http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임재광 한국초등미술교육학회 2013 미술교육연구논총 Vol.36 No.-
본 논문은 2012년 학교 문화예술교육 미술분야 시범사업의 경험을 통해 초등학교미술분야 예술강사 프로그램을 추진할 때 초등교사와 예술강사 간 협력 및 역할분담을어떻게 하는 것이 바람직할 것인지에 대한 해결책을 도출하고자 하였다. 초등학교 교육과정의 특성을 고려할 때 예술강사 프로그램은 정규 교육과정과 효과적으로 연계됨으로써 기대했던 성과를 거둘 수 있을 것으로 판단된다. 이를 위해 학교 측의 수익자부담 필요성과 예술강사 프로그램 관리 측면에서의 개선 필요성을 성공적 예술강사 프로그램의 집행을 위한 전제조건으로 제시하였다. 이와 함께 초등 미술교육을 위한 초등교사와 예술강사 간 역할분담방안을 정규수업 형식으로 수행될 경우와 창의적 체험활동으로 수행될 경우로 구분하여 제시하였다. 먼저, 정규수업 형식으로 추진될 경우에는 분담형, 교사주도형, 예술강사주도형, 파트너십형 역할분담을 고려할 수 있는데어떤 모형을 채택할 것인지는 초등교사와 예술강사의 전문성 수준에 달려있다고 하겠다. 그리고 창의적 체험활동 형식을 채택하는 경우는 정해진 교안에 따라 획일적으로수업이 이루어져서는 안 되며 학생들의 참여를 보장하는 가운데 초등교사와 예술강사는 촉진자이자 조력자의 역할을 수행하여야 할 것이다. 2013년 미술분야 시범사업에서는 기본교과와 연계하도록 하고 개학 이전에 참여학교를 선정하였다. 그러나 초등학교 미술교육과 예술강사 프로그램을 효과적으로 연계시키기 위해서는 초등교사와 예술강사 간 협력이 필수적이므로 협력수업의 실시 전에 참여학교의 초등교사와 예술강사가 함께 참여하는 연수프로그램을 실시하여 사전협의를 통해 교수설계 및 수업준비를 할 수 있도록 제도적 절차를 마련하고 학교 측의 적극적 관심과 지원을 이끌어내기위한 방안이 강구되어야 할 것이다.
온도 및 압축응력 변화에 따른 PIN-PMN-PT 단결정의 유전 및 압전 특성
임재광,박재환,이정호,이상구 한국마이크로전자및패키징학회 2019 마이크로전자 및 패키징학회지 Vol.26 No.4
Dielectric and piezoelectric properties of PIN-PMN-PT piezoelectric single crystals with variation of temperature and compressive stress were investigated. The crystal phase of the single crystal was changed from the ferroelectric rhombohedral structure to tetragonal structure in the 110oC region and from the tetragonal structure to the paraelectric cubic structure in the 190oC region. The piezoelectric constant and relative dielectric constant were calculated from the rate of change of polarization and displacement with the application of electric field, which was similar to the value measured from the instrument. As the compressive stress applied to the sample increased, the piezoelectric constant d33 and relative dielectric constant values tended to increase. When the compressive stress applied to the sample at 5oC was 60 MPa, the d33 was calculated as 4,500 pC/N. At 60oC, the relative dielectric constant of 62000 was calculated when the compressive stress applied to the sample was 40 MPa. The increase in piezoelectric constant and relative dielectric constant when the compressive stress increased could be attributed to the phase transition from the rhombohedral structure to orthorhombic. 온도 및 압축응력 변화에 따른 PIN-PMN-PT계 압전 단결정의 유전 특성과 압전 특성을 조사하였다. 단결정의결정상은 110oC 영역에서 강유전 rhombohedral 구조에서 tetragonal 구조로, 190oC 영역에서 tetragonal 구조로부터 상유전 cubic 구조로 변화하였다. 전계 인가에 따른 분극 및 변위의 변화율로부터 압전상수와 비유전율을 계산하였으며, 이는계측기로부터 측정된 값과 유사한 수준을 나타내었다. 샘플에 인가되는 압축응력이 증가할수록 압전상수 d33과 비유전율값은 증가하는 경향성을 나타내었다. 측정 온도 5oC에서 샘플에 인가되는 압축응력이 60 MPa인 경우 d33 값이 4500 pC/ N로 계산되었으며, 측정 온도 60oC인 경우, 샘플에 인가되는 압축응력이 40 MPa 일 때 비유전율 62000이 계산되었다. 압축응력이 높아질 때 압전상수와 비유전율 값이 상승한 것은 rhombohedral 상에서 orthorhombic 상으로의 전이에 기인한 것으로 판단된다.
