http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하이브리드 V2X 통신시스템의 응용서비스 성능 평가를 위한 시나리오 설계 및 분석 연구
이성훈,이창교,변상봉,조수현,조현규 한국정보통신학회 2019 한국정보통신학회논문지 Vol.23 No.4
The convergence of the automotive industry and the ICT technology can be broadly divided into the commercial service sector and the Cooperative-ITS (C-ITS) service sector. The C-ITS service sector is using V2X communication technology as a field that aims to provide safer transportation, more green and efficient transportation, and more predictable and productive mobility. The recent convergence of self-driving cars and connected cars requires high data rates, low transmission delays, and low transmission error rates. Interest in comparison of performance between WAVE and C-V2X (LTE-V2X, 5G-V2X) has been amplified and application services by communication technology are being studied. In this paper, we design the application performance evaluation method of Hybrid V2X communication system and confirm that the decrease of packet error rate (PER) performance is caused by the increase of communication distance, not the vehicle speed. 자동차산업과 ICT 기술의 융합 분야는 크게 상용서비스 분야와 Cooperative–ITS (C-ITS) 서비스 분야로 나뉠 수 있다. C-ITS 서비스 분야는 더 안전한 운송, 더 친환경적이고 효율적인 교통, 및 더 예측가능하고 생산적인 이동성을 제공하는 것을 목표로 하는 분야로서 V2X 통신기술이 사용되고 있다. 최근 이슈가 되고 있는 자율주행자동차와 커넥티드 카의 융합을 위해서는 높은 데이터 전송율과 낮은 전송 지연, 그리고, 낮은 전송 오류율을 요구한다. 이를 위하여 최근의 WAVE와 C-V2X (LTE-V2X, 5G-V2X) 성능 비교에 관심이 증폭되고 있으며, 통신 기술별 응용서비스들이 연구되고 있다. 본 논문에서 하이브리드 V2X 통신시스템의 응용서비스 성능평가 방법에 대해 설계하였고, 패킷에러율(PER) 성능의 감소는 차량속도가 아닌 통신 거리의 증가에 의해 발생하는 것으로 보이는 결과 등을 확인하였다.
이성훈,이창교,박재홍,조수현,최승호,김태형,Lee, Sung-hun,Lee, Chang-Kyo,Park, Jae-Hong,Cho, Soo-Hyun,Choi, Seung-Ho,Kim, Tae-Hyung The Korea Institute of Information and Commucation 2020 한국정보통신학회논문지 Vol.24 No.9
In this study, we designed a single antenna taking into account the performance, such as return loss and radiation pattern, of 28 GHz and 38 GHz array antennas for 5G mobile devices. In millimeter wave band communication, high path loss occurs between transmission and reception, unlike in conventional microwave bands. In the design of array antennas for 5G millimeter wave terminals, antenna performance such as antenna gain, bandwidth, isolation between antenna elements, side-lobe level(SLL), etc. should be further considered. The performance of the designed array antennas was analyzed by spacing the antenna elements at half a wavelength. Our results proved the validity of the design and its suitability for applications in mm-Wave by showing that the 28 GHz and 39 GHz array antennas had antenna gains of 13.5 dBi and 11.3 dBi and return losses below -18.4 dB and -20 dB, correspondingly. 본 논문에서는 28 GHz와 38 GHz의5G 단말용 안테나 타입별 반사손실, 방사패턴 등의 성능을 고려하여 단일안테나를 설계하고, 안테나 소자를 반 파장 간격으로 배열하여 5G 단말용 배열안테나를 설계하였고 성능을 분석하였다. 밀리미터파 대역 통신에서는 기존의 마이크로파 대역에서와는 달리 송수신 간의 높은 경로손실이 발생한다. 5G 밀리미터파 단말용 배열안테나 설계에서는 안테나의 이득, 대역폭뿐만 아니라, 안테나 소자 간 격리도, side-lobe level(SLL) 등의 안테나 성능이 추가적으로 고려되어야 한다. 28GHz와 39GHz에서 제안하는 안테나 이득이 각각 약 13.5dBi 와 11.3dBi, 반사손실도 -18.4 dB과 -20 dB 이하의 측정 결과로부터 설계의 타당함을 입증하였고, 밀리미터파 대역 응용으로서도 적합함을 보였다.
N-alkylammonium법에 의한 Mica형 층상 규산 알루미늄의 양이온 전하 밀도의 측정
최진호,박중철,김창은,이창교 한국세라믹학회 1985 한국세라믹학회지 Vol.22 No.4
The layer charge densities and interlayer C. E. C(cation exchange capacity) of ten mica-type aluminosilicates from Yong-il Pohang-prefacture were determined by n-alkylammonium method which is based on the mo-nolayer-doubelelayer structural transition of ni-alkylammonium ion in interlayer space of the layered silcates. The upper and lower limits of layer charge and interlyer C, E, C estimated were about 0.25~0.36 eq/(Si, $Al)_4$ O10 and 69~99meq/100g, respectively.
명반 및 수산화 알루미늄을 이용한 명반 및 수산화 알루미늄을 이용한 ${\alpha}-Al_2O_3$의 합성 (II) 열분해법에 의한 초미분 ${\alpha}-Al_2O_3$
최진호,유종석,김진태,이창교,이낭호,Choy Jin-Ho,Yoo Jong-Seok,Kim Jin-Tae,Lee Chang-Kyo,Lee Nang-Ho 대한화학회 1991 대한화학회지 Vol.35 No.4
천연 규산 알루미늄 광인 할로이사이트 광물로부터 고순도 ${\alpha}-Al_2O_3$을 합성하기 위해 ${\alpha}-Al_2O_3$의 전구물질인 수산화 알루미늄과 암모니움 명반을 합성하였다. 이들에 대한 열분해 반응기구는 열분석, XRD 및 IR 측정으로부터 규명되었고, 열분해로부터 얻어진 ${\alpha}-Al_2O_3$의 미세구조 및 비표면적은 SEM 및 BET 측정에 의해 수행되었다. 이때 ${\alpha}-Al_2O_3$ 입자의 크기는 모두 ${\phi}$ = 0.1∼0.5 ${\mu}$m이었으나, 비표면적의 크기는 암모니움 명반으로부터 얻어진 경우(89.0 m$^2$/g)가 수산화 알루미늄으로부터 얻어진 경우(7.3 m$^2$/g)보다 매우 높은 결과를 얻었다. In order to synthesize high-purity alpha alumina fine powder, the aluminum hydroxide and ammonium aluminum sulfate(alum) precursor were prepared from natural alumino-silicate(halloysite). The thermal decomposition mechenism for both precursors was elucidated by DTA/TG, XRD and IR analysis. The microstructure, specific surface area and purity of ${\alpha}-Al_2O_3$ were characterized by SEM, and BET analysis. The particle size of ${\alpha}-Al_2O_3$ was determined to be ${\phi}$ = 0.1∼0.5 ${\mu}$m. However, the specific surface area for the alum derived ${\alpha}-Al_2O_3$(89.0 m$^2$/g) was extremely higher than that for the aluminum hydroxide derived one(7.3 m$^2$/g).