http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다중경로 다중사용자 환경에서의 초광대역 거리추정의 성능 분석
이준용,유성열,Lee Joon-Yong,Yoo Sungyul 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.12C
초광대역 신호의 높은 시간해상도는 복잡한 다중경로 환경에서의 정밀한 거리추정 및 위치추적 을 가능하게 한다. 그러나 신호의 도착신호 추정시 발생하는 큰 추정오차의 발생은 거리추정의 정확도를 저하시키는 요인이 된다. 본 논문에서는 다중경로, 다중사용자 환경에서 초광대역 거리추정의 성능을 평가한다. 상호상관을 이용한 직렬검색 알고리듬을 적용할 때 발생하는 추정오차를 분석하고 모의실험 결과를 개시한다. Ultra-wideband (UWB) ranging poses a set of time delay estimation problems for designers. The possibility of a large error can be a challenging problem for accurate ranging and positioning. An approximate analysis of large error performance of UWB ranging in multipath and multiuser environments is posed. Both analytical and experimental approaches are taken to evaluate the large error variance in a correlation-based serial search scenario.
이준용,유찬,김욱기,김동욱,Lee, Joon-Yong,Yu, Chan,Kim, Uk-Gie,Kim, Dong-Wook 한국농공학회 2012 한국농공학회논문집 Vol.54 No.5
Accurate modeling rainfall induced landslide and slope stability requires a detailed knowledge of the distribution of material strength characteristics and suction distribution. However, material properties obtained from the drying cycle are still used for infiltration analysis in many cases, even though material properties of wetting cycle are quite different from those of drying cycle due to hydraulic hysteresis and air occlusion. Therefore, the selection of proper material properties such as soil-water retention curve (SWRC) and the hydraulic conductivity function (HCF) reflecting characteristics of wetting cycle and air occlusion is an essential prerequisite in order to simulate the infiltration phenomena and to predict the suction and water content distribution in unsaturated soils. It is concluded that the simulation of infiltration with material properties from the drying cycle did not reasonably match with experimental outputs. Further discussion is made on how to describe the material properties considering air occlusion during wetting cycle over the entire suction range in order to simulate infiltration phenomena.
단안약시 환자에서 성공적인 가림치료 종료 후 장기적인 시기능
이준용,장혜란.Jun Yong Lee. MD. Hae Ran Chang. MD 대한안과학회 2010 대한안과학회지 Vol.51 No.11
Purpose: To evaluate a long-term visual outcome following cessation of occlusion therapy in unilateral amblyopia. Methods: A total of 70 patients who successfully finished occlusion therapy (including maintenance therapy) for unilateral amblyopia and were followed up for at least 1 year after cessation of occlusion were retrospectively reviewed. Even after the success of occlusion therapy, maintenance therapy or regular examinations were performed until the visual development of the normal fellow eye (NE) was completed. The recurrence of amblyopia was defined as a 2 or more logarithm of the minimum angle of resolution (LogMAR) levels of visual acuity (VA) reduction of the amblyopic eye (AE), as compared to the NE, at the last evaluation. Results: Amblyopia was associated with strabismus in 19 patients, anisometropia in 33 patients, and both in 39 patients. The mean age at the cessation of occlusion and at the last evaluation was 7.7 ± 1.9 years and 11.4 ± 2.9 years, respectively. The mean VA of the AE was 0.01 ± 0.03 and mean stereopsis was 101.7 ± 87.5 seconds of arc at the cessation of occlusion, and both improved at the last evaluation. However, the improvement of mean VA of the AE was not statistically significant (p = 0.21). The mean duration of maintenance therapy was 25.6 ± 21.0 months, and was 3 times longer than the duration required to achieve success in the treatment of amblyopia. At the last evaluation, the recurrence of amblyopia was not found, while 3 patients (4.3%) lost 1 LogMAR level of VA in the AE, as compared to the NE. Conclusions: Visual outcome following successful cessation of occlusion therapy for unilateral amblyopia was favorable without recurrence of amblyopia. J Korean Ophthalmol Soc 2010;51(11):1499-1503
역해석기법을 이용한 불포화토 투수계수함수 산정에 관한 연구
이준용,한진태,Lee, Joonyong,Han, Jin-Tae 한국농공학회 2013 한국농공학회논문집 Vol.55 No.4
Unsaturated hydraulic conductivity function is one of key parameters to solve the flow phenomena in problems of landslide. Prediction models for hydraulic conductivity function related to soil-water retention curve equations in many geotechnical applications have been still used instead of direct measurement of the hydraulic conductivity function since prediction models from soil-water retention curve equations are attractive for their fast and easy use and low cost. However, many researchers found that prediction models for the hydraulic conductivity function can not predict the hydraulic conductivity exactly in comparison with experimental outputs. This research introduced an inverse analysis to evaluate the hydraulic conductivity function corresponding to experimental output from the flow pump system. Optimisation process was carried out to obtain the hydraulic conductivity function. This research showed that the inverse analysis with flow pump system was suitable to assess the hydraulic conductivity in unsaturated soil, and the prediction models for the hydraulic conductivity were led to the significant discrepancy from actual experimental outputs.