유착성 소장 폐색의 진단에서 이행부위와 유착의 발견: CT 단독 검사와 비교한 추가적인 초음파 검사의 유용성
임재광,김종열,김갑철,염헌규,정한영,이희중,박진영 대한초음파의학회 2009 ULTRASONOGRAPHY Vol.28 No.1
Purpose: We aimed to assess retrospectively the benefit of the use of ultrasonography(US) in comparison with the use of only CT imaging for the detection of the transition zone and adhesions to determine a diagnosis of adhesive small-bowel obstruction (SBO). Materials and Methods: Thirty-five patients underwent an additional US examination after CT imaging to determine a diagnosis of SBO. All of the patients were surgically confirmed as having adhesive SBO. The CT images were interpreted for the location of the transition zone, the location and shape of adhesions and for other SBO findings. All of the additional US scans were performed with reference to the CT findings. The standard of reference for the diagnosis was the surgical findings. The diagnostic accuracy and mean confidence score of the transition zone location and the detection rate of adhesions were evaluated for both CT imaging alone and for CT imaging with additional US. Results: The diagnostic accuracy to locate the transition zone was significantly increased with the use of additional US with CT imaging (94.6%, 33/35) as compared to 65.7% (23/35) with the use of only CT imaging (p = 0.01). The mean confidence score was significantly increased (by 0.95) with the use of an additional US examination (p < 0.01). The detection rate for adhesions was 20% (7/35) with the use of only CT imaging and the detection rate was 68.6% (24/35) with the use of an additional US examination. Conclusion: The use of a US examination in addition to CT imaging can increase the accuracy and confidence to locate the transition zone and can increase the rate to detect adhesions in patients with adhesive SBO. An additional US examination may be especially helpful when the CT findings are equivocal. 목적: 유착성 소장 폐색의 진단에서 이행부위와 유착을 발견하는 데에 있어 추가적인 초음파 검사의 유용성을 CT 단독 검사와 비교하여 후향적으로 평가하고자 하였다. 대상과 방법: 유착성 소장 폐색으로 CT 검사 후 초음파검사를 하고 수술하여 확진된 35명의 환자를 대상으로 하였다. CT는 이행부위의 위치, 유착의 위치와 모양, 기타 소장 폐색의 소견에 대해 판독하였다. 모든 추가적인 초음파검사는 CT 판독을 참고하여 시행하였다. 수술 소견을 표준으로 하였다. CT 단독 검사와 추가적인 초음파 검사에서 이행부위의 위치에 대한 진단정확도와 진단신뢰도, 유착의 발견률을 각각 조사하였다. 결과: 이행부위의 위치에 대한 진단정확도는 CT 단독 검사의 65.7% (23/35)에 비해 추가적인 초음파 시행 시에 94.3% (33/35)로 의미 있게 증가하였다 (p = 0.01). 진단신뢰도는 추가적인 초음파 검사에서 평균 0.95 높아졌으며 의미 있게 증가하였다 (p < 0.01). 유착의 발견률은 CT 단독 검사가 20% (7/35), 추가적인 초음파 검사가68.6% (24/35)였다. 결론: 유착성 소장 폐색 환자에서 추가적인 초음파 검사는 이행부위의 위치에 대한 진단정확도와 진단신뢰도, 유착의 발견률을 증가시킬 수 있으며 특히 CT 소견이 불명확한 경우 도움이 될 것으로 생각한다.
압축하중 및 전계 인가에 따른 PIN-PMN-PT 단결정의 33-모드 유전 및 압전특성
임재광,박재환,이정호,이상구,Lim, Jae Gwang,Park, Jae Hwan,Lee, Jeongho,Lee, Sang Goo 한국마이크로전자및패키징학회 2020 마이크로전자 및 패키징학회지 Vol.27 No.4
Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3계 압전 단결정의 유전특성과 압전특성을 전계 및 압축응력 인가 조건 하에서 33-모드 방식으로 측정하였다. 110~140℃ 영역에서 저온 rhombohedral 구조에서 고온 tetragonal 구조로의 상전이가 관찰되었으며, cubic 구조로 변화하는 큐리온도는 165℃ 정도로 나타났다. 압축응력 및 전계 변화에 따른 분극의 크기변화를 측정하였다. 전계인가 분극 곡선의 기울기로부터 비유전율을 계산하였고, 인가되는 응력의 크기가 증가할수록 계산된 비유전율의 크기는 증가하고, 인가되는 전계의 크기가 증가할수록 비유전율의 크기는 감소하는 경향성을 나타내었다. 압축응력 및 전계 변화에 따른 변위 거동을 측정하였으며, 곡선의 기울기로부터 압전상수를 계산하였고 압력인가에 따른 상전이를 확인하였다. 수중 또는 의료용 초음파 발진자로 실제 응용할 경우 선형성을 유지하여 구동이 가능하기 위하여 소자 기구물을 형성하는 단계에서 인가하게 되는 압축응력의 크기와 구동 전계의 DC 바이어스의 크기를 적절하게 설계할 필요가 있다. The 33-mode dielectric and piezoelectric properties of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 piezoelectric single crystals were measured under large electric field and compressive stress. The phase transition from the low temperature rhombohedral to the high temperature tetragonal structure was observed in the range of 110~140℃, and the Curie temperature changing to the cubic structure was about 165℃. The polarization change according to the compressive stress and electric field was measured. Relative dielectric constant was calculated from the slope of the polarization curve applied to the electric field, and the calculated relative dielectric constant increased as the applied stress increased, and the relative dielectric constant decreased as the applied electric field increased. The strain according to the compressive stress and electric field change was measured, the piezoelectric constant was calculated from the slope of the curve, and the phase transition according to the application of pressure was confirmed. In the case of practical application as an underwater or medical ultrasonic actuator, it is necessary to properly design the magnitude of the compressive stress applied to the device and the DC bias in order to maintain linear driving.
