http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
홍재화(J.H. Hong),강정수(J.S. Kang),정재인(J.I. Jeong),전인준(I.J. Jeon),이영백(Y.P. Lee) 한국진공학회(ASCT) 1992 Applied Science and Convergence Technology Vol.1 No.2
냉연강판의 성능은 그 표면 상태에 의해서 많은 영향을 받는다. Temper-color(T/C)층은 tempering 과정 중 형성되는 다양한 색깔의 얇은 산화층으로서, 우수한 표면 품질을 갖기 위해서는 방지 또는 제어되어져야 한다. T/C 현상을 이해하기 위하여 여러 가지 표면 분석방법이 동원되었다. 유백색 T/C층의 표면은 1 ㎛ 크기의 구형의 미세구조로 구성되어 있었다. 소둔과정 중 C, Si, Mn과 Al이 표면으로 농화됨을 알았고, Mn과 C은 정상시료에서 보다 T/C 시료에서 농화가 심하였다. T/C 시료에서의 산화층 두께는 정상시료의 60-100 Å 보다 매우 두꺼웠으나, 발생 정도에 따라 변화하였다. T/C층 내의 각 원소 산화 상태는, Si은 SiO₂의 상태로, Mn은 MnO나 MnO₂의 상태로 Fe는 극표면층의 Fe₂O₃ 상태를 제외하고는 metallic 상태로 분석되었다. The performance of the cold-rolled steel sheet is affected strongly by the surface conditions. Temper-colored (T/C) layer, which is the formation of a thin colored layer on the surface in the tempering process, is one of the phenomena which should be overcome to secure the improved surface quality. The layers were exposed to a variety of surface-analysis techniques for the characterization. The surface of milky-color T/C film consists of droplet-shaped microstructures in the size of around 1 ㎛. C, Si, Mn and Al are segregated to the surface during annealing. Mn and C are found to be more enriched at the surface of T/C sample than the normal one. The thickness of the oxide of T/C sample is much larger than the normal one of 60-100 Å, but varies in a wide range according to the degree of T/C. The oxidation state of Si in T/C film was analyzed to be SiO₂, and that of Mn to be MnO or MnO₂. On the contrary, Fe was metallic with Fe₂O₃ phase only at the extreme surface.