http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고받음각 오자이브의 비대칭 와류에 작용하는 구동기 효과 분석
이은석,이진익,이광섭,Lee, Eunseok,Lee, Jin Ik,Lee, Kwang Seop 한국군사과학기술학회 2013 한국군사과학기술학회지 Vol.16 No.5
The effect of the flow actuator on the asymmetric vortex structure around the ogive-cylinder body with fineness ratio of 4 flying at the speed of Mach 0.1 at angle of attack of 50 degree is studied. The ogive-cylinder model is developed with the actuator placed near the nose tip and numerically simulated using the in-house CFD code named KFLOW. The numerical simulation employs two different actuator modeling: one is the boundary condition given by blowing normal to the surface and another shearing on the surface. The numerical simulation reveals that response of the vortex structure to the actuation is dependent on the type of modeling as well as the strength and direction of the actuation.
이은석,조현경,Lee, Eun Seok,Cho, Hyun Kyung 국립문화재연구소 2010 문화재 Vol.43 No.4
경주 내남면 이조리에 소재하는 최진립신도비의 받침인 석제 귀부(龜趺)는 1740년경에 제작되었다는 기록이 있어 통일신라시대 귀부를 모사한 조선시대 작품으로 인식되었다. 그러나 당시 제작되는 귀부 형식과는 다르고, 모사한 원 귀부의 형식은 어느 곳에서도 찾을 수 없는 모습들이 확인되고 있다. 첫째, 제작 과정을 기록한 '문루일기(門樓日記)'에는 비석을 먼저, 이후에 귀부를 제작했음이 밝혀져 있다. 그러나 비좌 삽입부가 작아 비석 양쪽 끝단을 잘라 삽입한 흔적이 보이며, 비석의 크기를 고려하지 않고 귀부와 비좌를 만들었다는 것은 공정상에 이해되지 않는 부분이다. 또한 비석 제작 부분은 구체적으로 묘사되어 있으나, 백운대라는 사찰터에서 제작되었다고 할 뿐, 공정 내용이 언급되지 않은 점은 당시 실사를 하고 기록했는지 의심되는 부분이다. 둘째, 이조리귀부의 구름문양은 초기의 태종무열왕릉귀부와 서악리귀부 구름문에서 이행되는 시간상의 세리에이션(Seriation)을 잘 반영하고 있다. 비좌 주변을 장식한 연화문은 중앙에 형식화된 보상화가 표현된 것으로 통일신라시대 전성기인 8세기대 기와 등에 가장 잘 나타나던 문양이다. 셋째, 전진하는 모습의 이조리귀부는 지금까지 경주에 전해지는 귀부들에서도 찾기 힘든 생동감을 가지고 있으며, 일렬상의 귀갑문 배치는 이전 귀부의 문양 배치보다 훨씬 간결해지고 공간 활용을 고려한 발전된 형식으로 판단된다. 따라서 이조리귀부는 시기적 변화를 보여주는 문양 형식, 비신과 비좌의 불일치, 기록상의 고찰을 통해 볼 때, 18세기 조선시대 석공이 신라문양의 형식변화 등을 모두 고려하여 제작한 모사품이라기보다는 8세기 중반 경에 제작된 통일신라시대 귀부였음을 제시해 보고자 한다. The tortoise pedestal for the memorial monument of Choe Jin-rip(an army officer in the mid-Joseon Period) in Ijo-ri, Naenam-myeon, Gyeongju is known to have been made in 1740. As such, it was originally understood to be a Joseon imitation of a tortoise pedestal made in the Unified Silla Period. The style of the Ijori Tortoise Pedestal differs from other tortoise pedestals dating back to the same period, and bears no resemblance to the Unified Silla pedestals of which it is a copy. Mullu ilgi, a record of the production of the pedestal, explains that the monument was made before the pedestal. Traces show that the two sides of the bottom of the monument were cut off so that it would fit into the smaller space made on the pedestal. It is scarcely conceivable that they made the pedestal and the platform without considering the bottom size of the monument. The record only states that the monument was made at a temple site named Baegundae, without explaining the details of the production process. This leaves some doubt as to whether its production was undertaken systematically. The cloud patterns engraved on this pedestal look similar to the temporal seriation found on the Tortoise Pedestal of the Royal Tomb of King Muyeol and the Seoangni Tortoise Pedestal of Gyeongju. The lotus pattern decorating the square pedestal on the back of the tortoise is one of a number of patterns that were widely used on roof-tiles in the 8th century, the heyday of the Unified Silla Kingdom. The Ijori Tortoise Pedestal, which represents a tortoise moving forward, displays a liveliness the like of which is rarely found in its cousins remaining in Gyeongju. The layout of the patterns in a queue on the tortoise-shell looks much better schematized than those made at an earlier date. It also looks like a more developed form, with the use of space taken into account. Such factors as the style of the patterns, the incongruity between the monument and its pedestal, and what is stated in the historical record indicate that the Ijori Tortoise Pedestal of Gyeongju was made in the mid-8th century(i.e. during the Unified Silla Period), rather than in the Joseon Period(i.e. the 18th century), as an imitation of earlier ones, including changes in the style unique to the Silla Period.
