http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임경은(Gyeong-Eun Lim),정진우(Jin-Woo Jeong) 한국HCI학회 2020 한국HCI학회 학술대회 Vol.2020 No.2
한국 도서 시장은 꾸준한 발전과 변화가 일어나는 중이며 새로운 경향을 가진 다양한 작품들이 출판되고 있다. 이렇게 증가하는 도서 시장에서 효율적인 도서장르 분류의 필요성은 더욱 증가하고 있다. 본 논문에서는 도서 장르 문제를 해결하기 위하여 국내 도서 표지를 기반으로 ImageNet 사전학습 된 VGG19 모델에 전이 학습 기법을 적용하여 도서 장르를 분류하는 방법을 제안한다. 본 논문에서는 9,963 장의 도서 표지 이미지를 대상으로 CNN 모델과 VGG transfer learning 모델의 도서 분류 성능 평가를 수행하였다. 실험 결과, 5 클래스 분류에서는 CNN 모델에 비해 VGG transfer learning 모델이 약 20.04% 높은 성능을 나타냈으며, 10 클래스 분류 문제에서도 12.36% 높은 성능을 나타낸 것을 확인하였다.
Modified Chloroprene Rubber를 이용한 Primer 제조 및 특성평가
임경은 ( Gyeong Eun Lim ),정부영 ( Boo Young Jeong ),천정미 ( Jung Mi Cheon ),최민지 ( Min Ji Choi ),천제환 ( Jae Hwan Chun ) 한국접착및계면학회 2018 접착 및 계면 Vol.19 No.1
본 연구에서는 부착력 향상 및 모바일 기기용 toluene-free 프라이머를 제조하기 위해 클로로프렌 고무 (CR)에 실리카 나노입자를 분산시켜 CR/silica 복합체를 제조하였다. CR/silica 복합체는 FT-IR, SEM, EDS 등을 이용하여 물성을 평가하였다. SEM을 통해 실리카 나노입자의 함량이 4 phr일때 가장 균일하게 분산되어 있는 것을 확인하였다. 접촉각과 연필경도측정을 통해 실리카 함량이 증가할수록 소수성을 띠는 것과, 연필경도가 증가함을 나타내었다. 부착력 결과 역시 실리카 함량이 4phr일때 가장 높았으며, 실리카가 함유되지 않은 P-0에 비해 50% 증가함을 확인하였다. Water In this study, CR/silica nanocomposites were produced by dispersing nanosilica on chloroprene rubber (CR) to apply toluene-free primers for mobile devices. The properties of the modified chloroprene rubber using nanosilica was evaluated through FT-IR, SEM, EDS, Contact angle. The SEM images indicated that P-4 (4 phr) was the most homogenously dispersed. Pencil hardness measurements and Contact angle indicated that the hardness of the CR/silica nanocomposite and the hydrophobicity increased with increase in the silica content. The peel strength of P-4 (4phr) was the highest and the initial peel strength of P-4 sample (2.9 kg<sub>f</sub>/inch) was 50% higher than that of the P-0 sample.
Benzo[1,2,5]thiadiazole을 기본 골격으로 한 공액고분자의 합성 및 광전변환특성 연구
배준휘 ( Jun Huei Bea ),임경은 ( Gyeong Eun Lim ),김주현 ( Joo Hyun Kim ) 한국공업화학회 2013 공업화학 Vol.24 No.4
Alternating copolymers, poly[9-(2-octyl-dodecyl)-9H-carbazole-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PCD20TBT) and poly[9,10-bis-(2-octyl-dodecyloxy)-phenanthrene-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PN40TBT), were synthesized by the Suzuki coupling reaction. The copolymers were soluble in common organic solvents such as chloroform, chlorobenzene, 1,2-dichlorobenzene, tetrahydrofuran and toluene. The maximum absorption wavelength and the band gap of PCD20TBT were 535 nm and 1.75 eV, respectively. The maximum absorption wavelength and the band gap of PN40TBT were 560 nm and 1.97 eV, respectively. The HOMO and the LUMO energy level of PCD20TBT were -5.11 eV and -3.36 eV, respectively. As for PN40TBT, the HOMO and the LUMO energy level of PCD20TBT were -5.31 eV and -3.34 eV, respectively. The polymer solar cells (PSCs) based on the blend of copolymer and PCBM (1 : 2 by weight ratio) were fabricated. The power conversion efficiencies of PSCs based on PCD20TBT and PN40TBT were 0.52% and 0.60%, respectively. The short circuit current density (JSC), fill factor (FF) and open circuit voltage (VOC) of the device with PCD20TBT were -1.97 mA/cm 2, 38.2% and 0.69 V. For PN40TBT, the JSC, FF, and VOC were -1.77 mA/cm 2, 42.9%, and 0.79 V, respectively.
Allyl 3-(trimethoxy silyl)propyl ether를 이용한 수성 폴리우레탄 아크릴레이트 실란의 합성 및 물성 연구
박큰별(Kuenbyeol Park),천정미(Jung Mi Cheon),정부영(Boo Young Jeong),정일두(Ildoo Chung),최민지(Min Ji Choi),임경은(Gyeong Eun Lim),천제환(Jae Hwan Chun) 한국고분자학회 2018 폴리머 Vol.42 No.3
수성접착제의 접착특성을 향상시키기 위하여 allyl 3-(trimethoxy silyl)propyl ether(ATSE)를 합성하고 이를 waterborne polyurethane acrylate에 적용하여 접착제를 제조하였다. FTIR과 ¹H NMR을 사용하여 ATSE의 합성을 확인하였다. 또한 FTIR을 통해 수성 폴리우레탄 아크릴레이트 실란(WPAS)의 합성을 확인하였고 DSC와 TGA를 사용하여 WPAS의 열적특성을 확인하였다. DSC와 TGA 분석을 통하여 ATSE의 함량이 증가할수록 soft segment의 열용량이 감소하고, 열안정성이 향상되는 것을 확인하였다. 또한 ATSE 함량에 따른 접착특성을 평가한 결과, ATSE 의 함량이 2.91 wt%일 때에 상태접착력 및 내수성이 가장 우수하였다. In order to improve adhesion properties and water resistance of waterborne polyurethane adhesives, allyl 3-(trimethoxy silyl)propyl ether (ATSE) was prepared. Waterborne polyurethane acrylate silanes (WPAS) was synthesized using ATSE. Their chemical structures were confirmed by FTIR and ¹H NMR, and their thermal properties were characterized by DSC and TGA. Analyses of DSC and TGA confirmed that heat capacity of soft segment decreased and thermal stability improved with increasing ATSE. Also, adhesion properties and water resistance were evaluated by UTM. In the adhesion properties and water resistance test, the maximum values were obtained by WPAS containing 2.91 wt% ATSE.