http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
시추공 수리전도도 상수를 결정하기 위한 전기전도도검층 기법을 이용한 예비모형실험
김영화,임헌태 한국지하수토양환경학회 2003 지하수토양환경 Vol.8 No.1
간단한 모형시추공을 이용한 전기전도도 측정실험을 실시하고 이로부터 시추공에서의 수리상수 결정에 관련된 제반기초 환경을 검증하고 실험에 의한 모델방정식을 유도하였다. 실험은 상대적으로 높은 염도를 공내수로 하고 증류수를 지하수를 사용하여, 지하수의 유입과 유출되는 유량을 일정하게 유지한 상태에서 전기전도도를 측정하는 것으로 이루어졌다. 관찰의 주 대상은 지하수의 유량, 공내수와 지하수 사이의 염도차 및 밀도차에 따른 공내에서의 전기전도도 변화 양상에 있었다. 실험결과, 공내에서의 시간에 따른 전기전도도 변화가 매우 일정한 양상으로 나타남을 보였으며, 유량과 전기전도도 변화율 사이에 양호한 상관관계가 얻어졌다. 이 결과는 향후 추가될 일반적인 수리상수와 검층수리 상수들의 비교연구로 모델방정식에 대한 검증이 이루어진다면, 희석모델에 근거한 전기전도도검층 기법이 수리 상수 결정을 위한 효과적인 방법이 될 수 있음을 보여 주었다. A geophysical conductivity logging technique has been adopted to determine hydraulic constants using a simplified physical model that depicts the borehole condition. An experiment has been made by monitoring the conductivity change within the model hole using borehole environment water and incoming-outgoing water of different salinity, under the state of constant flow rate by maintaining balance between inflow and outflow. Conductivity variation features were observed that depended on flow rate, salinity contrasts between fluid within the hole and incoming-outgoing fluid, and density contrasts between fluid conductivity within the hole and incoming fluid. The results of the experiment show the uniform change of fluid conductivity within the hole with time, a fairly good correlation between the flow rate and the conductivity change rate. The geophysical conductivity logging technique can be an efficient tool for determining hydraulic constants if the model equation is verified by henceforward experiments.
김영화,박정빈,임헌태 대한지질공학회 2003 지질공학 Vol.13 No.3
모형시추공 내에서 공내수 전기전도도의 자동 측정시스템을 구축하고 이로부터 수리상수 결정과 관련된 제반 기초 환경을 검증하였다. 실험은 상대적으로 높은 염도를 공내수로 하고 증류수를 지층수로 사용하여 지층수의 유입과 유출되는 유량을 일정하게 유지한 상태에서 공내수의 전기전도도 프로파일을 구하는 방식으로 이루어졌다. 관찰의 주 대상은 공내수와 지층수 사이의 염도차. 온도차 및 지층수의 유입량. 유입 ·유출구에 따른 모형시추공 내에서의 전기전도도 변화 양상 파악에 있었다. 실헌결과, 이들 요인이 미치는 영향범위와 적정 측정 환경이 제시되어 향후 모델 실험 및 원위치시험에서 적용될 기초실험 여건이 마련되었다. We setup a continuous measurement system for electrical conductivity of fluid in a model borehole and verified the basic environments in electrical conductivity measurement for estimating hydraulic constants. The experiment was made by monitoring the conductivity change within the hole using NaCI solution of different salinities and incoming formation fluid using distilled water. The experiment was made under the state of constant flow rate by maintaining balance between inflow and outflow. Conductivity variation features were observed by controlling salinity contrasts and temperature differences between fluid within the hole and incoming formation fluid. flow rate and the location of inlet and outlet. The results of the experiment show well the role of each affecting factor on the conductivity distribution. and suggest appropriate environments for conductivity measurements. It is considered that the basis of the conductivity measurement for henceforward laboratory model and/or in-situ borehole experiment has been prepared.