홍채고정 유수정체용 인공수정체 삽입술 시행 후 각막 내피세포의 단기 변화
이은석,조영재,김응권,Eun-Suk Lee,M,D,Young-Jae Cho,M,D,Eung-Kweon Kim,M,D 대한안과학회 2005 대한안과학회지 Vol.46 No.3
Purpose: To investigate endothelial change in phakic eyes implanted with Artisan phakic IOL inserts and to identify the associated factors. Methods: We prospectively examined the endothelial change in 11 phakic eyes implanted with Artisan phakic IOL inserts. Noncontact specular microscopy was performed preoperatively, and at 1 week and 1 month postoperatively. Results: The mean endothelial cell loss was 3.57% at 1 week, and 4.69% at 1 month. There was a statistically significant decrease in endothelial cell density and an increase in pleomorphism and polymegathism of the cells after the surgery which indicate cellular damage (p<0.05). There were no statistically significant changes in endothelial cell density, shape, or size between 1 week and 1 month postoperatively (p>0.05). No correlation was observed between cell loss and corneal curvature, critical distance, IOL optic size, IOL diopter, or serial order of the operation. However, there was significant negative correlation (R=-7.600; p>0.05) between cell loss and anterior chamber depth. Conclusions: Endothelial damage occurred primarily during the surgical procedure and special attention should be given to patients with shallow anterior chamber depth for iris-fixed phakic IOL inserts to avoid unintended endothelial damage.
스트론티움을 포함하는 페롭스카이트형 페라이트의 화학적 , 물리적 성질에 관한 연구
이은석,여철현 ( Eun Seok Lee,Chul Hyun Yo ) 한국공업화학회 1993 공업화학 Vol.4 No.2
1473K, 대기압하에서 Sm_(1-x)Sr_xFe^(3+)_(1-t)Fe^(4+)_tO_(3-y) (0.00≤x≤1.00) 페라이트계에 대하여 균일상의 시료를 제조하였다. x값의 증가에 따라 Fe^(4+) 이온의 양이 증가하였으며 결정학적 구조는 orthorhombic에서 cubic으로 변화함을 알 수 있었다. Fe^(4+) 이온의 증가에 따라 일정온도에서의 전기전도도는 급격히 증가하며, 활성화에너지는 감소한다. x=0.00 시료의 Mo‥ssbauer spectrum은 six-line 형태를 보이며 팔면체 자리에 Fe^(3+) 이온이 존재함을 확인시켜 주었다. At 1473 K under atmospheric pressure, the homogeneous samples of the Sm_(1-x)Sr_xFe^(3+)_(1-t)Fe^(4+)_tO_(3-y) (0.00 ≤x≤1.00) ferrite system were prepared. With the increase in x value, the amount of Fe^(4+) ion increased and the crystallographic structure was changed from orthorhombic symmetry to cubic symmetry. The electrical conductivity at constant temperature sharply increases and the activation energy decreases with the increase of Fe^(4+) ion, Mo¨ssbauer spectrum of the sample x=0.00 shows six-line pattern indicating the presence of Fe^(3+) ion in the octahedral sites.
