http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
MRI와 동시에 측정한 뇌전도 신호로 전류원 국지화를 할 때 경사자계 유발 잡음의 영향 분석
이항로,한재용,조민형,임창환,정현교,이수열,Lee H. R.,Han J. Y.,Cho M. H.,Im C. H.,Jung H. K.,Lee S. Y. 대한자기공명의과학회 2003 Investigative Magnetic Resonance Imaging Vol.7 No.2
목적 : MRI를 촬영하면서 동시에 측정한 뇌전도 신호에 가장 크게 영향을 미치는 것은 경사자계 유발 잡음이다. MRI와 동시에 측정한 뇌전도 신호에서 전류원 국지화를 수행할 때, 경사자계 유발 잡음이 미치는 영향을 분석하고자 한다. 대상 및 방법 : 사람의 머리와 유사하게 만든 뇌전도 팬텀과 MR compatible 뇌전도 측정시스템, 그리고 3.0 Tesla MRI 시스템을 실험에 사용하였다. 3.0 Tesla MRI 시스템 안에 전류원이 설치되어 있는 뇌전도 팬텀을 놓고, EPI 촬영을 하는 동안 뇌전도 신호를 측정하였다. 경사자계의 세기와 전류원의 위치를 조절하면서 뇌전도 신호 측정을 하였고, 측정된 뇌전도 신호에 대하여 전류원 국지화를 수행할 때 나타나는 국지화 오차를 평가하였다. 결과 : 경사자계 유발잡음에 의한 국지화 오차는 경사자계의 세기와 전류원의 위치에 따라 변화하는 것을 관찰하였다. 또한 경사자계 유발잡음이 Gaussian 잡음보다 전류원 국지화에 미치는 영향이 큰 것을 관찰하였으며, 경사자계 유발 잡음의 전력이 뇌전도 신호 전력의 $10\%$ 이하일 때는 전류원 국지화에 미치는 영향이 미미함을 관찰하였다. 결론 : 경사자계 유발 잡음 전력을 뇌전도 신호 전력의 $10\%$ 이하로 줄인다면 MRI를 하면서 동시에 측정한 뇌전도 신호로도 전류원 국지화를 할 수 있음을 알 수 있었다. Purpose : To evaluate the effect of the gradient switching noise on the ECD source localization with the EEG data recorded during the MRI scan. Materials and Methods : We have fabricated a spherical EEG phantom that emulates a human head on which multiple electrodes are attached. Inside the phantom, electric current dipole(ECD) sources are located to evaluate the source localization error. The EEG phantom was placed in the center of the whole-body 3.0 Tesla MRI magnet, and a sinusoidal current was fed to the ECD sources. With an MRI-compatible EEG measurement system, we recorded the multi channel electric potential signals during gradient echo single-shot EPI scans. To evaluate the effect of the gradient switching noise on the ECD source localization, we controlled the gradient noise level by changing the FOV of the EPI scan. With the measured potential signals, we have performed the ECD source localization. Results : The source localization error depends on the gradient switching noise level and the ECD source position. The gradient switching noise has much bigger negative effects on the source localization than the Gaussian noise. We have found that the ECD source localization works reasonably when the gradient switching noise power is smaller than $10\%$ of the EEG signal power. Conclusion : We think that the results of the present study can be used as a guideline to determine the degree of gradient switching noise suppression in EEG when the EEG data are to be used to enhance the performance of fMRI.
ESPI와 음향공진법을 이용한 Foil 재료의 동적탄성계수 측정
이항서(H. S. Lee),김경석(K. S. Kim),강기수(K. S. Kang),AKHLAQ AHMAD 한국정밀공학회 2005 한국정밀공학회 학술발표대회 논문집 Vol.2005 No.10월
The paper proposes a new sonic resonance test for a dynamic elastic constant measurement which is based on time-average electronic speckle pattern interferometry(TA-ESPI)and Euler-Bernoulli equation. Previous measurement technique of dynamic elastic constant has the limitation of application for thin film or polymer material because contact to specimen affects the result. TA-ESPI has been developed as a non-contact optical measurement technique which can visualize resonance vibration mode shapes with whole-field. The maximum vibration amplitude at each vibration mode shape is a clue to find the resonance frequencies. The dynamic elastic constant of test material can be easily estimated from Euler-Bernoulli equation using the measured resonance frequencies. The TA-ESPI dynamic elastic constant measurement technique is able to give high accurate elastic modulus of materials through a simple experiment and analysis.
레이저 스페클간섭법에 의한 STS430의 열팽창계수 측정
김경석(K.S. Kim),이항서(H.S. Lee),정현철(H.C. Jeong),양승필(S.P. Yang) 한국정밀공학회 2004 한국정밀공학회 학술발표대회 논문집 Vol.2004 No.10월
This paper presents ESPI system for the measurement of thermal expansion coefficient of STS430 up to 1,000℃ Existing methods, strain gauge and moire have the limitation of contact to object and do not supply the coefficient up to 800℃ There needs to measure the data up to 800℃ because heat resistant materials have high melting temperature up to 1,000℃ In previous studies related to thermal strain analysis, the quantitative results are not reported by ESPI at high temperature, yet. In-plane ESPI and vacuum chamber for the reduction of air turbulence and oxidation are designed for the measurement of the coefficient up to 1,000℃ and speckle correlation fringe pattern images are processed by commercial image filtering tool-smoothing, thinning and enhancement- to obtain quantitative results, which is compared with references data. The comparison shows two data are agreed within 4.1% blow 600℃ however, there is some difference up to 600℃ Also, the incremental ratio of the coefficient is changed up to 800℃ The reason is the phase transformation of STS430 probably begins at 800℃.
터보펌프 터빈의 열구조적 적합성 검증을 위한 터빈로터-파이로시동기 연계시험
정은환(E.H Jeong),강상훈(S.H. Kang),홍문근(M.G. Hong),이항기(H.G. Lee),이수용(S.Y. Lee),김진한(J.H. Kim) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
터보펌프 터빈로터의 열구조적 적합성 검증을 위한 터빈로터-파이로시동기 연계시험을 수행하였다. 새로운 추진제를 적용한 파이로시동기, 그리고 열응력 경감 설계와 터빈 동익 표면 건전성 향상을 위한 후가공 공정을 적용한 터빈로터시편이 시험에 사용되었다. 75톤급 엔진시동을 위한 파이로 시동기의 연소가스를 터보펌프 터빈로터와 동일한 형상의 시편에 분사하는 방식으로 시험을 수행하였다. 터빈에 가해지는 열 부하 조건은 운용 설계점에서 극한 조건까지 세 종류로 구분하여 시험이 진행되었으며 모든 시험에서 터빈로터의 손상은 발견되지 않았다. Turbine rotor-pyrostarter coupled test was performed for the verification of thermo-structural suitability of a turbopump turbine. Newly developed solid propellant and design concept were adopted in pyrostarter development. In case of turbine rotor, rotor configuration modification for the thermal stress relief and post EDM machining for the surface integrity improvement process were applied. In the test, combustion gas of pyrostarter was directly ejected on the stationary turbine rotor specimen through the identically shaped flow passage of turbopump. Three kind of thermal load - design to extreme condition - test were performed and no damages were found on the turbine rotor specimens.