효율적인 유체 시뮬레이션을 위한 FLIP과 레벨셋의 적응형 혼합 기법
임재광(Jae-Gwang Lim),김봉준(Bong-Jun Kim),홍정모(Jeong-Mo Hong) 한국컴퓨터그래픽스학회 2013 컴퓨터그래픽스학회논문지 Vol.19 No.3
FLIP 기반의 유체 시뮬레이션은 품질에 대비 높은 효율을 자랑하기 때문에 Visual Effect(VFX)산업에 널리 사용되고 있다. FLIP 기술에서는 바다와 같은 대규모의 물을 시뮬레이션 할 때 시각적으로 중요하지 않은 물의 안쪽까지도 파티클을 할당해야 하기 때문에 보이는 파티클보다 보이지 않는 파티클의 개수가 훨씬 많은 경우에는 시뮬레이션 작업의 효율성이 떨어진다. 본 논문에서는 이러한 단점을 보완하기 위하여 레벨셋(Level Set)과 Fluid Implicit Particle(FLIP) 기반의 유체 시뮬레이션 기법을 혼합(hybrid)한 효율적인 유체 시뮬레이션 기법을 제안한다. 파티클들을 물의 안쪽 표면 근처의 얇은 층에만 배치함으로써 사용되는 파티클의 갯수를 줄여서 결과적으로 시뮬레이션의 효율성을 크게 높일 수 있었다. 또한 [1]의 표면 재구성 기법과 moving least squares(MLS) [2] 기법을 결합한 새로운 유체 표면 재구성 기법을 적용하여 FLIP을통해 격자(Grid)기반시뮬레이션에서 발생하는 수치적 소실을 줄이고 동시에 유체의 부드러운 표면을 유지할 수 있다. 본 논문의 혼합시뮬레이션 기술은 높은 품질의 유체 시뮬레이션을 효율적으로 수행하여 다양한 규모의 유체를 표현할 수 있었다. Fluid Implicit Particle (FLIP) method is used in Visual Effect(VFX) industries frequently because FLIP based simulation show high performance with good visual quality. However in large-scale fluid simulations, the efficiency of FLIP method is low because it requires many particles to represent large volume of water. In this papers, we propose a novel hybrid method of simulating fluids to supplement this drawback. To improve the performance of the FLIP method by reducing the number of particles, particles are deployed inside thin layers of the inner surface of water volume only. The coupling between less-disspative solutions of FLIP method and viscosity solution of levelset method is achieved by introducing a new surface reconstruction method motivated by surface reconstruction method[1] and moving least squares(MLS) method[2]. Our hybrid method can generate high quality of water simulations efficiently with various multiscale features.
FDM 3D 프린팅을 위한 Perlin 노이즈 기반 사전 시각화 기법
임재광(Jae-Gwang Lim),장승호(Seung-Ho Jang),홍정모(Jeong-Mo Hong) (사)한국CDE학회 2016 한국CDE학회 논문집 Vol.21 No.3
We propose a new method to visualize 3D models for FDM (Fused Deposition. Modeling) printing that appearance of the printed results can be predicted more realistically as that the efficiency of the modeling-printing process can be improved. The layered nature of horizontal slicing and the vibratory nozzle movements of customer-level FDM 3D printers leaving the characteristic patterns of noisy stripes on the surfaces of printed objects make difficulties in prediction of printed result in company with the thermal contraction of filament material. First, our method analyses the G-codes generated by common slicers to obtain proper outlines and take advantages of a modified version of Perlin noise based texturing method for rendering efficiency and enough number of control parameters on the visual details. The results show improved rendering details of pre-visualization of FDM printing.