MCLT 피크쌍 기반의 강인한 해시 함수를 이용한 오디오 핑거프린팅
이준용,김형국,Lee, Jun-Yong,Kim, Hyoung-Gook 한국음향학회 2015 韓國音響學會誌 Vol.34 No.2
본 논문은 MCLT(Modulated complex lapped transform) 피크쌍 기반의 강인한 해시 함수를 이용한 오디오 핑거프린팅을 제안한다. 기존 방식의 오디오 핑거프린팅은 시간-스케일, 피치-이동, 이퀄라이제이션과 같은 다양한 왜곡이 발생했을 때, 강인한 핑거프린트를 추출하지 못한다는 문제점이 있다. 이를 해결하기 위해 본 논문에서는 MCLT 스펙트럼, 현저한 피크검색을 위한 적응적 문턱값 방식, 개선된 해시 함수를 이용하여 잡음과 왜곡 환경 강인한 오디오 핑거프린팅을 추출하였다. 실험결과 제안된 방식이 잡음과 왜곡 환경에서 보다 강인한 핑거프린팅을 추출할 수 있으며 매칭 인식률을 향상 시키는 것을 보여준다. In this paper, we propose an audio fingerprinting using robust hash based on the MCLT (Modulated Complex Lapped Transform) peak-pair. In existing methods, the robust audio fingerprinting is not generated if various distortions occurred; time-scaling, pith-shifting and equalization. To solve this problem, we used the spectrum of the MCLT, an adaptive thresholding method for detection of prominent peaks and the novel hash function in the audio fingerprinting. Experimental results show that the proposed method is highly robust in various distorted environments and achieves better identification rates compared to other methods.
커널 스펙트럼 모델 backfitting 기반의 로그 스펙트럼 진폭 추정을 적용한 배경음과 보컬음 분리
이준용,김형국,Lee, Jun-Yong,Kim, Hyoung-Gook 한국음향학회 2015 韓國音響學會誌 Vol.34 No.3
본 논문은 커널 스펙트럼 모델 backfitting 기반의 로그 스펙트럼 진폭 추정부를 적용한 배경음과 보컬음 분리를 제안한다. 기존의 커널 스펙트럼 모델 기반의 배경음과 보컬음 분리는 추출하고자하는 객체의 모델을 기반으로 위너형태의 평균 제곱의 오차의 이득값을 학습함으로써 배경음과 보컬음을 분리하는 기술이다. 본 논문은 기존의 커널 스펙트럴 모델 기반의 배경음과 보컬음 분리 방식에서 위너형태의 이득값 대신 로그 스펙트럼 진폭 추정을 적용하여 기존 방식 보다 명료한 배경음과 보컬음을 추출한다. 실험결과는 본 논문에서 제안한 방식이 기존의 방식들보다 더 우수하다는 것을 보인다. In this paper, we propose music and voice separation using kernel sptectrogram models backfitting based on log-spectral amplitude estimator. The existing method separates sources based on the estimate of a desired objects by training MSE (Mean Square Error) designed Winer filter. We introduce rather clear music and voice signals with application of log-spectral amplitude estimator, instead of adaptation of MSE which has been treated as an existing method. Experimental results reveal that the proposed method shows higher performance than the existing methods.
퍼지이론을 이용한 FPGA회로의 효율적인 테크놀로지 매핑
이준용,박도순,Lee, Jun-Yong,Park, Do-Soon 한국정보처리학회 2000 정보처리논문지 Vol.7 No.8
테크놀로지 매핑은 VLSI 설계자동화(CAD) 시스템의 한 단계로서, 설계된 회로를 논리적 단계에서 물리적 단계로 매핑해 준다. 테크놀로지 매핑은 효율성은 매핑된 회로의 자연시간과 회로의 면적에 의해서 평가되어진다. 특히 순차회로에서는 레지스터 사이의 조합회로의 최대지연시간에 의해서 전체회로이 지연시간이 결정된다. 본 논문에서는 순차회로에 대한, 건설적인(constructive) 단계와 반복적인(iterative)단계의 리타이밍 기술과 퍼지 논리에 의해 향상된 FPGA 매핑 알고리즘을 소개한다. 주어진 초기회로는 건설적인 방법에 의하여 FPGA회로로 초기매칭 되어진 후 반복적인 리타이밍에 의하여 매핑회로의 효율을 높이게된다. 초기회로에 주어진 여러 가지 기준들을 결정 함수(Decision Marking Function)에 대한 퍼지 이론 규칙의 계층적인 구조로 구성된다. 제안된 매퍼는 MCNC 밴치마커의 실험을 통해 지연시간과 면적에서 기존 매핑시스템의 성능을 능가함을 보여준다. Technology mapping is a part of VLSI CAD system, where circuits in logical level are mapped into circuits in physical level. The performance of technology mapping system is evaluatecJ by the delay and area of the resulting circuits. In the sequential circuits, the delay of the circuit is decided by the maximal delay between registers. In this work, we introduce an FPGA mapping algorithm improved by retiming technique used in constructive level and iterative level, and by fuzzy logic technique. Initial circuit is mapped into an FPGA circuit by constructive manner and improved by iterative retiming. Criteria given to the initial circuit are structured hierarchically by decision-making functions of fuzzy logic. The proposed system shows better results than previous systems by the experiments with MCNC benchmarkers.
