http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 임승하 (검색결과 37 건)
- 무료
- 기관 내 무료
- 유료
-
-
-
임승하,사공석진 대한전자공학회 1996 전자공학회논문지-B Vol.b33 No.11
For the decreasing of switching loss, this paper designs the improved buck converter circuit and then compare with the conventional buck converter and finally analyzes the performance. When the switch is turn-off, in the buck converter using the smoothing capacitor, the flow of transient current and peak voltage having the high frequency components was generated because of the instantaneous open-state in the teminals of the switch. However, the buck converter presented in this paper eliminated this disadvantage by using the L-C circuit. Therefore, the higher PF in 0.85 is achieved than that of the buck converter using the smoothing capacitor. Also, due to the decreasing of the harmonic contain rate, the current usage rate is to be higher than that of the conventional buck converter by 4.48dB and the output voltage varient rate for the step response is to be lower 1.32 times than that of the conventional buck converter.
-
임승하 대한전자공학회 1999 電子工學會論文誌-T Vol.t36 No.3
In this paper, we realize the active PFC(Power Factor Correction) system of BF (Boost Forward) converter with PWM-PFM control technique to control DC output voltage, and to control the input current with sinusoidal wave synchronized by the converter and inverter using power switching element, FET and IGBT. The control circuit of the suggested Boost converter is implemented with a microprocessor 80C196. After making the ratio of output voltage to current as 50V/1A and the duty ratio greater than 0.5. When input voltage is 30V and boost inductance is 1.1mH. We control the voltage changing rate according to the variation of load resistance using a PWM-PFM control technique. And finally we prove experimentally. PF can be improved up to 0.96 using the current shaping technique. 본 논문에서는 BF 컨버터의 Active PFC 시스템을 구성하고, 전력 변환시 입력 전류를 전원 전압과 동상인 정현파로 제어하며 직류 출력 전압을 제어하기 위한 PWM-PFM 제어 기법을 사용하여 역률을 개선하였다. FET와 IGBT를 이용하여 본 논문에서 제시한 Boost 컨버터와 인버터 회로를 구성하였고, 제안된 Boost 컨버터의 제어 회로는 마이크로프로세서 80C196으로 구성하였다. 또한 입력 전압이 30V이고, Boost 인덕터가 1.1 mH일 때 정격 출력은 전압 50V, 전류 IA, 듀티비 (Duty Ratio) 0.5 이상으로 하였다. 부하 저항의 변화에 따른 전압 변화를 PWM-PFM 제어 기법을 이용하여 제어하였고, 전류 성형 기법을 이용하여 역률이 0.96 가지 개선됨을 실험으로써 입증하였다.
-
MPC SYSTEM의 MPC LEVEL -Ⅰ SOUNG 구성에 관한 연구
임승하 부천대학 1993 論文集 Vol.14 No.-
This paper attempts the experiment of the configuration of H/W on Multimedia Sound which is focussing on MPC Level I. It shows more improved data, as a result of the experiment, than the value of the traditional MPC Sound. When the synchronization of sound considered the data by the Logic Analyzer in case of video decoding. Only if, When audio synchronization is done while video on the CD is being displayed, each Sync. does not show synchronized. In order to avoid this problem, Sync. signal is synchronized with Audio signal, and the progressive will be done in the near future for the completely synchronization of video and audio. Since the quality of Sound is similar to CD quality, sound of good quality is generated, and hereafter, MPC made a contribution toward profit of economic and developement of technic using a field of industry.
-
임승하 부천대학 1994 論文集 Vol.15 No.-
This paper is designed to secure the competitiveness of the basic technology for the development and production of picture processing process in the future market of multimedia. To achieve this object, we propose the motion picture compensator of the motion picture process decoder, which is designed to support the MPEG. The motion picture compensator, which is designed in this study, is not perfect, but pin and block were defined for basic motion. therefore, the motion picture compensator can be applicated in encoder through a little modification.
-
-
임승하 대한전자공학회 2007 電子工學會論文誌 IE (Industry electronics) Vol.44 No.4
The Channel environment is poor in the power line communication because power line proposed power supply use a communication medium. In this paper, we designed gate drive circuit used coupler reducing the signal diminution for the good communication. We analyzed receiving and transmitting operation of the coupler and designed the drive circuit with the suitable impedance. As a result, we improved the environment of impedance variation due to the inter reaction of many electron products. So, to improve BER(45%) enabled us to communicate smoothly in power line communication. 전력선 통신에서는 전력을 공급하기 위해 설치된 전력선을 통신 매체로 사용하기 때문에 채널 환경이 열악하다고 할 수 있다. 본 논문에서는 원활한 통신을 위해 신호 감쇠를 저감하는 결합기를 적용한 gate 구동회로를 설계하였다. 결합기의 수신 동작과 송신 동작을 등가회로 해석하여 구동회로에 적합한 임피던스를 갖도록 설계하였다. 그 결과 전력선에 연결된 수 많은 전자 제품들의 상호 작용으로 인한 임피던스 변화에 대한 환경을 개선하여 전력선 통신에서의 BER(Bit Error Rate)을 45% 향상하여 더 원활한 통신을 할 수 있도록 하였다.
-
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
