http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
(주)산호수출포장 (사)한국포장협회 2009 包裝界 Vol.197 No.-
(주)산호수출포장은 수출용 목재상자, 철재상자 제조업체로 지난 20년간 축적된 노하우와 경험을 바탕으로 꾸준한 성장, 발전을 거듭해 온 수출포장 대표 기업이다. 특히 중량물 수출포장 부문은 약 300여개 이상의 거래사와 연간 약 130억원 이상의 매출을 유지하고 있으며 지속적인 품질 개선과 기술 개발로 ISO 9001/ISO 14001, 그리고 철재 제조 부문 3개의 특허와 2개의 실용 신안을 획득하여 국제 경쟁력과 기술력을 고루 갖추어 수출포장의 전문화에 앞장서고 있다. 본 고에서는 (주)산호수출포장의 수출용 BOX의 소재전환에 따른 구조 및 공정 개선 사례와 수출품 포장의 고정방법 개선 사례에 대하여 살펴봄으로써 중량물 및 수출 포장업계의 발전을 독려해 보고자 한다.
The effect of relative humidity on CO_2 capture capacity of potassium-based sorbents
이수출,김재창,채호진,최보윤,정석용,Chun Yong Ryu,박정제,백점인,Chong Kul Ryu 한국화학공학회 2011 Korean Journal of Chemical Engineering Vol.28 No.2
Potassium-based sorbent was prepared by impregnation with potassium carbonate on activated carbon. The role of water and its effects on pretreatment and CO_2 absorption was investigated in a fixed bed reactor. K_2CO_3could be easily converted into K_2CO_3·1.5H_2O working as an active species by the absorption of water vapor as the following reaction: K_2CO_3+3/2 H_2O→K_2CO_3·1.5H_2O. One mole of K_2CO-3·1.5H_2O absorbed one mole of CO_2 as the following reaction: K_2CO_3·1.5H_2O+CO_2^→←_2KHCO_3+0.5 H_2O. The K_2CO_3·1.5H_2O phase, however, was easily transformed to the K_2CO_3 phase by thermal desorption even at low temperature under low relative humidity. To enhance CO_2 capture capacity and CO_2 absorption rate, it is very important to maintain the K_2CO_3·1.5H_2O phase worked as an active species, as well as to convert the entire K_2CO_3 to the K_2CO_3·1.5H_2O phase during CO_2 absorption at a temperature range between 50 ℃ and 70 ℃. As a result, the relative humidity plays a very important role in preventing the transformation from K_2CO_3·1.5H2O to the original phase (K_2CO_3) as well as in producing the K_2CO_3·1.5H_2O from K_2CO_3, during CO_2 absorption between 50℃ and 70 ℃.
Novel regenerable lithium silicate-based dry sorbent for high temperature carbon dioxide capture
이수출,김재창 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
Lithium silicate-based dry sorbent was developed for CO<sub>2</sub> capture at a high temperature range between 550°C and 700°C. Lithium silicate-based sorbents were prepared by physical mixing Li<sub>2</sub>CO<sub>3</sub> and SiO<sub>2</sub> in a molar ratio of 2:1 with and without γ-Al<sub>2</sub>O<sub>3</sub>, respectively. The CO<sub>2</sub> capture capacity of the LS2 sorbent decreased from 227.1 to 51.2 mg CO<sub>2</sub>/g sorbent. On the other hand, the LS2A(γ)10 sorbent was found to remain as high as 190 mg CO<sub>2</sub>/g sorbent at the 55th cycle of CO<sub>2</sub> sorption/regeneration, although it decreased from 235 to 190 mg CO<sub>2</sub>/g sorbent during multiple tests of 55cycles in a high temperature. In particular, the CO<sub>2</sub> sorption rate of the LS2A(γ)10 sorbent, which was prepared by adding 10 wt% Al<sub>2</sub>O<sub>3</sub>, was much faster than that of the LS2 sorbent. Considering that the cyclic stability and CO<sub>2</sub> sorption rate are important factors in addition to the CO<sub>2</sub> capture capacity, the new regenerable lithium silicate-based sorbent (LS2A(γ)10) containing Li<sub>2</sub>SiO<sub>3</sub> and LiAlO<sub>2</sub> could be used as a sorbent with the potential for CO<sub>2</sub> capture at high temperatures.
이수출,채호진,조민선,류민영,이중범,엄태형,김재창 한국공업화학회 2017 한국공업화학회 연구논문 초록집 Vol.2017 No.1
연소 후 이산화탄소 포집 공정에 적용 가능한 알칼리금속 기반 흡수제는 알칼리금속 탄산염(K<sub>2</sub>CO<sub>3</sub>) 1 mole이 이산화탄소(CO<sub>2</sub>) 1 mole과 물(H<sub>2</sub>O) 1 mole과 반응하여 2 mole의 알칼리금속 중탄산염(KHCO3)을 형성하고, 중탄산염은 열(150-200℃)에 의해 CO<sub>2</sub>와 H<sub>2</sub>O를 배출하고 원래의 활성물질 형태인 탄산염으로 전환된다(K<sub>2</sub>CO<sub>3</sub> + CO<sub>2</sub> +H<sub>2</sub>O ↔ 2KHCO<sub>3</sub>). 알칼리금속 기반 건식 흡수제 제조 시 가장 중요한 점은 부반응을 최대한 억제할 수 있는 조성, 흡수능, 흡수속도, 안정성, 내마모도를 고려하여 흡수제를 설계하는 것이다. 이에 본 연구에서는 이러한 특성을 만족하기 위한 건식 흡수제 설계 방법을 제시하고, 이들 흡수제의 흡수/재생 특성 평가와 분석기기를 이용한 분석 방법을 제시하고자 한다. 흡수제의 반응전·후와 재생 후의 특성 분석은 XRD, TPD, TG, IR, BET, SEM, TEM 등의 분석 기기를 이용하였다. 여러 가지 흡수제의 흡수/재생 특성 및 구조 분석을 통한 부반응 영향과 재생성이 우수한 알칼리금속 기반 흡수제의 설계에 대한 상세한 내용을 다루고자 한다.
국내 미이용 바이오매스 기반 식품공정 저탄소화 기술화 방안
강태진(Tae-Jin Kang),김진호(JinHo Kim),이다혜(Dahye Lee),김지현(JiHyun Kim),이예지(YeJi Lee),이수출(Soo Chool Lee),강석환(Suk-Hwan Kang) 한국환경에너지공학회 2022 한국열환경공학회 학술대회지 Vol.2022 No.2
2021년 7 월 EU에서 발표한 탄소국경 제도(CBAM: Carbon Border Adjustment Mechanism)에 의해 국경 간 거래되는 제품의 직 · 간접적 탄소배출량을 기초로 산정하여 무역 관세롤 부과한다. 이에 따라, 2026년부터 EU 시장에 수출하는 모든 기업은 수출 제품의 탄소 비 용을 부담해야 한다. 대표적인 탄소 多배출 산업에 속하는 식품 가공산업의 경우 수출을 주력으로 하기에 저탄소 공정개발 및 구축을 통한 식품업종의 경쟁력 확보가 필요하다. 따라서 본 연구에서는 식품공정 중 에너지 소비량 및 온실가스 배출량이 가장 높은 공정인 건조공정에 국내 미이용 바이오매스를 이용한 저탄소화 방안과 이에 따른 온실가스 감축량 및 기대효과에 대해 고찰하였다.