http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
李永臣 충남대학교 공업교육연구소 1983 論文集 Vol.6 No.1
General solutions for linear theory of orthotropic cylindrical shells (vessels) are presented for Flu gge and Donnell type orthotropic shell eguations. The results of calculations of displacements, stresses corresponding to line loadings along generator of simply supported thin-walled orthotropic circular cylindrical shell (pressure vessels) are presented for various shell geometries. These loads (along generator segments) consist of a uniformly distributed radial load, symmetric with respect to a generator midpoint; a piecewise uniformly distributed radial load, anti-symmetric with respect to the same point; and a symmetric uniformly distributed moment loading. Thus, the loads are statically equivalent to a concentrated radial force and to concentrated axial and circumferential bending moments applied at the midpoint of generator. The solutions based on Donnell-type equations agree well with Flugge equations in case of short shells.
심음구분을 위한 어트랙터 구성방법이 프랙탈 차원에 미치는 영향
이영신,김혜영,김태식 대한의료정보학회 2004 Healthcare Informatics Research Vol.10 No.2
Strange attractor can be constructed from time series data such as heart sound. In the areas of the recognition and diagnosis of abnormal heart sounds, signal presentation method is very useful because good features can be detected from good presentation. This paper examines efficiency in diagnosing abnormal heart sounds of the two different methods for constructing attractor. Nine different heart sounds from typical clinical conditions were used for this study. The first method was constructing attractors using original heart sounds, and the second was modifying the original sounds by autocorrelation and they were then applied to the orignal sounds as to cross correlation checks. Attractors could be constructed using signals generated by these methods, and values of fractal dimensions would then be calculated which has been a well known method to measure characteristics of attractors. The results showed that the second method appeared to provide more efficient way to correctly classify abnormal heart sounds.
엔진 다이나모 시험기 베드 구조물의 진동 및 구조응력해석
이영신,강이석,김동진,김영대,김의석 한국전산구조공학회 1998 전산구조공학 Vol.11 No.3
본 연구에서는 자동차엔진 및 트랜스미션 성능시험을 위한 다이나모 베드구조물을 분석하고 설계하였다. 해석상에 고려된 베드구조물은 Ⅰ형강 구조물, 보강된 박스구조물 그리고 블록구조물로 제작되었으며, 시험을 위한 엔진 및 트랜스미션은 베드상판에 장착된다. 엔진구동시 회전에 의한 진동이 발생된다. 공진을 피하기 위해 베드구조는 충분한 구조적 일체성을 가져야 한다. 본 연구에서는 베드 구조물의 응력, 변위 그리고 자유진동해석이 ANSYS Code를 이용한 유한요소해석이 수행되었다. Ⅰ형강 구조형 베드 구조물에서 최대 응력은 23.2MPa에서 90.3MPa까지 나타났으며, 최대 처짐은 0.25㎜에서 0.92㎜까지 나타났다. 박스 구조형 베드 구조물에서 최대 응력은 0.028MPa에서 0.259MPa까지 나타났으며, 최대 처짐은 0.031㎜에서 0.413㎜까지 나타났다. 그리고 박스구조형 베드 구조물에서 최대 처짐은 0.92MPa에서 2.15MPa까지 나타났으며, 최대 처짐은 1.1㎜에서 2.7㎜까지 나타났다. 모든 구조물이 응력과 처짐 값에서 매우 안정적인 범위 내에서 발생됨을 볼 수 있었다. 구조진동해석에서 Ⅰ형강 베드구조물의 고유진동수는 112.03㎐에서 141.66㎐까지의 범위에 발생되었다. 박스 구조형 베드구조물에서의 고유진동수는 396.93㎐에서 755.11㎐까지의 범위에서 발생되었다. 마지막으로 블록구조형 베드구조물에서는 266.51㎐에서 244.67㎐까지의 고유진동수를 찾을 수 있었다. 모든 구조물에서 베드구조물의 무게증가에 따른 기본진동수는 증가된다. 베드시스템의 지지기초시스템은 2자유도계 시스템으로 설계되었으며, 다양한 질량변화 및 스프링상수 변화에 따른 진동해석을 수행하였다. 질량비가 증가될수록 고유진동수는 크게 감소되며, 스프링상수가 증가될수록 고유진동수는 감소된다.
