http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상회(Sang-Hoi Yi),정재용(Jae-Yong Jeong) 大韓電子工學會 2009 電子工學會論文誌 IE (Industry electronics) Vol.46 No.3
본 논문은 HDMI 콘넥터의 측정 지그를 활용한 측정법 개발에 관한 것이다. 이 방법은 디지털신호의 콘넥터 측정에 사용될 수 있고, 측정사양에 대한 상세 내역들에 응용된다. 두 개의 제조사 콘넥터에 대한 측정 결과를 새로 제안하는 방식으로 도출하였다. 최종적으로 본 논문에서 제안한 방법은 HDMI 콘넥터에 대한 측정방법으로 제안되고, 공장에서 생산하는 콘넥터 제품을 손쉽게 측정 할 수 있는 방법으로 활용 할 수 있다. In this paper, a test method of HDMI connectors is developed using a test zig. This method is used to test the characteristic for a digital signal connector, and is applied the compliance test specification. The test results of connectors for the two manufactory are implemented by the new proposed method. Finally, it is suggested to the new test method of HDMI connector in this paper, and is applied to the simple test method of connector in manufactory.
이상회(Yi Sang-Hoi),박동희(Park Dong-Hee) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.11
In this paper, an analysis of chip-size antennas with integrated circuits in a wireless sensor networks has suggested. Also, we demonstrate accuracy comparing the results of the return loss RL from M. Bartek’s analytical method[1]. Therefore, the method of transmission line suggested in this paper is advanced than M. Bartek’s method. For design of the chip-size antenna, we selected the Coming Pyrex glass and HRS(High Resistivity Silicon) substrates. we designed chip-size antennas that will be able to operate at the central frequency 6㎓. Also, we verified the deviation value about 35㎒. Therefore, the chip-size antennas on HRS substrate have better results when compared to antennas on Pyrex glass substrate.
김민성(Min-Sung Kim),오성진(Seung-Jin Oh),이상회(Yi Sang-Hoi) 대한전자공학회 2016 대한전자공학회 학술대회 Vol.2016 No.11
In this paper, A plat type in-wheel motor for electric vehicle has designed. The electromagnet in winding loop and the permanent magnet are located in the hub of wheel tire and these are faced in fornt of each others. The using of the hub of wheel is increasing the torques of motors, and these are efficiently increasing. And these are connected in direct of the elecetric vehicle.
협력적 문제해결능력 신장을 위한 공학수학 수업모형의 설계원리 개발
정애경(Ae Kyung Chung),이상회(Sang-Hoi Yi),홍유나(Yuna Hong),김능연(Neung-Yeun Kim) 대한전자공학회 2011 電子工學會論文誌 IE (Industry electronics) Vol.48 No.1
본 연구는 전문대학 공학계열 학생들의 수학 기초학습능력과 문제해결능력 신장을 위한 공학수학 수업모형의 설계원리를 도출하고 개발하는 데 목적이 있다. 본 연구를 위해서 첫째, D 대학 디지털전자과의 교수 · 학습환경 분석과 함께 산업체 및 졸업생을 대상으로 한 요구분석을 실시하였고, 둘째, 요구분석 결과와 관련 선행연구를 바탕으로 공학수학 수강생들의 기초수학학습능력과 문제해결능력 신장을 위한 수업모형의 기반 설계이론을 도출하였다. 연구 결과, 수업모형의 기반 설계이론으로는 (1) 수학 기본개념과 반복훈련을 통해서 수학 기초학습능력을 높이고, (2) 동료 학습자간 협력적 문제해결활동을 통해서 문제해결능력을 신장하고, (3) 학습자의 성찰을 촉진하고 학습자의 수업활동에 대한 교수자의 체계적인 점검과 즉각적인 피드백을 제공하고, (4) 최근 온라인과 모바일 환경에 익숙한 학습자들이 자기주도적으로 학습할 수 있는 환경을 제공하는 것이다. The purpose of this study was to develop the basic design principles for the engineering mathematics teaching model that supported college students to become collaborative problem solvers. For this purpose, the following four design principles were drawn from the steps of systems approach, especially with consideration of needs of engineering students, professors, curriculum and relevant research on mathematical education. As a result, the four design principles for the engineeering mathematics teaching model were drawn as follows: (1) Improve students' basic mathematical learning abilities through repetition and elaborative practice of the basic mathematical concepts and principles, (2) Develop students' problem solving abilities through collaborative projects or learning activities with peers, (3) Facilitate students' reflection and provide teacher's monitoring and prompt feedback during their learning process, and (4) Build up online learning environments that enable students to become self-regulated learners.