http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
쌍극자 광원의 진동방향, Mie 산란자, 그리고 Pillow 렌즈가 OLED의 광추출효율에 미치는 영향에 대한 시뮬레이션 연구
이주섭,이종완,박재훈,고재현,Lee, Ju Seob,Lee, Jong Wan,Park, Jaehoon,Ko, Jae-Hyeon 한국광학회 2014 한국광학회지 Vol.25 No.4
본 연구에서는 FDTD와 광선추적기법을 결합한 시뮬레이션을 활용해 광원으로 설정된 쌍극자의 진동 방향, 유리기판에 적용된 Mie 산란입자와 Pillow 렌즈가 광결정 구조가 포함된 OLED의 광추출효율에 미치는 영향을 조사하였다. 쌍극자 광원의 진동방향이 OLED 표면에 대해 수평인 경우, 광결정구조만 적용된 OLED의 효율이 54%인데 반해 최적화된 조건의 Mie 산란입자, Pillow 렌즈가 적용된 OLED는 약 86%의 광추출효율을 나타냈다. 아울러 광결정 구조로 인해 특정 각도로 광도가 증가하는 문제점이 Mie 산란입자의 산란효과로 인해 완화될 수 있음을 알았다. 본 연구는 광추출효율을 향상시키는 다양한 광학구조를 적용함과 더불어 발광체 유기분자의 배향을 조절함으로써 OLED의 효율을 큰 폭으로 향상시킬 수 있음을 보여준다. The net effect of the emitter orientation, Mie scatters, and pillow lenses on the outcoupling efficiency (OCE) of a bottom-emitting OLED having an internal photonic crystal layer was investigated by a combined optical simulation based on the finite-difference time-domain method (FDTD) and the ray-tracing technique. The simulation showed that when the emitter orientation was horizontal with respect to the OLED surface, the OCE could be increased by 54% when a photonic crystal layer was employed, while it could be improved by 86% under optimized conditions of Mie scatters and pillow lenses applied to the glass substrate. The peculiar intensity distribution of the OLED, caused by the periodic lattice structure of the photonic crystal layer, could be ameliorated by inserting Mie scatters into the glass substrate. This study suggests that conventional outcoupling structures combined with control of the emitter orientation could improve the OCE substantially.
군지연 등화된 두 개의 통과대역을 갖는 필터의 합성에 관한 연구
이주섭,엄만석,박종흥,Lee Juseop,Uhm Man Seok,Park Jong Heung 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.1
본 논문에서는 각 통과대역이 군지연 등화된 두 개의 통과대역을 갖는 필터의 합성 방법에 관하여 언급하였다. 각 통과대역이 군지연 등화된 특성을 가지게 함으로써, 기존의 이중 통과대역 필터보다 디지털 데이터 전송에 있어서 비트 에러율(BER)을 감소시킬 수 있고, 군지연 변화를 등화시키기 위하여 외부 등화기가 별도로 필요하지 않다. 본 논문에서의 합성 방법 타당성 검증을 위하여 각 통과대역이 군지연 등화된 5차 타원 응답특성을 갖는 두 개의 통과대역을 갖는 10차 이중모드 필터를 합성하였다. This paper describes a synthesis method for a self-equalized dual-passband filter. Compared to conventional dual-passband filter, a self-equalized dual-passband filter can reduce BER(bit error rate) in digital data communications and does not need an external equalizer for group-delay equalization. To validate the synthesis technique, a 10-pole dual-mode dual-passband filter which has two self-equalized 5-pole elliptic response passband is synthesized.
