http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
빔 혹은 멤버레인 구조를 가지는 써모파일 센서의 다목적 최적설계
이준배,김태윤,Lee, Jun-Bae,Kim, Tae-Yoon 한국센서학회 1997 센서학회지 Vol.6 No.1
이 논문은 빔의 구조를 갖거나 멤브레인의 구조를 갖는 써모파일 센서의 다목적 최적설계에 관한 연구이다. 연구대상의 써모파일 센서는 $Si_{3}N_{4}/SiO_{2}$ 박막위에 알루미늄과 다결정 실리콘을 사용하여 열전쌍을 형성하고, 박막중심부에 $RuO_{2}$를 사용하여 적외선 흡수부를 만들어 중심부와 실리콘림부 사이의 온도차이에 따른 Seebeck 효과에 의한 유기전압을 감지하는 센서를 대상으로 하였다. 최적설계의 목적함수는 센서의 감도, 검출능 (detectivity) 및 열시정수를 대상으로 하였다. 패키지를 고려하여 모델링을 하였으며, 기존의 식의 고찰에 의한 단순 설계방법이 아닌 수학적 계획법을 사용한 다목적 최적화 방법을 이용하여 최적해를 구하였다. 최종적인 최적설계 수식화에는 퍼지계획법에서 사용되는 소속함수를 정의하여 설계자가 우선적으로 신뢰할 수 있는 해를 구 할 수 있도록 하였다. 또한, 제한조건으로서 주위 온도변화에 따른 센서의 출력전압변화를 포함시켜 실제 사용되는 환경을 고려하였다. This paper presents the multi-objective optimal design of thermopile sensor having beam or membrane structure. The thermopile sensor is composed of $Si_{3}N_{4}/SiO_{2}$ dielectric membrane, Al-polysilicon thermocouples and $RuO_{2}$ thin film for black body. The sensing method is based on the Seebeck effect which is originated from the temperature difference of the two positions, black body and silicon rim. The objective functions of the presented design are sensitivity, detectivity and thermal time constant. The modelling of the sensor is proposed including the package. The multi-objective optimization technique is applied to the design of the sensor not only inspecting the modelling equation but also simulating mathematical programming method. Especially, fuzzy optimization technique is adapted to get the optimal solution which enables the designer to reach the more practical solution. The design constraint of the voltage output originated from the change of the environmental temperature is included for practical use.
금강 수계 주요지류인 갑천과 미호천에서 잠정유해물질 오염원 확인 연구
이준배 ( Jun Bae Lee ),이재정 ( Jay Jung Lee ),조윤해 ( Yoon Hae Cho ),윤조희 ( Jo Hee Yoon ),홍선화 ( Seoun Hwa Hong ),이대희 ( Dae Hee Lee ),이수형 ( Soo Hyung Lee ),조영환 ( Young Hwan Cho ),신호상 ( Ho Sang Shin ) 한국환경농학회 2016 한국환경농학회지 Vol.35 No.1
BACKGROUND: Water quality is of concern to water utility operators, public health officials, and populations using the water. If any contaminant is released from a point of entry, it could be spread rapidly throughout the water stream. So the identification of the location of the points of entry and its release history are critical informations to establish the management strategy. METHODS AND RESULTS: Aniline, nonylphenol, pentachlorophenol and formaldehyde in 39 surface water samples were analysed using Gas chromatography-mass spectrometry (GC-MS) methods. Formaldehyde, aniline and nonylphenol were mainly detected in the near sites where industrial waste water and domestic sewage were discharged into stream. But pentachlorophenol was detected in the downstream samples where pulp manufacturing plants were operated. CONCLUSION: Results indicate that pentachlorophenol found in main stream of Guem river was mainly introduced from pulp manufacture industries. Otherwise, formaldehyde, aniline and nonylphenol were mainly contaminated from the industrial waste water and domestic sewage.
대청호 상류유역의 기 개발된 유달부하량 산정식의 적용성 평가
이준배 ( Jun Bae Lee ),김갑순 ( Kap Soon Kim ),이규승 ( Kyu Seung Lee ),윤영삼 ( Young Sam Yoon ),임병진 ( Byung Jin Lim ),정재운 ( Jae Woon Jung ) 한국환경농학회 2012 한국환경농학회지 Vol.31 No.1
BACKGROUND: To improve the Daechung reservoir water quality, a quantitative estimation of the delivery load from upper watershed need to be conducted prior to others. To do so, an intensive monitoring is necessary because of the complexity and uncertainty of the delivery load from uppper watershed. However, intensive monitoring need to invest much time, cost, and effort. So, many researcher have developed an equation to estimate the delivery loads. But, relatively little research has been conducted on the applicability of pre-developed equation using other sites. Therefore, the objective of this study was to evaluate application of the equation for BOD, T-N and T-P delivery load. METHODS AND RESULTS: To verify the applicability of the equation, the following equation was used; Delivery loads(kg/day)=generated pollutant loads×(1-α)×(daily outflow/β)?. The equations could be calculated the daily delivery loads of streams without any data of water quality, only with the data of daily runoff of study sites. The equations were applied to Youngdogcheon, Chogangcheon, Bocheongcheon, Sookcheon to examine its applicability using monitoring data. The results showed that the estimated delivery loads were in a good agreement with the observed data and indicated reasonable applicability of the equations. CONCLUSION(s): Overall, the equations were satisfactory in estimation of delivery loads at upper watershed of the Daechung reservoir. Therefore, the equations could be contributed to better water quality management in the Daechung reservoir.