이영신,최창,전병희,오재문,Lee, Young-Shin,Choi, Chang,Jun, Byoung-Hee,Oh, Jae-Moon 한국전산구조공학회 1997 전산구조공학 Vol.10 No.3
본 연구에서는 ANSYS와 ABAQUS 상용 유한요소 코드를 이용하여 궤도차량의 정적.동적 해석을 충격하중과 주행하중에 대해서 수행하였다. 궤도차량이 충격하중을 받을 때 최대 동적 Von Mises응력은 상판의 빔보강재와 레이스링사이에서 발생하였으며 응력수준은 390-450MPa이다. 정하중에 대한 동하중수 1.6을 고려했을 경우 동적 해석과 동적하중계수가 포함된 정하중 해석은 유사한 결과를 보이고 있다. 과도응력은 주로 레이싱링 주위에서 발생하고 있다. 주행하중의 경우 최대응력은 로드휠 유기압 현가장치 #1번에서 450MPa정도이며, 정적해석과 비선형 해석의 결과가 유사하다. In this study, static and dynamic transient analysis of tracked vehicle structure with recoil impact load is performed for transient impact and traveling load using ANSYS and ABAQUS FEM codes. When transient impact loads are applied at tracked vehicle, the maximum dynamic Von Mises stress occurs between beam stiffener of upper plate and race ring and stress level is about 390-450 MPa. The results of transient analysis shows similar level and tendency with static stress with dynamic force effect of 1.6. The excessive stresses occur around the race ring for the both cases. When the traveling loads are applied on the tracked vehicle, the maximum Tresca stress occurs around suspension #1 and is about 450 MPa and results of static and nonlinear transient analysis are quite similar.
도예활동이 시각장애 초등학교의 자아개념, 사회성숙도 및 학교생활 적응능력에 미치는 효과
이영신,이해균 한국시각장애교육&재활학회 2008 시각장애연구 Vol.24 No.3
This study is to investigate the effects of the visually handicapped' ceramic art on the self-conception, social maturity and the adaptation ability of school life. The subjects are the three sixth grade students who are lack of study eagerness, self-confidence, attentive-concentration and show excessive action. The summary is as follows. First, ceramic art was found to be effective to positively change the self-conception of the primary visually handicapped. Second, ceramic art was found to be effective to change affirmatively sociality. Third, ceramic art was found to be effective to positively change the primary visually adaptation ability to school life. Particularly, By way of cooperative activity, the interaction with friends was formed and the relation with friend was improved, in the relation with teachers, the confidence was heightened and was found to be effective to self concept and the adaptation ability school. 본 연구는 도예활동이 시각장애 초등학생의 자아개념, 사회성숙도 및 학교생활 적응능력에 미치는 효과를 알아보기 위해 맹학교 초등부 6학년 재학 중, 학습의욕과 자신감, 주의집중이 부족하고 과잉행동을 나타나는 3명의 학생을 대상으로 한 연구 결과를 요약하면 다음과 같다. 첫째, 도예활동은 시각장애 초등학생의 자아개념을 긍정적으로 변화시키는 데 효과적이었다. 둘째, 도예활동은 시각장애 초등학생의 사회성을 긍정적으로 변화시키는 데 효과적이었다. 셋째, 도예활동은 시각장애 초등학생의 학교생활 적응능력을 긍정적으로 변화시키는 데 효과적이었다. 특히, 협동 작업을 통해 친구들과의 상호작용이 이루어져 친구들과의 관계도 개선되었으며 교사와의 관계에서도 신뢰도가 높아지는 등 자아개념과 사회성 그리고 학교생활 적응능력에도 긍정적인 영향을 미쳤다.