http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
국내 미기록 수목흰가루병 기주식물 (寄主植物) 4 종에 대한 보고 - 벚나무 , 귀룽나무 , 푼지나무 , 물들메나무 흰가루병 -
이종규,김경희,이창근 ( Chong Kyu Lee,Kyung Hee Kim,Chang Keun Yi ) 한국산림과학회 1983 한국산림과학회지 Vol.60 No.1
The leaves and young shoots of several broad leaf trees infected with powdery mildew fungi were collected and observed for the purpose of seeking for the host plants and identifying its pathogenic fungi in the arboretum of Forest Research Institute, Seoul from October to November 1982. Of these, Prunus serrulata var. spontanea, Prunus padus, Celastrus flagellaris, and Fraxinus × chiisanensis were found out to be new host plants of powdery mildew fungi in korea. Morphological characteristics of imperfect state and perfect state of powdery mildew fungi on 4 new host plants were examined. These pathogenic fungi were identified as Podosphaera tridactyla, Uncinula sengokui, and Uncinula fraxini.
피로강도 및 수명에 미치는 Shot Peening에 의한 잔류응력의 영향
이종규,김정규,Lee, Jong-Gyu,Kim, Jeong-Gyu 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.9
Procedures are presented for influence of shot peening on fatigue strength, fatigue life and effects of shot peening are discussed from experiments were taken between shot peened and unpeened SPS5, SM45C specimens. After the residual stress on shot peened specimens was measured by X-ray diffractometer, rotating bending fatigue tests were carried out. In addition, the compressive residual stress profile was obtained by the superposition method of three stresses which is based on Al-Obaid's equation. Predicted fatigue life considering residual stress profile which was obtained by the Al-Obaid's equation and another predicted fatigue life considering residual stress profile which was measured in test were compared. For the purpose of predicting fatigue life, Morrow's equation considering the residual stress and mean stress was used.
천장크레인의 무인운전 시스템을 위한 운동제어 알고리즘 개발
이종규,박영조,이상룡,Lee, Jong-Kyu,Park, Young-Jo,Lee, Sang-Ryong 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.10
A search algorithm for the collision free, time optimal transport path of overhead cranes has been proposed in this paper. The map for the working environment of overhead cranes was constructed in the form of three dimensional grid. The obstacle occupied region and unoccupied region of the map has been represented using the octree model. The best-first search method with a suitable estimation function was applied to select the knot points on the collision free transport path to the octree model. The optimization technique, minimizing the travel time required for transporting objects to the goal while subjected to the dynamic constraints of the crane system, was developed to find the smooth time optimal path in the form of cubic spline functions which interpolate the selected knot points. Several simulation results showed that the selected estimation function worked effectively insearching the knot points on the collision free transport path and that the resulting transport path was time optimal path while satisfying the dynamic constraints of the crane system.
C<sub>3</sub>A-CaSO<sub>4</sub>·2H<sub>2</sub>O 계의 수화반응에 미치는 석회석 미분말의 영향
이종규,추용식,송훈,Lee, Jong-Kyu,Chu, Yong-Sik,Song, Hun 한국세라믹학회 2011 한국세라믹학회지 Vol.48 No.6
In this work, effects of limestone powder on hydration of $C_3A-CaSO_4{\cdot}2H_2O$ system was discussed based on the XRD Quantitative analysis, and the possibility of Delayed Ettringite Formation was also discussed. The early hydration of $C_3A$ was delayed by addition of $CaCO_3$ powder. The delay effect was enhanced by increasing of $CaCO_3$ content and finer powder of $CaCO_3$ addition. After consumption of $CaSO_4{\cdot}2H_2O$, the reaction of $CaCO_3$ is started. Delayed Ettringite Formation would take place because monosulfoaluminate is not stable in presence of $CaCO_3$. In order to prevent the delayed ettringite formation in $C_3A-CaSO_4{\cdot}2H_2O-CaCO_3$ system, the reduction of monosulfoaluminate formation is important. Therefore, by increasing the amount of $CaCO_3$ addition and finer $CaCO_3$ powder addition, the delayed ettringite formation can be prevented.
부분상태 궤환제어를 이용한 비선형 천정크레인의 진자각제어
이종규,이상룡,Lee, Jong-Kyu,Lee, Sang-Ryong 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.6
The purpose of this study is to design an anti-sway motion for industrial overhead cranes which transport objects on a horizontal plane by adjusting movements of a trolley motor and a girder motor. The movement of a hoist motor has not been considered at this time since its role was assumed to move objects only vertically, therefore, not to affect the swing motion of objects. The dynamic behavior of the swing motion shows nonlinear characteristics, which makes the design of anti-sway motion controller difficult. First of all, the nonlinear state equation for the motion of industrial overhead cranes has been derived. Then they have been linearized about normal operating states determined by the dynamic characteristics of motor motion-acceleration, constant speed, and deceleration, and deceleration, during transportation. The partial state feedback control algorithm based on this linearized state equation has been developed on order to suppress the swing motion. The simulation results have demonstrated satisfactory performance of the proposed controller.
이종규,김왕섭,김경용,Lee, Jong-Kyu,Kim, Wang-Sup,Kim, Kyeong-Yong 한국재료학회 1992 한국재료학회지 Vol.2 No.4
본 실험에서는 낮은 음의 온도계수를 갖는 저온 소결 유전체에 대해 연구하였다. 새로 개발된 재료의 조성은 Ti$O_2$(100-X) CuOx(X=1~5wt%)에 미량의 Mn$O_2$를 첨가 하였다. CuO를 첨가하지 않은 경우에는 저온 (90$0^{\circ}C$) 에서 소결이 진행되지 않았다. CuO 함량이 증가할수록 저온에서 소결이 가능하였으나, 유전율이 낮아지고 유전손실은 증가 하였다. Mn$O_2$를 0.6wt% 첨가한 경우 유전율과 Q값이 가장 높게 나타났다. Low-firing dielectric materials with negative small temperature coefficients were investigated. The newly developed materials are based on Ti$O_2$(100-x)/ CuOx(X=1~5wt%) with small amount of Mn$O_2$ additive. The sample without CuO was not sintered at 90$0^{\circ}C$. As CuO content was increased the sample could be sintered at low temperature. However, the dielectric constant was decreased and the dielectric loss was increased. In the case of adding 3wt% CuO and 0.6wt% Mn$O_2$, the dielectric constant and the Q values appeared very high.
이종규,추용식,송훈,Lee, Jong-Kyu,Chu, Yong-Sik,Song, Hun 한국재료학회 2011 한국재료학회지 Vol.21 No.12
One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The purpose of the present study was to investigate leaching properties of water-soluble hexavalent chromium by different manufacturing conditions of cement clinker. Raw materials were prepared to add different $SiO_2$, $Al_2O_3$ and $Fe_2O_3$ sources. After the raw materials, such as limestone, sand and clay, iron ore was pulverized and mixed, and the raw meal was burnt at $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. Leaching of soluble hexavalent chromium showed a tendency to decrease with an increasing LSF and IM. However, leaching of soluble hexavalent chromium increased with an increasing S.M. Alkali contents of iron source minerals is closely related to the leaching properties of soluble hexavalent chromium. Green sludge has the highest content of alkali added; leaching of water-soluble hexavalent chromium was mostly high. In order to reduce the water-soluble hexavalent chromium in cement, reducing the alkali content in raw materials is important.