TP-75 : Thematic Poster ; Clinical Significance of Ground Glass Opacity in Miliary Tuberculosis
최금주,임재광,이소연,유승수,이재희,이신엽,차승익,박재용,김창호 대한결핵 및 호흡기학회 2013 대한결핵 및 호흡기학회 추계학술대회 초록집 Vol.116 No.-
Objective: After the application of chest computed tomography (CT), ground glass opacity (GGO) was introduced as one of major accompanying findings of miliary tuberculosis (MT). However, little is known about whether GGO is associated with the clinical manifestations and outcomes of MT. Therefore, the present study examined the clinical significance of GGO in patients with MT. Methods: Chest radiographs and CT scans of MT patients were retrospectively reviewed. Clinical manifestations and outcomes were compared in terms of the extent of GGO revealed by CT. Results: One hundred and eleven MT patients were included. GGO was observed in 76 (68%) patients. MT patients with an extent of GGO >50% (n=23) had symptoms of shorter duration, more frequent dyspnea, and more pronounced changes in the levels of acute phase reactants. Miliary nodules were less discernible on CT in those with an extent of GGO >50%. MT patients with an extent of GGO >50% was significantly associated with a longer hospital stay (p=0.01) and with acute respiratory failure (p=0.001). Conclusions: MT patients with an extent of GGO >50% had more rapidly progressive manifestations and a greater potential for delayed diagnosis and poorer prognosis. Objective: After the application of chest computed tomography (CT), ground glass opacity (GGO) was introduced as one of major accompanying findings of miliary tuberculosis (MT). However, little is known about whether GGO is associated with the clinical manifestations and outcomes of MT. Therefore, the present study examined the clinical significance of GGO in patients with MT. Methods: Chest radiographs and CT scans of MT patients were retrospectively reviewed. Clinical manifestations and outcomes were compared in terms of the extent of GGO revealed by CT. Results: One hundred and eleven MT patients were included. GGO was observed in 76 (68%) patients. MT patients with an extent of GGO >50% (n=23) had symptoms of shorter duration, more frequent dyspnea, and more pronounced changes in the levels of acute phase reactants. Miliary nodules were less discernible on CT in those with an extent of GGO >50%. MT patients with an extent of GGO >50% was significantly associated with a longer hospital stay (p=0.01) and with acute respiratory failure (p=0.001). Conclusions: MT patients with an extent of GGO >50% had more rapidly progressive manifestations and a greater potential for delayed diagnosis and poorer prognosis.
이재희,임재광,이소연,유승수,이신엽,차승익,박재용,김창호 대한결핵 및 호흡기학회 2015 대한결핵 및 호흡기학회 추계학술대회 초록집 Vol.120 No.0
Objectives: There exists neutrophilic loculated type of tuberculous pleural effusion (TPE), although TPE is generally characterized by lymphocytic exudative effusion, regardless of whether it is free-flowing or loculated. However, little data is available concerning the incidence and characteristics of neutrophilic loculated TPE. The present study evaluated the incidence andcharacteristics of neutrophilic loculated TPEs and differentiated them from complicated PPE. Methods: Between 2009 and 2014, a cohort of patients with TPE was retrospectively reviewed in a South Korean referral hospital. Clinical, laboratory, computed tomography, and pleural fluid findings of neutrophilic loculated TPE patients were compared to those of patients with neutrophilic free-flowing TPE and complicated PPE, respectively. Results: Neutrophilic TPE was observed in 33 (10%) out of 344 TPE patients. Of them, 10 (30%) exhibited loculation of the pleural fluid. These neutrophilic loculated TPE patients showed distinct pleural fluid characteristics. The classical pleural fluid biomarker levels were more intense than those observed in 23 neutrophilic free-flowing TPE patients, but similar to those of 54 complicated PPE patients. Nodular parenchymal lesions and pleural fluid adenosine deaminase levels were independent discriminators of neutrophilic loculated TPE and PPE. Conclusions: These results may be helpful to understand and manage patients with neutrophilic loculated TPE with differentiation from complicated PPE.
류민중,임재광,이호석 대한영상의학회 2020 대한영상의학회지 Vol.81 No.4
Brachiocephalic venous aneurysm (BVA) development is an extremely rare, particularly as a primary vascular disorder. BVAs may be misinterpreted as lymphadenopathies owing to the variable degrees of enhancement seen in imaging studies, especially among patients with underlying malignancy. We report a BVA that mimicked lymph node metastasis on CT in a 60-year-old female who had undergone subtotal gastrectomy for stomach cancer. After followup chest CT with different bolus times and Doppler ultrasonography, a venous aneurysm originating from the brachiocephalic vein was diagnosed. We emphasize that, to make an accurate diagnosis, physicians should be aware of the potential diagnostic pitfalls and have a high index of suspicion for BVA when encountering certain lesions in the cervical area.