地域 平生敎育 活性化를 위한 네트워크 構築 方案

이영준 전주대학교 2001 국내석사

Small municipalities and communities lack adequate legal or regulatory foundations to build and utilize networks. They have rudimentary ideas of lifelong education, however are in needs of research to build networks for lifelong education. This research looks at the ways to build the networks that will promote local lifelong education. Towards this end, it will address the following objectives. Firstly, it will study the academic principles on networks for lifelong education. Secondly, it will look into the network systems in nations, municipalities and provinces. Thirdly, it suggests how the lifelong network can be built in municipalities and gun regions. The research went through the following steps for above objectives. Firstly, the research involved outlining the concept of networks for lifelong education through gathering information on network architecture, procedure and the history of development. The sources of information were documentations on components of networks, public reading and hearing transcripts, conference materials, books, almanac of lifelong education and encyclopedia. Secondly, the research reconfigures network systems to service the objective and functions of organizations for the state-supported and regional lifelong education centers. Thirdly, building regional networks will be based on the case of co-ops for Women's social educational institutions and organization in the city of Namwon. This research came to the following conclusions, Firstly, the national or regional lifelong education networks must be built with consideration for the exchanges, sharing, Integration and multi-dimensional use of human and other resources. Secondly, the networks for lifelong education should be built to maximize the national system of and to ensure the rights to learn (Article 3 of the basic educational law) and the principle of lifelong education (Article 4 of the lifelong education law) are implemented. The network systems should be consolidated and restructured with the emphasis on lifelong educational institutions. Thirdly, to establish the nation-wide lifelong education system, financial and regulatory assistance should be in place and implemented via the lifelong educational facilities. The financial and regulatory aids should m(let the particular needs of a region.

저온환경에서 타설되는 구조체 콘크리트의 등가재령 방법을 활용한 설계기준강도 확보기법

이영준 청주대학교 2020 국내석사

본 연구에서는 콘크리트의 배합강도 결정 시, 저온조건하 평균양생온도 저하에 따른 강도증진 지연에 대한 대응방안으로 보정값을 제안하고자 하였다. 이를 위해 실무에서 많이 사용하는 W/B 50 %의 일반강도 영역에서 OPC 콘크리트, FAC 콘크리트 2종, BSC 콘크리트 2종, 3성분계 시멘트 콘크리트에 대하여 등가재령 방법을 활용한 해석모델로 강도증진을 해석하고, 관리재령별 평균양생온도 저하에 따른 보정값 Tn를 제안하고자 하였다. 그 결과를 요약하면 다음과 같다. 1) 콘크리트의 종류별 민감도 계수를 도출하기 위해 ASTM C 1074에서 제시한 방법을 활용하여 반응속도상수와 겉보기활성화에너지를 도출하였고, 콘크리트 종류별 등가재령을 산정할 수 있었다. 2) 등가재령 방법을 활용한 log 함수모델과 분수함수 모델로 강도 증진을 해석한 결과 OPC, FAC, BSC, 3성분계 시멘트 콘크리트에서의 결정계수 R2 값이 분수함수 모델에서 높은 결과를 나타내었다. 따라서 log 함수모델보다 분수함수 모델로 강도증진을 해석하는 것이 보다 정확한 강도추정 결과를 나타낼 것으로 판단된다. 3) 등가재령을 활용하여 해석한 분수함수 모델로 재령 28일, 42일, 56일, 91일에서의 평균양생온도에 따른 압축강도를 추정하였고, 이때 재령 28일의 표준조건에서의 압축강도와의 차이를 보정하기 위한 단계별 기온보정강도 Tn을 3 MPa 단위로 제안하였다. 4) 단계별 기온보정강도는 OPC, FAC, 3성분계 콘크리트의 경우 재령 28일에서 0~17℃에서는 3 MPa, BSC 콘크리트는 10~17℃에서 3 MPa, 3~10℃에서 6 MPa, 0~3℃에서 9 MPa를 보정해야 하는 것으로 나타났다. 5) 관리재령 42일, 56일의 경우 3 MPa만 보정해야 하며, 91일에서는 강도보정이 필요 없는 것을 알 수 있었다. 이상을 종합하여 제안된 시멘트 종류별 평균양생온도에 따른 기온보정강도 Tn을 국가건설기준 통합코트의 배합설계 단계에 포함한다면 저온조건하 외기온에 대한 양생온도 저하에도 구조체 콘크리트의 설계기준강도를 확보할 수 있을 것으로 판단된다. In this study, when determining the design strength of concrete, a correction value was proposed as a countermeasure to the delayed strength enhancement due to the reduction of the average curing temperature under cold conditions. For this purpose, the strength enhancement was interpreted as an analytical model using equivalent age method for ordinary portland cement(OPC) concrete, fly ash cement(FAC) concrete type 2, blast furnace slag cement(BSC) concrete type 2, and ternary blended concrete in the normal strength area of 50 % of W/B, which is commonly used in practice, and the value of Tn was proposed according to the mean curing temperature of each management age. In summary, the results are as follows. (1) To derive the sensitivity factor by type of concrete, the methods presented in ASTM C 1074 were used to derive the reactive velocity and apparent activation energy, and equivalent age by type of concrete could be calculated. (2) The analysis of strength enhancement with log function model and fraction function model using equivalent age method showed that the determination factor R2 value in OPC, FAC, BSC, and three-component cement concrete had high results in the fraction function model. Therefore, it is judged that the analysis of strength enhancement with the fraction function model rather than the log function model will result in a more accurate estimation of strength. (3) The compressive strength according to the mean curing temperature at 28 days, 42 days, 56 days, and 91 days was estimated by the model of the fractional function analyzed using equivalent age, and the step-by-step temperature correction strength Tn was proposed in 3 MPa to compensate for the difference from the compressive strength under the standard conditions of 28 days of age. (4) The temperature correction strength for each step was found to be 3 MPa for OPC, FAC, and ternary concrete at 0~17°C from 28 days of age, 3 MPa for BSC concrete at 10~17°C, 6 MPa for 3~10°C, and 9 MPa at 0~3°C. (5) Only 3 MPa should be calibrated for the management age of 42 days and 56 days, and 91 days showed that strength calibration is not required. Hence, If the strength correction factors with temperature level Tn are included in the mix design of Korea Construction Standards Center depending on the average curing temperature of each type of cement presented, it is deemed that the design standard strength of structural concrete can be secured even if the curing temperature decreases.

