http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고강도 재료를 사용한 철근콘크리트 보 단면의 곡률연성지수 예측
이형준,Lee, Hyung Joon 대한토목학회 2013 대한토목학회논문집 Vol.33 No.2
콘크리트 구조물의 대형화에 따라 고강도를 갖는 재료가 최근에 많이 사용되고 있는 추세이다. 고강도 재료의 사용은 역학적 성질 또는 내구성에 있어서는 장점이 있으나 구조물의 연성 거동에는 불리한 것으로 알려져 있다. 철근콘크리트 부재는 강도뿐만 아니라 적절한 연성이 확보되도록 설계가 되어야 하기 때문에 철근콘크리트 보의 연성을 적절하게 평가할 수 있어야 한다. 본 연구에서는 고강도 재료를 사용한 철근콘크리트 보부재의 곡률연성지수의 예측식을 제시하고자 하였다. 이를 위하여 고강도 콘크리트 및 철근을 사용한 직사각형 단면 RC 보의 모멘트-곡률 관계를 해석적 방법으로 계산하여 다양한 철근 배치 조건하에서 콘크리트 및 철근의 강도가 부재의 휨거동 및 곡률연성지수에 미치는 영향을 분석하였고, 단철근 및 복철근 보에 모두 적용할 수 있는 극한상태에서의 압축철근의 응력을 고려한 새로운 곡률연성지수 예측식을 도출하였다. 제안한 곡률연성지수 예측식은 기존의 식과 비교분석하였으며, 단철근 및 복철근 보에서 예측식에 의해 계산된 곡률연성지수는 수치해석에 의해 얻은 곡률연성지수 값을 오차 범위 9% 내에서 예측하는 것으로 나타났다. The high strength materials have been more widely used in a large reinforced concrete structures. It is known that the use of high strength material in RC structures give the benefits of the mechanical and durable properties, but the ductility decreases with an increase in the strength of the materials. In the design of a reinforced concrete beam, both the flexural strength and ductility need to be considered. So, it is necessary to assess accurately the ductility of the beam with high strength materials in order to ensure the ductility requirement in design. In this study, the effects of the material strength on the flexural behavior and curvature ductility factor of reinforcement concrete beam sections with various reinforcement conditions have been evaluated and a newly prediction formula for curvature ductility factor of RC beam has been developed considering the stress of compression reinforcement at ultimate state. The proposed predictions for the curvature ductility factor which is applicable to both singly and doubly reinforced concrete beam are verified by comparisons with other prediction formulas and the proposed formula offers fairly accurate within 9% error and consistent predictions for curvature ductility factor of reinforced concrete beam.
이형준(Lee, Hyung-Joon) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.12
콘크리트 구조물이 대형화됨에 따라 고교각, 장지간의 보 등 부재가 장대화되고 있으며, 장지간의 철근콘크리트 부재에서는 자중을 줄이고 강성을 증가시키기 위해 속빈 단면을 사용하는 것이 증가하는 추세이다. 본 연구에서는 철근콘 크리트 속빈 단면 보의 모멘트-곡률 관계를 해석적 방법으로 구하여 속빈 부분의 크기, 상부플랜지와 복부의 철근 배치조 건이 부재의 휨거동 및 곡률연성지수에 미치는 영향을 분석하였다. 속빈 부분의 크기(bi/bo 또는 hi/ho)가 0.5이하일 때에는 곡률연성지수가 일정하게 유지되며, 0.7이상이 되면 곡률연성지수가 급격히 감소하였다. 또한, 복부에 철근을 배치하면 곡률연성지수가 감소하며 단철근 보에서와 같은 수준의 연성지수를 얻기 위해서는 복부에 배치한 철근과 같은 양을 상부 플랜지에 배치해야 하는 것으로 나타났다. In highly elevated piers and long span beams, a hollow section is often used to reduce the self-weight and increase the flexural rigidity of members. Numerical analysis was conducted to obtain the moment-curvature curves and curvature ductility factor for the RC hollow section beams under a range of hollow portion sizes and reinforcement conditions in the upper flange and web. The curvature ductility factor was constantly maintained until the hollow portion size(bi/bo/ hi/ho) was less than or equal to 0.5. The curvature ductility factor decreased sharply if (bi/bo/ hi/ho) was 0.7 or more. The curvature ductility factor of the beam decreased if reinforcement was provided in the web of the RC hollow section beam. To obtain the same level of the ductility factor as the singly reinforced section, the reinforcement should be provided in the upper flange as much as the web reinforcement.
이형준 ( Hyung-joon Lee ),변정용 ( Jeong-yong Byun ) 한국정보처리학회 2012 한국정보처리학회 학술대회논문집 Vol.19 No.2
웹상의 다양한 문서들 가운데 옛한글 문서는 물론 정확한 외국어 음차표기를 위하여 초성, 중성, 종성자가 2, 3자 합자병서하여 현대 한글의 범위를 넘어서는 음절을 표현하고 검색하는 방법이 요구되고 있다. 이러한 요구를 해결하기 위하여 훈민정음 창제원리에 따른 399억 음절을 표현하고 및 운영 체제에 독립적으로 보다 쉽게 설치할 수 있는 자바스크립트로 된 웹기반 정음 입력기를 개발한다.