이은석,이진구,Lee, Eun-Seok,Lee, Jin-Goo 한국정보처리학회 2001 정보처리학회논문지 C : 정보통신,정보보안 Vol.8 No.6
인터넷상에서의 전자상거래의 중용성과 복잡성이 증가함에 따라 상거래과정을 통해 소비바와 공급자 양쪽을 다 효율적으로 지원할수 있는 지능형 소프트웨어 에이전트에 대한 관심과 요구가 급속도가 늘어나고 있다. 이러한 에이전트를 기반으로 한 지능형 전자상거래를 실현하기 위해서는 상품정보의 표준적 온토로지의확립. 메시지 교환 및 교섭을 위한 포로토콜의 정의와 중계기술의 기반기술을 바탕으로 다 중에이전트기반의 전자상거래시스템이 필요하다. 본 논문에서는 에이전트 기반의 전자상거래를 위한 개방형 기반구조의 하나로 지능형 전자상거래시스템,. ICOMA를 제안한다. 구체적으로 6종류의 에이전트기반의 전자상거래시스템의 구보와 에이전트간 상호교섭 및 상호 통신을 위한 포로토콜, 개인적응형 상품검색 및 필터링 기능을 제안, 설계, 구현하였고, 실험을 통해 그 유효성을 확인하였다. With the increasing importance and complexity of EC (Electronic Commerce) across the Internet, the need and expectation for intelligent software agents to support both consumers and suppliers through the whole process of EC are growing rapidly. To realize the intelligent EC. a multiagent based EC system. which includes foundational technologies such as the establishment of standard product ontology the definition of message and negotiation protocol and brockering, is required. In this paper we propose an intelligent EC System named ICOMA(Intelligent electronic CO mmerce system based on Multi-Agent) as an open infrastructure of multiagent-based EC. Concretely we have proposed. designed and implemented an architecture of multiagent-based EC system including 6-types of agents message protocol for inter-agent negotiation, personalized produst retrieval and filtering., We have confirmed the effectiveness of the system through experiments.
이은석,고경호,허윤혁,박찬진,조리라,Lee, Eun-Suk,Ko, Kyung-Ho,Huh, Yoon-Hyuk,Park, Chan-Jin,Cho, Lee-Ra 대한치과보철학회 2016 대한치과보철학회지 Vol.54 No.4
시멘트유지형 임플란트 보철물은 교합과 심미적인 측면에서 상당한 장점을 가지지만 시멘트잔사가 남을 경우 임플란트주위염을 유발하는데 대부분 후기 증상으로 발현되며 특히 제거의 어려움과 시멘트잔사로 인한 임플란트주위염은 임플란트의 예후를 위협하는 요인이 될 수 있다. 그러므로 사용목적에 맞는 유지력을 가지는 시멘트를 선택하는 것이 필요하다. 일반적으로 레진시멘트, 폴리카복실레이트시멘트, RMGI 시멘트가 GI 시멘트나 ZPC보다 높은 유지력을 가지며 임시합착제는 열순환 후에는 유지력이 낮아진다. 시멘트 외에도 지대주의 높이와 경사도, 지대주의 수 및 분포도 유지력에 영향을 줄 수 있다. 무엇보다 목적에 맞는 시멘트를 선택하고 생역학적인 원칙을 준수한 보철물을 설계하고 시멘트잔사를 줄이는 방법을 이용하여 합착한 후 방사선사진으로 잔사를 확인하여 완벽하게 제거해야 시멘트유지형 보철의 성공을 얻을 수 있을 것이다. Cement-retained implant prosthesis has several advantages in the esthetic and occlusal aspects. However, the difficulty of the retrievability and the possibility of peri-implantitis induced by the cement excess would be a threatening factor to the implant prognosis. Peri-implantitis resulting from the remaining cement could occur later on to the patients with periodontitis history. Retention can be controlled by selecting the right cement type. Retention of the cement was the strongest in the resin cement, followed by resin modified glass ionomer cement, poIycarboxylate cement, zinc phosphate cement and glass ionomer cement. Retention of the provisional cement weakened after thermocycling. Other factors such as the abutment number, abutment alignment, height and taper of the abutment can also affect the total retention. To the success of the cement-retained prosthesis, it's important to select the right cement for the clinical purpose. The prosthesis should be fabricated in accordance with the biomechanical requirements. The prosthesis should be cemented with the techniques to reduce the excess cement as much as possible. In addition, the excess cement should be identified using the radiography and carefully removed.