무혈청 규정 배지를 이용한 자궁경부암 세포주 배양에 관한 연구

이영준 서울대학교 대학원 1989 국내석사

성인남성에서 알콜섭취가 비만지수와 혈중지질 및 관련질병이환에 미치는 영향

이영준 동국대학교 대학원 2002 국내석사

Objective Drinking alcohol is regarded as a part of life by adult men in these days. The purpose of this study is to investigate the differences and relationships of the obesity index, blood lipids level, and disease morbidity according to the duration or quantity of alcohol intake. Methods and Materials 291 persons were divided into four groups. 1. A group of non alcohol drinkers(41 persons) 2. A group of mild alcohol drinkers(128 persons, daily mean alcohol intake 12g) 3. A group of moderate alcohol drinkers(86 persons, daily mean alcohol intake 12g, 40g) 4. A group of severe alcohol drinkers(36 persons, daily mean alcohol intake 40g) Results and Conclusion 1. The prevalence of alcohol drinking reached 85.9% in the study groups. The period of time during which drinking occured was 15.6 years, and the daily mean alcohol intake was 17.9g. 2. BMI, Percent of body fat and WHR showed an increase with statistical significance relative to daily mean alcohol intake. 3. BMI, Percent of body fat and WHR increased significantly for four groups(BMI pO.01, Percent of body fat pO.05, WHR pO.01) 4. S-GOT, -GT, T. Cholesterol and Triglyceride showed an increase with statistical significance relative to daily mean alcohol intake. 5. S-GOT, S-GPT and -GT increased significantly for four groups(S-GOT pO.05, S-GPT pO.05, -GT pO.O1) but Triglyceride was only increased significantly in blood lipids level(TG p0.01). 6. Obesity, Central Obesity, Hyper cholesterolemia and Hyper triglyceridemia showed an increase with statistical significance relative to daily mean alcohol intake. 7. The Odds ratio estimate of relative risk of Central Obesity, Hyper triglyceridemia, Alcoholic liver diseases for severe alcohol drinkers related to non alcohol drinkers was 2.73, 7.40, 3.15 respectively.

전이성 B16F10 흑색종 모델에서 동종 종양세포 항원을 탑재한 수지상세포 백신의 면역치료 효과

이영준 서울대학교 대학원 2003 국내박사

Exfoliation-restacking route to anatase-layered titanate nanohybrid with house of cards structure

