http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
발사체 추력제어 안정성을 위한 PWM 솔밸브의 탱크압력제어
이중엽(Joong-Youp Lee),홍문근(Moon-Geun Hong),한상엽(Sang-Yeop Han),김영목(Young-Mog Kim) 한국유체기계학회 2006 유체기계 연구개발 발표회 논문집 Vol.- No.-
This paper achieved dynamic characteristics with test to use solenoid valve for flight model that have present. Designed pressure control virtual system which PWM solenoid valve to use test result. Examination compared solenoid valve dynamic characteristics in atmosphere and cryogenic fluid and presented technique and valuation method that measured upstream and down stream pressure of solenoid valve, as well as, temperature, excitation voltage etc. These test results could confirm solenoid valve response time and maximum using frequency characteristic at use in atmosphere and cryogenic temperature and this derived design variables pressure control system from those bases.
이중엽(Joong-Youp Lee),이수용(Soo-Yong Lee) 한국항공우주연구원 2008 항공우주기술 Vol.7 No.2
추력제어를 목적으로 제작된 제어밸브를 AMESim 시뮬레이터를 통해 모델링을 수행했다. 제어밸브와 유사하게 모델링하여 여러 물리적인 동특성을 시뮬레이션을 통해 예측했다. BLDC 모터를 이용하는 제어밸브 제어를 위하여 속도제어기법을 제안했으며, 시뮬레이션 및 시험을 통해 그 성능을 증명했다. 제어밸브에 대한 2차 필터(Pre-Filters)를 사용하여 적절한 안정성 이득을 확보 했다. BLDC 모터의 속도제어 기법을 이용하는 제어밸브는 PI 게인 스케줄링 기법 보다 시스템 활용 시 용이하고, 유량제어 시험결과를 통해 시스템에 적용 가능성을 시사했다. Dynamic characteristics of a control valve, which plays an important role in thrust control of liquid rocket engines, have been analysed by AMESim simulator modeling. A speed control method has been proposed for the control of the valve equipped with a BLDC motor and the performances of this control method have been proved in making a comparison between the predictions of simulation and experimental results. Moreover, it is shown that a control valve with a second pre-filter is enough stable to the flow disturbances. The speed control method for BLDC motor is more simpler than PI gain scheduling method for the application in complex flow system.
이중엽(Joong-Youp Lee),정태규(Tae-Kyu Jung),한상엽(Sang-Yeop Han),김영목(Young-Mog Kim) 한국항공우주연구원 2006 항공우주기술 Vol.5 No.2
본 논문에서는 제어밸브에 대한 유공압적, 기계적, 전기적 부분에 대하여 전반적인 기술 적인 사항 및 설계 기술들을 다루었다. 특히 제어밸브를 이용한 시험으로부터 도출하기 어려운 많은 요소의 동특성을 시스템 모사코드인 AMESim 을 이용하여 예측해보았고, 일반 적인 물리적 동특성도 또한 실제 시험결과와 비교 검토하였다. 또한 제어밸브의 단품 상태에서의 동특성 외에 시스템 연계 상황에서의 특성도 예측하고자 하였고, 이를 근간으로 하 여 발사체 엔진 추진제공급시스템의 제어 관련 분야에 응용하였다. This paper deals with technological and design skills for all pneumatical, hydraulical, mechanical, and electrical parts related to control valve. Especially, a variety of dynamic characteristics, which are not easily extracted from field tests using control valves, are studied by system-simulation code, AMESim. The simulated results are also compared and examined with actual testing results in terms of physical dynamic characteristics. In addition, this paper contains the simulated system characteristics including dynamic characteristics in component level of valve itself. Based on the results, it is applied to control system of propellant feeding system in liquid-propellant engine of satellite launcher.
서보모터를 이용한 Inline Co-axil 밸브 제어
이중엽(Joong-Youp Lee),정태규(Tae-Kyu Jung),이수용(Soo-Yong Lee) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.5
Five control methods (Speed Control, PID Gain Scheduling, Loop Time Control, Simple PID, Switching Control) have been applied to the control of an Inline Co-axial valve by the simulation of AMESim. The simulation results have shown that the speed control method is the most stable and the fastest way to reach to the set point in the simulation of the flow control. Moreover, It has been found that the five control methods have the almost same characteristics in the power consumption, the counter electromotive force, and the motor angular velocity. According to the analysis results, the fast and stable control characteristics of the speed control method is the most suitable for the flow control using a inline co-axial valve with a DC(BLCD) motor.
이중엽(Joong-Youp Lee),정태규(Tae-Kyu Jung),이수용(Soo-Yong Lee) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.5
As a brush DC motor, the brushless DC motor is also operated by DC power supply but has no mechanical contacts occurred by a brush or a commutator. Though the performance of BLDC motor is almost similar with that of DC motor, the BLDC motor has the advantage of the high speed responsibility, the high controllability, and the high effectiveness. The control valve using the BLDC motor, which excludes the burnout effect provoked possibly by the vacuum condition during the flight, is employed for the upper stage of a launch vehicle. For the component level analysis, the dynamic response characteristics of BLDC and DC motors to the same design input sources have been studied in using AMEsim.
이중엽(Joong-Youp Lee),정태규(Tae-Kyu Jung) 한국항공우주연구원 2009 항공우주산업기술동향 Vol.7 No.2
통신을 비롯한 각종 수요로 위성에 대한 수요가 급증하고 있는 가운데 미국, 러시아, 유럽, 일본, 중국 등 우주기술 분야 선진국에서는 대형 위성을 원하는 궤도에 올릴 수 있는 발사체 기술을 확보하고 있다. 대형 위성발사체 추진기관 관련 기술은 장거리 미사일을 등 군사적인 목적으로 이용될 가능성과 첨단 기술 유출의 기피와 같은 문제점으로 기술 도입이 어려운 실정이다. 이를 위해 밸브 국산화 설계 및 시제품 제작을 통한 기술 축적은 추진기관시스템 밸브 국산화에 기여할 것이며 국내 밸브 설계 및 개발 수준 향상에 크게 기여할 것이다. 본 논문에서는 해외에서 개발된 밸브들과 국내에서 개발된 밸브들의 현황을 소개 한다. 밸브 개발 기술은 KSLV-II 엔진시스템 및 추진기관의 안정적인 운용에 필요한 엔진 제어 시스템 구성에 기초가 될 것이다. Up to date, demands for satellite including communication are increasing. Advanced countries on space technology such as America, Russia, Europe, Japan, China and so on already had secured launch vehicle technology which can insert a large class satellite to proper orbit. The introduction of technologies on the large class launch vehicle including propulsion system is difficult due to the utilization possibility for defensive reason. The acquisition of indigenous technical expertise on the design and manufacture of valves is believed to contribute to the successful local development of valves for propulsion systems and to significant improvement of local technical level of valve design and development. This paper introduces current status of valves developed by other countries as well as valves developed in domestic. The Developed technology of valves may underlie the construction of engine control systems required for the reliable operation of the KSLV-II engine system and propulsion system.