그린인프라스트럭처의 의미구조 - 기존문헌의 정의문 분석을 중심으로 -
이은석,노초원,성종상,Lee, Eun-Sek,Noh, Cho-Won,Sung, Jong-Sang 한국조경학회 2014 韓國造景學會誌 Vol.42 No.2
최근 한국 조경분야는 도시 물 순환능력회복을 위한 새로운 개념적 대안으로 그린인프라스트럭처(GI)를 제안하고 있다. 이러한 맥락에서 본 연구를 통해 그린인프라스트럭처의 본질적 의미를 고찰하고자 한다. 연구의 방법은 인터넷 검색과 학술지 데이터베이스 문헌수집과정을 통해 최근 5년간 발간된 47편의 해외 학술지논문을 선별하고 분석하였다. 각 논문에서 연구에 활용한 그린인프라스트럭처의 정의문을 대상으로 분석하였으며, 각 문장에 포함된 동사와 목적어의 의미구조를 통해 해석하여 5대 목적성, 4대 대상요소, 3대 계획공간의 유형을 파악하였다. 5대 목적성은 '제공', '개선', '생산', '보전', '저감'이며, 4대 대상요소는 '인문', '환경', '생태', '수문'이다. 3대 계획공간은 '도입할 수 있는 대상이 되는 공간', '기술적으로 활용이 가능한 공간', '도입대상이 될 수 있으면서, 기술적으로 활용이 가능한 공간' 등이 해당한다. 각각의 대상 요소들은 목적성에 단수 혹은 2~3개가 직접 연결되며, 이는 그린인프라스트럭처의 본질적 의미연결망이다. 종합적으로 조경계획과 도시계획 수립에 활용가능 한 의미연결망의 수는 83개가 있음을 도출하였다. Green Infrastructure(GI) is suggested to recover urban water circulation system as a newly conceptual alternative methodology by Korean landscape field in recent years. In this context, the study considers the essential meaning of GI. The methodology of this study is literature review with 47 published papers which were peer-reviewed in international journals in the recent 5 years. These papers were collected from online database and academic archives. The main analysis targets are definition sentences about GI. The each sentences were interpreted by semantic structure between verbs and objects in the definition sentences. As the results, it figured out 5 aims('Provide', 'Improve', 'Produce', 'Conserve', 'Reduce'), 4 objects('Humanistic', 'Environmental', 'Ecological', 'Hydrological') and 3 spaces('Object space', 'Technically available spaces', 'Object or technically available spaces'). The '5 aims' connected with the elements of '4 objects' based on the '3 spaces'. The elements was connected to the '5 aims' via single form or 2~3 forms of the essential meaning networks of GI. The study provides 83 meaning networks to use landscape architecture planning and urban planning.