이주섭(Lee Juseop) 한국언어문학회 2009 한국언어문학 Vol.69 No.-
This thesis studied and classified distinctive features for elementary Korean textbook by revised 7thcurriculum into the aspect of composing text books and the aspect of curriculum to be detailed. In relation to whole composition of textbooks, the most distinctive features of elementary Korean textbook by revised 7th curriculum are reduction of unit size and increasing the number of units. This is because elementary Korean textbook by revised 7th curriculum didn't reflect the part of learning by grades. This thesis classified distinctive features for elementary Korean textbook by revised 7th curriculum into seven parts. In connection with the composition of each unit, It also analyzes the distinctive features of introduction learning, comprehension learning, completion learning, application learning, resting area and so on. In relation to the aspect of curriculum to be detailed, It points out the confusion of establishing a goal which is caused because 'Practical' part of revised curriculum didn't coincide with the parts of 'essence', 'principle' and 'attitude'. 'Practical' part of revised curriculum is designed to correspond with other parts. So, making curriculum to be detailed is much easier to proceed in revised curriculum. In cases which have the confusing of revised curriculum's interpretation, this thesis presents flexible examples applied to the logic of textbook makers.
A Study on the Characteristics and Implications of the Revisions of IncotermsⓇ2020
이주섭(Ju-Seob Lee) 한국국제상학회 2020 國際商學 Vol.35 No.2
국제적으로 무역거래조건의 해석에 관한 통일규칙으로서 가장 널리 이용되고 있는 것이 Incoterms이다. Incoterms는 1936년 제정된 이후로 수차례 개정이 있었고, 2020년 1월 1일에 제8차 개정이 이루어져 현재 IncotermsⓇ2020이 시행중이다. IncotermsⓇ2020은 IncotermsⓇ2010과 비교할 때, 여러 가지 사항들이 개정되었지만 그 중에서도 특히 두드러지는 것은 Incoterms 규칙 내 조항의 순서변경, FCA상 본선적재표기 B/L에 대한 규정신설, CIP 조건에서 매도인의 최대부보의무 규정, DAT에서 DPU로 명칭의 변경 및 의무범위 확대 등 특징적인 사항 몇 가지를 꼽을 수 있다. 본 연구는 IncotermsⓇ2020의 개정사항들이 어떠한 주요지침을 설명하고 있는지 살펴보고, 그러한 개정사항을 실무에 적용했을 시 발생할 수 있는 문제점을 미리 제고·분석함으로써 그에 따른 시사점을 제시하고자 한다. 나아가 학계 및 실무계에서 개정 Incoterms를 사용하는데 따른 해석상의 오해를 줄이고, 이용상 도움을 주고자 하는 취지로 연구를 진행하였다. Purpose : The purpose of this study is focused on the details of the major revision of the Incoterms 2020 which went into effect on 1 January 2020. In addition, the study also intended to help the academic circles and practice by analyzing potential problems to be encountered in advance and minimizing friction followed by the revision when the reviewed Incoterms are applied to the practice. Research design, data, methodology : This study mainly referred to the revised version of Incoterms 2020 published by ICC and official Korean translation of Incoterms 2020. In addition, this research was conducted on the basis of domestic papers and academic textbooks that studied the Incoterms. Results : The major revisions to the Incoterms 2020 include several things such as changes in the order of provision in the regulation of the Incoterms 2020, stipulation of the maximum obligation to insure under CIP conditions, and establishment of the B/L for the on board notation on the FCA. Conclusions : This study was intended to provide convenience and help the academic circles and practice by analyzing the issues caused in accordance with the major revisions in the Incoterms 2020 and suggesting implication for practical application to its users.
이주섭(J. S. Lee),김진동(J. D. Kim),김형종(H. J. Kim) 한국소성가공학회 2013 한국소성가공학회 학술대회 논문집 Vol.2013 No.5
This study aims to determine the limit strains more accurately and reasonably when deriving the forming limit curve (FLC) from experiments. The international standard ISO 12004-2 proposed in its recent version (2008) that the limit major strain should be determined by using the best-fit inverse parabola of second order for the experimental strain distribution. In the case that the fracture does not occur in the center of the specimen due to insufficient lubrication as usual, however, the inverse parabolic fit does not give a realistic fit because of its intrinsic symmetry in shape. In this study it is shown that the inverse quartic function can lead to much better fit than the inverse parabola in almost all samples of the FLC tests including asymmetric strain distribution.