이영준 서울大學校 大學院 2004 국내석사

人蔘赤腐病菌의 培養에 關한 榮養生理的 硏究

이영준 東國大學校 1968 국내석사

유소년 축구지도자의 서번트 리더십에 따른 집단 응집력 및 집단 효능감이 선수 만족에 미치는 영향

이영준 중앙대학교 대학원 2018 국내석사

본 연구는 유소년 축구지도자의 서번트 리더십, 집단 응집력, 집단 효능감 그리고 선수 만족 간의 관계를 살펴보고 지도자의 서번트 리더십이 선수 만족에 미치는 영향과 집단 응집력 및 집단 효능감이 서번트 리더십과 선수만족 간의 매개효과를 검증하고자 하였다. 본 연구 대상은 2018년 대한축구협회에 등록되어 있고, 수도권 내에 위치한 초등학교 남자 축구선수 5, 6학년 대상으로 자료를 수집하였다. 표집방법은 표본추출법을 사용하여 총 303명의 선수들을 조사대상자로 설정하였으며 303부를 회수하였다. 그 중 불성실한 답변을 한 16부를 제외 하고 분석 가능한 287명의 자료를 사용하였다. 본 연구의 자료는 SPSS 23.0과 Mplus 7 프로그램을 사용하여 기술 통계, 상관분석, 구조방정식 모형검증을 비롯하여 매개효과 검증 분석을 실시하였다. 분석결과 다음과 같은 결론을 도출하였다. 첫째, 서번트 리더십은 선수 만족에 유의한 영향을 미쳤다. 둘째, 서번트 리더십은 집단 응집력을 매개로 선수 만족에 유의한 영향을 미치지 않았다. 셋째, 서번트 리더십은 집단 효능감을 매개로 부분적으로 선수 만족에 영향을 미쳤다. 넷째. 서번트 리더십, 집단 응집력, 집단 효능감, 선수 만족 4개의 변인 모두 상관관계를 나타냈다. 결과적으로 본 연구를 통해 서번트 리더십은 선수 만족에 직접적인 영향과 집단 효능감을 매개로 간접적인 영향을 미쳤고 선수 만족을 증진 시키는데 효과적인 리더십이라고 할 수 있다. The purpose of this study is to first examine the relationship between servant leadership, group cohesiveness, and collective efficacy of youth soccer coaches and athlete satisfaction and then, to examine the effects of coaches' servant leadership on athlete satisfaction, and the mediating effect of group cohesiveness and collective efficacy between servant leadership and athlete satisfaction. The subjects of this study were male soccer players in 5th and 6th grade of elementary schools in Seoul metropolitan area and also registered in the Korea Football Association in 2018. A total of 303 athletes were selected as sample subjects using sampling method, and 303 copies were collected. Among these responses, 287 respondents' data were used after excluding 16 responses that were not answered properly. The data of this study were analyzed by mediating effect analysis including descriptive statistics, correlation analysis, structural equation modeling, using SPSS 23.0 and Mplus 7 programs. The results of the analysis are as follows. First, servant leadership had a significant effect on athlete satisfaction. Second, servant leadership did not have a significant effect on player satisfaction with group cohesiveness as mediation. Third, servant leadership influenced athlete satisfaction partially with collective efficacy as mediation. Fourth, all four variables including servant leadership, group cohesiveness, collective efficacy, and athlete satisfaction were all correlated. In conclusion, servant leadership had both direct influence and indirect influence with collective efficacy as mediation on athlete satisfaction and group efficacy. Therefore, it can be said that it is an effective form of leadership to improve athlete satisfaction.

Richtmyer-Meshkov instability and computational magnetohydrodynamics simulator in inertial confinement fusion

이영준 중앙대학교 대학원 2016 국내석사

핵융합 발전의 가능한 방법중 하나로 제안된 관성핵융합 연구는, 처음 아이디어가 제안된지 30년이 넘는 시간에도 불구하고 아직 효율적, 효과적인 에너지 생산을 이루어내지 못하고 있다. 이는 그동안 제안된 이론적 모형들이 여러 비선형적 물리 현상을 정확히 표현해내지 못 했기 때문이며, 이 모형들에 대한 시뮬레이션이나 실험에 소비되는 비용이 굉장히 크기 때문이다. 따라서 이 논문에서는 GPU 상의 범용계산 기술과 Hadoop 데이터마이닝 기법을 이용한 쉽고 저렴하며 탄력적인 새로운 자기유체역학 시뮬레이터를 제안한다. 또한, 관성핵융합 영역에서의 가장 큰 쟁점인 유체역학 불안정성, 특히 Richtmyer-Meshkov 불안정성에 대한 FLASH code 시뮬레이션 결과를 통해 불안정성의 시간에 따른 증가율과 다른 물리 변수들에 관한 상관관계에 대한 연구를 진행하였다. Albeit the inertial confinement fusion (ICF) research had proposed as the one of the most possible solution to produce nuclear energy in 1970s at Lawrence Livermore National Laboratory (LLNL), effective and efficient energy production of ICF have not been realized until today. This is because of that several models are failed to explain nonlinear effects on ICF, and studying on ICF demands high experimental- or computational-costs. In this thesis, by taking a power of modern computational techniques-GPGPU and Hadoop clustering, a novel method to compute magnetohydrodynamics in a low-cost computational environment is proposed. Also, the one of the most demanding issues in ICF community, hydrodynamic instability, especially on Richtmyer-Meshkov instability studies conducted via FLASH code. This simulation results shows several relations between some physical quantities and instability growth rate.

소결 버너에서 설계 인자에 따른 연소 특성 연구

이영준 부산대학교 2011 국내석사

The objective of this study is to investigate the combustion characteristics of dual type of sintering burner as a function of design parameters using lab-scale sintering burner through experimental and numerical approaches. Combustion characteristics were evaluated by the radical method. The numerical model was verified as a temperature using R type of thermocouple at the bed surface. The effect of nozzle distance and angle were performed through the CFD analysis, and the comparison of burner types. As a results, dual type burner has more wider and uniform flame distribution than single type burner. Asymmetry and 45 degree angle condition have been suggested as an optimal condition for the ignition of the sintering bed surface.