(Sr,M)FeO<sub>3-y</sub>계(M=Ca)의 화학적 성질과 열분석에 대한 연구
이은석,Lee, Eun-Seok 한국공업화학회 1997 공업화학 Vol.8 No.6
$Sr_{1-X}M_XFeO_{3-y}$ 계에서 (M=Ca), x=0.1, 0.2, 0.3, 0.4, 0.5에 대응하는 페로브스카이드계 고용체를 공기중, 1473K에 18시간 동안 열처리하여 합성하였다. X-선회절분석 결과 모든 고용체는 단순 입방정계를 나타내며, x=0.3까지는 x값의 증가에 따라 단위세포의 부피가 감소하고, x=0.4 이후에는 급격히 증가한다. 모어염 분석에 의하여 각각의 조성에 대한 $Fe^{4-}$ 이온의 몰비($\tau$값), 산소공위의 양(y값) 및 비화학양론적 화학식을 결정하였다. TG/DTA 실험(온도범위:300~1173K) 결과 x=0.1, 0.2인 시료는 3-y값이 감소하며, 냉각시 3-y값이 거의 가역적인 증가 경향을 보였다. $x{\geq}0.3$인 시료는 가역적인 무게의 변화를 보이지 않았으며, 냉각과정에서 3-y값은 거의 2.5를 유지하였다. 상대적으로 낮은 온도범위에서 모든 시료의 전기전도도 값은 반도성 범위에서 변화하였다. 그리고 일정한 온도에서의 전도도는 x값의 증가에 따라 감소하였다. 본 훼라이트 계의 전도도 메카니즘은 혼합원자가 상태 사이의 전도성 전자의 건너뜀 모형으로 제안할 수 있을 것이다. 고온에서 각 시료의 전도성은 금속성으로 변화하였다. The solid solutions of the $Sr_{1-X}M_XFeO_{3-y}$ (x=0.1, 0.2, 0.3, 0.4, 0.5, M=Ca) system having perovskite structures were prepared in air by heat treatment at 1473 K for 18hr. X-ray diffraction assigns cubic system for all the samples and shows that the lattice volume of each system decreases with increasing x value until x=0.3, but increases abruptly from x=0.4. The mole fractions of $Fe^{4+}$ ion($\tau$ value), the amounts of oxygen vacancy (y value) and finally nonstoichiometric chemical formulas for each composition were determined from Mohr salt analysis. TG/DTA thermal analysis (temperature range: 300~1173K) exhibits that 3-y values of the samples having x=0.1 and 0.2, decrease with temperature and increase almost reversibly with decreasing temperature. The samples of $x{\geq}0.3$, however, didn't show the reversible weight change and the 3-y values of them were nearly 2.5 in cooling process. Conductivities of each sample were varied within the semiconductivity range at relatively low temperature. And the conductivity at constant temperature decreases steadily with x value. The conduction mechanism of this ferrite system may be proposed as a hopping model of conducting electrons between the mixed valence states. At high temperature semiconductivity of each sample changed into metallic property.
국내 주제도를 이용한 VITD 생성방안연구 : 군 지형분석지도를 중심으로
이은석,김종배,Lee, Eun-Seok,Kim, Jong-Bae 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.9
군 현장에서 국내의 여러 주제도를 활용하고자 하는 시도들이 있었지만, 군 지형분석지도의 속성데이터 타입은 DIGEST의 FACC를 사용하고 있어 다른 타입의 속성코드를 가진 국내 주제도를 활용하는 것에 한계가 있었다. 따라서 본 연구에서는 미군의 MIL-PRF-89040 문서에 기반을 둔 데이터 속성인 FACC를 분석 하였고 우리나라에서 제작하여 사용되고 있는 국내 주제도의 속성코드를 FACC에 맞게 변경하여 VITD를 생성하였다. 이 결과를 실제 활용 할 수 있는지 검증하기 위해 FM 5-33에 정의된 야지기동로 분석에 적용해 보았다. 적용 결과, 본 연구에서 제시한 방법이 야지기동로 확보에 유용함을 확인하였고, 이는 향후 국내 주제도를 이용한 군 지형분석지도 제작뿐만 아니라, 긴급 수송을 위한 임도 확보 등에 활용이 가능하다는 것을 의미한다. There were a lot of attempts in the army to use various domestic thematic maps, but attribute data types of military topographic analysis maps use the FACC of DIGEST, so there is a limit in employing domestic thematic maps with different types of attribute codes. Therefore, this study analyzed the FACC as a data attribute based on the MIL-PRF-89040 of the US Army. Then, VITD was created by changing the attribute codes of domestic thematic maps produced in Korea to fit the FACC. Lastly, it was applied to the analysis of cross-country movement for maneuver defined in FM 5-33 in order to verify if it is applicable in practice. As a result, it was found that the suggested method was helpful in securing the cross-country movement for maneuver. This means that this method can be used not only in producing military topographic analysis maps using domestic thematic maps but in constructing emergency transport routes roads to transport by-products of forest in future.