http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
$Li_2O-Al_2O_3-Ta_2O_5$ 삼성분계에 있어 $LiTaO_3$ 고용체의 구조 및 특성에 관한 연구
김정돈,흥국선,주기태 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.4
The partial substitution of LiTaO3 with Al2O3 caused the variation of dielectric properties and a lower melting temperature yielding an easier growth of single crystal. The lattice constants and Raman band broadening were measured for the LiTaO3 solid solution in which the cations of Li+ and Ta5+ were partially substituted by Al3+ cation. The LiTaO3 type limit phases were obtained. ; Li1.15Al0.45Ta0.7O3 for cationic excess Li1.15Al0.45Ta0.7O3 for stoichiometry Li0.85Al0.05TaO3 for cationic deficit. The second phase was formed beyond the solubility limit. The limit phase (Li0.85Al0.05TaO3) in the region of cationic deficit showed the lowest Cuire temperature of 61$0^{\circ}C$ and melting point of 152$0^{\circ}C$ compared to the solid solutions in other regions (TMp=1$650^{\circ}C$, Tc=69$0^{\circ}C$ for LiTaO3)
$Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$ 계 완화형 강유전체의 특성에 미치는 $PbTiO_3$ 첨가량의 변화 -I.유전특성 및 초전특성-
박재환,흥국선,박순자 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.4
PMN계에서 유전적 성질에 관한 연구들은 광범위하게 이루어져 왔으나 전계인가 변위특성에 관한 폭넓은 연구는 매우 드물다. 본 연구에서는 완화형 강유전체의 가장 대표적인 PMN계에서 PT의 함량 및 측정 온도의 변화에 따른 유전적 성질 및 전계인가 변위특성을 광범위하게 조사하는 것을 목표로 하고 있다. 전형적인 columbite precur-sor법에 의해 분말을 준비하고 고상소결방법에 의하여 모든 시편을 제조하였다. PT의 함량이 증가하면서 직선적으로 (T$\varepsilon$max)가 증가하였으며 유전율은 13000~22000 사이의 값을 보였다. 유전율의 온도 의존성은 PMN의 경우 전형적인 완화형 강유전체의 유전 특성을 보이지만 PT의 함량이 증가될수록 보통 강유전체의 sharp한 거동을 보였다. 전계인가 변위특성에서는 단순히 유전율이 최대가 되는 온도에서 발생 strain이 최대가 되는 것은 아니며 tetragonal-cubic의 phase transition에서는 strain의 증가가 없고 rhombohedral에서 tetragonal 혹은 rhombohed-ral에서 cubic으로의 상전이에서만 strain이 크게 나타남을 알 수 있었다. In order to understand the electrostrictive behavior of Pb(Mg1/3Nb2/3)O3-PbTiO3(PMN-PT) solid solutions the dielectric constants and the electric-field-induced strains in (1-x)PMN-xPT (x=0.0-0.4) were investigated in the temperature range -5$0^{\circ}C$-20$0^{\circ}C$. Powder of (1-x)Pb(Mg2/3Nb2/3)O3-xPbTiO3 (x=0.0, 0.1, 0.2, 0.3, 0.35, and 0.4) were prepared from the oxide forms of Pb, Mg, Nb and Ti via a columbite precursor method As the amount of PbTiO3 increases the temperature of maximum dielectric constant(T$\varepsilon$max) increases and the phase transition become less diffusive. The strain maximum occurs only when the diffuse phase transition occurs from rhombohedral to cubic or rhombohedral to tetragonal as in x=0.1-0.35 The strains monotonically decrease with temperature in the materials in which phase transition occurs from tetragonal to cubic as in x=0.4.
$Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$계 완화형 강유전체의 특성에 미치는 PbTiO3 첨가량의 영향 -II. 상전이 및 전계인가 변위특성-
박재환,김인태,김동영,조서용,흥국선,박순자 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.5
In order to understand the electrostrictive behavior of Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) solid solutions the dielectric constants the electric-field-induced strains and the pyroelectric coefficients of (1-x)PMN-xPT (x=0.1-0.4) were investigated in the temperature range -50~20$0^{\circ}C$. For x=0.1~0.35 where the phase transi-tion is diffusive the strain has a maxima at the temperature of maximum pyroelectric coefficient (depolrizing temperature) rather than the temperature of maximum dielectric constant. For x=0.4 where the phase transition is relatively sharp the strain decreases monotonically as the temperature increases. Relationships among the above experimental results are discussed.
디스턴스 마스크를 이용한 겹친 세포핵들에 대한 분리방법 구현
최흥국,허민권,서재현 인제대학교기초과학연구소 1998 자연과학 Vol.2 No.-
영상처리에서 이미지에 대한 분할은 가장 필수적인 조건이다. 특히 의료세포영상과 같은 복잡한 영상들에 대한 분할은 더더욱 어렵다. 또 세포를 정확히 분할을 하더라도 의료세포영상은 세포들간의 중복(겹침)현상이 두드러지게 나타난다. 이러한 겹침 현상은 일정한 것이 아니라 서로 다른 형태와 크기와 모양으로 생긴다. 이러한 특징들을 다 만족하여 분할하기는 많은 노력이 필요하다. 본 논문에서는 특히 병리학분야에서 세포 분석의 중요한 요소를 들고 있는 세포수에 의한 영상분석을 하기 위해 어렵고 복잡한 것이 아니라 유클리디안 디스턴스를 이용한 회선 마스크를 사용하여 간단히 겹침 현상 세포를 셀 수 있는 방법을 제안한다. Image segmentation is important in image processing. Particularly, it is difficult to segment complex image like medical cell tissue image. Although cells are exactly separated, the overlapping cell nuclei with different type, size, and shape appear. In this paper, we present the method using convolution mask based on Euclidean distance to count overlapping cell nuclei simply.
오흥국,연규현,김태훈 韓國工作機械學會 2000 한국생산제조학회지 Vol.9 No.4
The reorientations of the atoms by frictional shear deformation at the surface induce cracks at the boundary of the grain. The cracks grow and propagate in regions where the hydrostatic component of stress is least com-pressive because the compressive component restores the cracks by three-dimensional crystallizing π-bondings. The materials, with Luder's band have very small amount of wear at the initial state. It suggests that initial frictional shear deformation be consumed to the formation of the Luder's band. The average wear amounts of the materials increase very steeply as the ø_u, the stress-strain ratio at the ultimate point, decreases.
이흥국(H.G. Lee),유송민(S.M. Yoo),이위로(W.R. Lee),이동규(D.K. Lee),노대호(D.H. Ro),박환서(H.S. Park) 한국생산제조학회 2005 한국공작기계학회 추계학술대회논문집 Vol.2005 No.-
The purpose of this study is to introduce the standard of the Performance and evaluation method for Multi Ball Bearing Slide Rail. The major evaluation criteria include deformation (for durability test). Due to the difficulties in assessing the deformation of each slides directly, performance of the whole rail was analized. From finite element analsys and beam theroy, deformation of the multi ball bearing slide rail was evaluated. The evaluation method is shown for the performance of the static deformation and pulling force of the Multi Ball Bearing Slide Rail.