지력 상실에 기인한다. 그러므로 2차라이닝에 작용하는 지반하중 산정에는 1차지보재와 지반의 평형상태가 고려되어야 한다. 지반-라이닝 상호작용(Ground-Lining Interaction, GLI)모델은1차지보재의 지지력 상실에 의해 야기된 지반의 변형을2차라이닝이 지지하는 개념을 토대로 수립되었다. 따라서 GLI모델은 복잡한 지반조건과 1차 지보재의 설치조건을 합리적으로 반영한 지반하중을 고려할 수 있다. 2차라이닝에 작용하는 하중은 지반하중 외에 지하수압, 지진하중 등이 있다. 극한강도 설계법을 이용한 라이닝 구조보강을 위해서는 계수하중 및 다양한 하중조합이 고려되어야 한다. GLI모델은 계수하중을 고려하기 곤란하기 때문에 개별 하중에 대해 산정된2차라이닝 단면력에 하중계수를 곱하는 중첩의 원리를 적용하였다. 끝으로, 본 연구에서 제시된 GLI모델을 이용한 2차라이닝 설계방법을 저심도 지하철 터널에 적용하였다. The structural analysis for the secondary lining of tunnels is generally performed by a frame analysis model. This model requires a ground loosening load estimated by some empirical methods, but the load is likely to be subjective and too large. The ground load acting on the secondary lining is due to the loss of the supporting function of the first support members such as shotcrete and rockbolts. Therefore, the equilibrium condition of the ground and the first support members should be considered to estimate the ground load acting on the secondary lining. Ground-lining interaction model, shortly GLI model, is developed on the basis of the concept that the secondary lining supports the ground deformation triggered by the loss of the support capacity of the first support members. Accordingly, the GLI model can take into account the ground load reflecting effectively not only the complex ground conditions but the installed conditions of the first support members. The load acting on the secondary lining besides the ground load includes the groundwater pressure and earthquake load. For the structural reinforcement of the secondary lining based on the ultimate strength design method, the factored load and various load combination should be considered. Since the GLI model has difficulty in dealing with the factored load, introduced in this study is the superposition principle in which the section moment and force of the secondary lining estimated for individual loads are multiplied by the load factors. Finally, the design method of the secondary lining using the GLI model is applied to the case of a shallow subway tunnel.
대전역사 하부통과 3-arch 터널의 설계사례 연구 (I)
장석부,문상조,권승,허도학,배규진 사단법인 한국터널지하공간학회 2002 한국터널지하공간학회논문집 Vol.4 No.3
본 논문은 대전역사 하부를 대단면 3-arch 터널로 횡단하기 위한 설계사례를 소개하였다. 본 구간의 당초 계획은 파이프루프에 의한 언더피닝 공법이었으나, 시공상의 어려움과 안전상의 문제로 터널공법으로 변경되었다. 터널폭은 약 28m로 현재까지 국내에서 건설된 터널중 최대폭이고 높이는 10m 이다. 지반조건으로 토피는 터널폭보다 작은 23m 에 불과하며 터널 주변지반은 풍화암이다. 또한, 지상의 대전역사와 경부선 선로의 허용침하기준이 매우 엄격하였다. 따라서, 터널안정성 확보와 더불어 지반침하를 최대한 억제하기 위하여 다양한 대책을 적용하였으며, 이를 검토하기 위하여 2차원 및 3차원 수치해석을 수행하였다. This paper presents the design case of the 3-arch tunnel under Daejeon railroad station building. The original construction method was the underpinning method supported by pipe-roof, but it was changed to the mined tunnelling method because of the complex construction condition and the safety problem. This 3-arch tunnel has a width of 28 meters and a height of 10 meters. Overburden is only 23m and the ground around the tunnel is a weathered rock. The allowable settlements for the station building and some railroads are very strict. Accordingly, various measurements for the tunnel stability and the settlement minimization was applied and they were reviewed by 2-D and 3-D numerical analysis.
대단면 암반터널의 안정성에 미치는 숏크리트 부착강도의 영향에 관한 연구
장석부,홍의준,문상조,Chang, Seok-Bue,Hong, Eui-Joon,Moon, Sang-Jo 한국터널지하공간학회 2005 터널기술 Vol.7 No.4
암반에 건설되는 대단면 터널에서 숏크리트의 부착강도는 암반탈락 방지와 발파진동에 의한 숏크리트 탈락방지에 매우 중요하다. 그럼에도 불구하고 숏크리트 부착강도는 압축강도에 비하여 설계 및 시공단계에서 중요한 요소로 고려되지 않았다. 따라서 본 연구의 목적은 숏크리트 부착강도가 대단면 암반 터널의 안정성에 미치는 영향을 분석하는 것이다. 먼저, Holmgren의 punch-loaded 시험조건을 모사한 수치해석 모델을 이용하여 다양한 부착강도에 대한 매개변수연구를 수행하였다. 그 결과, 숏크리트의 최대지지력은 숏크리트층과 블록간의 부착 강도와 선형 비례관계를 보임을 확인하였다. 또한, 숏크리트층과 굴착면에 부착강도를 고려하는 경우와 기존의 완전부착 조건에 대한 개별요소해석을 수행하여 숏크리트 부착강도의 영향을 검토하였다. Shotcrete adhesive strength in large section tunnels in jointed rock masses plays an important role in preventing rock block from falling and shotcrete debonding due to blasting vibration. Nevertheless, it has not been considered as a major factor such as shotcrete compressive strength in design and construction. For this reason, the purpose of this study is to analyze the effect on shotcrete adhesive strength for large-sectioned tunnels. First, the parametric study using numerical model similar to Holmgren's punch-loaded test was executed for various range of adhesive strength. It shows that the shotcrete bearing capacity is linearly proportioned to the adhesive strength between shotcrete layer and blocks. And then, distinct element analysis of a jointed rock tunnel for an adhesive strength of 1 MPa and a conventional fully-bonded condition between the shotcrete layer and the excavation face was compared in order to evaluate the effect of the shotcrete adhesive strength.