http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
복권형 하이브리드 스테핑 전동기의 회전차 위치 센서리스 최적 Lead Angle 제어
이종언,우광준,Lee, Jong-Eon,Woo, Kwang-Joon 대한전자공학회 1999 電子工學會論文誌, S Vol.s36 No.2
본 연구에서는 복권형 하이브리드 스테핑 전동기의 회전자 위치 함수로 주어지는 순시 상전류식을 유도하여 Laad Angle에 따른 순시 상전류값의 변화를 보이고, 특히 여자 펄스 인가후 ${\pi}/2$ 시점의 수닛 상전류값으로부터 회전자 위치 정보를 얻을 수 있음을 이론식 및 컴퓨터 시뮬레이션에 의해 확인하였다. 이러한 사실으로부터 복권형 하이브리드 스테핑 전동기의 폐루프 운전을 위해 회전자 위치 검출기를 사용하지 않고 전동기의 파라미터가 고려된 최적 Lead Angle이 실현된 여자 펄스를 생성시키는 제어기를 마이크로컨트롤러에 의해 구성하고 실험하였다. 구성된 제어기는 A/D 변환기, 프로그래머블 입.출력 타이머 및 전동기 속도에 대한 최적 Lead Angle 값을 갖는 변환 테이블 등의 기능을 갖는 마이크로컨트롤러와 또한 전동기의 속도와 여자 펄스 인가후 ${\pi}/2$ 시점의 순시 상전류값에 대한 정토오크 발생영역에 해당하는 Lead Angle 값을 갖는 변환 테이블을 위한 ROM 등으로 구성되어 외부 부가회로를 최소화하였으며, 전동기의 파라미터 등의 변화에 따른 제어량의 병환 테이블이 내용과 제어 S/W 에 의존함으로써 유연성을 확보하였다. 이와 같이 구성된 복권형 하이브리드 스테핑 전동기의 회전자 위 센서리스 최적 Lead Angle 시의 순시 상전류 파형과 유사한 파형을 얻음으로써 최적 Lead Angle 이 실현되었음을 확인할 수 있었다. In this paper, we show that the instantaneous phase current of the bifiler-wound hybrid stepping motor is dependent of lead angle and that the information of motor position is obtained from the instantaneous phase current at ${\pi}/2$ by the theoretical formular and its computer simulation results. From the facts, we design the microcontroller-based motor position sensorless controller of optimal lead angle, which generates the excitation pulses for the closed-loop drives. The controller is consist of microcontroller which has the function of A/D converter, programmable input/output timer, and the transfer table which has the values of optimal lead angle depending on motor velocity, and ROM which has the transfer table of the values of lead angle depending on velocity of motor and the values of instantaneous phase current at ${\pi}/2$. From the design of microcontroller-based controller, we minimize the external interface circuit and obtain flexibility by changing the contents of ROM transfer tables and the control software. We confirm that the designed controller drives the bifilar-wound hybrid stepping motor is the mode of optimal lead angle by comparing the instananeous phase current experimental results and computer simulation results.
오스테나이타이징 온도와 냉각 속도가 SCM415 저탄소강의 미세조직과 경도에 미치는 영향
이종언,이교명,차재원,박성혁 한국소성∙가공학회 2022 소성가공 : 한국소성가공학회지 Vol.31 No.4
In this study, variations in the microstructure and hardness of a low-carbon SCM415 steel with austenitizing temperature and cooling rate are investigated. When the austenitizing temperature is lower than the A1 temperature (738.8 ℃) of the SCM415 steel, the microstructures of both the air-cooled and water-cooled specimens consist of ferrite and pearlite, which are similar to the microstructure of the initial specimen. When heat treatment is conducted at temperatures ranging from the A1 temperature to the A3 temperature (822.4 ℃), the microstructure of the specimen changes depending on the temperature and cooling rate. The specimens air- and water-cooled from 750 ℃ consist of ferrite and pearlite, whereas the specimen water-cooled from 800 ℃ consists of ferrite and martensite. At a temperature higher than the A3 temperature, the air-cooled specimens consist of ferrite and pearlite, whereas the water-cooled specimens consist of martensite. At 650 ℃ and 700 ℃, which are lower than the A1 temperature, the hardness decreases irrespective of the cooling rate due to the ferrite coarsening and pearlite spheroidization. At 750 ℃ or higher, the air-cooled specimens have smaller grain sizes than the initial specimen, but they have lower hardness than the initial specimen owing to the increased interlamellar spacing of pearlite. At 800 ℃ or higher, martensitic transformation occurs during water cooling, which results in a significant increase in hardness. The specimens water-cooled from 850 ℃ and 950 ℃ have a complete martensite structure, and the specimen water-cooled from 850 ℃ has a higher hardness than that water-cooled from 950 ℃ because of the smaller size of prior austenite grains.
이동성 지원을 위한 JAIN 기반 SIP 시스템의 설계 및 구현
이종언,차시호,김대영,이재오,조국현,Lee Jong eon,Cha Si ho,Kim Dae young,Lee Jae oh,Cho Kuk hyun 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.3B
일반적으로 무선 환경에서의 이동성은 단말, 개인, 세션, 서비스 이동성의 네 가지로 구분 및 정의 될 수 있다. 이러한 이동성 중 단말 이동성 지원을 위하여 네트워크 계층에서의 모바일 IP(MIP) 기반의 해결 방안과 응용 계층의 SIP 기반 해결 방안이 제안되어 왔다. MIP는 삼각형 라우팅, 각 호스트의 홈 IP 주소의 필요, 터널링과 캡슐화에 따르는 오버헤드 등의 문제점이 존재하고, 실제 네트워크에서의 배치가 제한적으로 이루어지고 있다. 따라서, 본 논문에서는 하위 프로토콜에 독립적인 SIP 기반의 이동성 지원 개념을 제시하곤 계층적인 등록 구조를 지원하는 SIP 시스템을 설계한다. 그리고, 차세대 네트워크의 표준을 따르는 JAIN 기술 기반으로 멀티미디어 응용을 위한 시스템을 구현한다. 본 시스템은 ITU-T 의 권고 기준을 만족시킨다. Mobile IP(MIP) and SIP have been proposed to support mobility in the wireless internet working at different layers of the protocol stack. However MIP has some problems such as triangle routing, the need of each host's home address, the overhead of tunneling and the lack of wide deployment. Thus we proposed a scheme for supporting mobility based on SIP in this research. A novel SIP system to provide a hierarchical registration has been designed according to this scheme. Our SIP system has been established by implementing JAIN technologies which follow next generation network standards to support the mobility of wireless terminal. This system successfully satisfied ITU-T recommendation.
A Study on DNN-based STT Error Correction
이종언 한국인터넷방송통신학회 2023 International journal of advanced smart convergenc Vol.12 No.4
This study is about a speech recognition error correction system designed to detect and correct speech recognition errors before natural language processing to increase the success rate of intent analysis in natural language processing with optimal efficiency in various service domains. An encoder is constructed to embedded the correct speech token and one or more error speech tokens corresponding to the correct speech token so that they are all located in a dense vector space for each correct token with similar vector values. One or more utterance tokens within a preset Manhattan distance based on the correct utterance token in the dense vector space for each embedded correct utterance token are detected through an error detector, and the correct answer closest to the detected error utterance token is based on the Manhattan distance. Errors are corrected by extracting the utterance token as the correct answer.