전절권 분포형 권선을 통한 제어모멘트자이로 김블의 저속 안정성 개선 연구
이준용,이헌조,오화석,송태성,강정민,송덕기,서중보,Lee, Jun-yong,Lee, Hun-jo,Oh, Hwa-suk,Song, Tae-Seong,Kang, Jeong-min,Song, Deok-ki,Seo, Joong-bo 항공우주시스템공학회 2019 항공우주시스템공학회지 Vol.13 No.3
전자기적 힘에 의해 김블 모터에 토크가 발생하며 코일 전류 변화는 토크 리플을 야기한다. 이는 김블속도에 영향을 주는 동시에 위성의 자세를 불안정하게 한다. 따라서 위성의 자세 제어 정확도 향상을 위해서는 김블 모터의 토크 리플 저감이 필수적이다. 본 논문에서는 일반적인 집중형 권선과 분포형 권선에 대해 모터의 모델링으로부터 발생 토크를 이론적으로 시뮬레이션 분석하였다. 토크 리플을 저감하는 권선을 선정하여 시제품을 설계 및 제작하여 자기장 및 역기전력의 이론적 해석 결과와 측정 결과를 비교하여 설계와 제작의 합치성을 확인하였다. 저속 시험을 통해 전절권 분포형 권선의 속도 안정도가 향상되어 토크 리플이 저감됨을 입증하였다. The electromagnetic forces generate a torque on the gimbal motor, and changes in the coil current causes torque ripple. This affects the gimbals' speed and results to unstable satellite attitude. It is therefore essential to reduce the torque ripple of the gimble motor with the aim of improving the attitude control accuracy of the satellite. This paper theoretically analyzes the torque generated from the modeling of a motor for general concentrated winding and distributed winding. The prototype was designed and fabricated through selection of the winding that reduces the torque ripple through simulation results. The results of the magnetic fields' theoretical analysis and the back electromotive force of the prototype were compared with the calibrated results for verification of conformity and manufacture of the design. The low-speed test proved that the torque ripple is reduced by improving the speed stability.
가설검증 방식을 통한 UWB Rake 수신기의 기준신호 선택 기법
이준용,유성열,윤성준,하동헌,Lee Joon-Yong,Yoo Sungyul,Yoon Sung-Jun,Ha Dong-Heon 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.2c
초광대역(UWB) 통신시스템의 응용 시나리오는 많은 경우 비가시적(non-LoS) 환경에서의 응용을 가정하고 있다. UWB 신호가 매질을 투과하여 방사될 경우 신호의 왜곡현상이 발생하며, 이는 수신부 상관기의 기준신호와 수신된 신호와의 상관계수를 감소시켜 성능을 저하시키는 요인이 된다. 본 논문에서는 가설검증 방식을 이용한 UWB Rake 수신기의 기준신호 선택 기법을 소개한다. 가설을 세우기 위한 파형의 선택을 위해 벡터 양자화 기법인 Linde-Buzo-Gray(LBG) 알고리듬을 사용하였다. 개시된 알고리듬을 성능을 non-LoS 환경에서 측정된 데이터를 이용해 평가하였다. Many application scenarios of ultra-wideband(UWB) radio assume non-line-of-sigit(non-LoS) signal propagations. Through-material propagation of UWB signal introduces a distortion of the waveform as well as attenuation, which will introduce a decrease of the correlation coefficient between the correlator template and the received signal. A hypothesis test approach to selection of the template waveform for UWB rake receivers is posed. Linde-Buzo-Gray(LBG) algorithm is used to select the candidate waveforms which are used to setup the hypothesis test. The performance of the algorithm is tested using a set of indoor non-LoS propagation measurement data.