http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상명 ( Sang Myung Lee ),김현숙 ( Hyeon Sook Kim ),박관수 ( Gwan Su Park ),이상진 ( Sang Jin Lee ),이정호 ( Jeong Ho Lee ),황용 ( Yong Hwang ),이찬희 ( Chan Hee Lee ),이채희 ( Chae Hee Lee ),김정현 ( Jeong Hyeon Kim ) 한국임학회 2014 산림과학 공동학술대회 논문집 Vol.2014 No.-
본 연구는 관상용으로 중요하게 대두되고 있는 분꽃나무의 새로운 용도개발 및 유용자원의 효율적인 관리와 우량개체 선발을 위한 기초 자료를 제공하고자 자생 집단의 분포와 식생환경 및 토양을 분석하였다. 분꽃나무( Viburnum carlesii Hemsl.)는 인동과(Caprifoleaceae)에 속하는 낙엽관목으로서 내한성과 내염성이 강해 산기슭 양지 및 해안가에서도 잘 자란다. 관상용으로 심으며 도시내의 공원수로도 매우 좋다. 열매는 식용한다. 분꽃나무 자생지 16개 조사구의 평균 해발 47∼510m의 범위에 분포하였으며, 경사는 15∼35°이고 평균 출현종수는 40분류군이다. 분꽃나무 자생지의 토양을 분석한 결과, 전체 평균 pH는 5.84이고 유효인산은 평균 7.71이며 유기물합량은 평균 5.92% 이었다. The distribution, vegetation characteristics of natural populations, and soil were investigated to provide biological basic data for the selection of superior trees, effective management of useful resource plants, and new used development of Viburnum carlesii Hemsl. which becomes influential as an ornamental plant. V. carlesii is deciduous shrub and belongs to Caprifoleaceae. Since V. carlesii has strong cold hardiness and salt tolerance, it grows well in the sunny spot at the foot of a mountain and seashore. V. carlesii is mostly planted for ornamental reason at the parks in the city and fruits are edible. Sixteen quadrates of V. carlesii ranged 47~510m above sea level, with inclination of 15~35.and the average number of identified species was 40 taxa. As a result of the analysis of soil in the natural populations of V. carlesii, the total average pH, P2O5, and O.M. were 5.84, 7.71, and 5.92 percentages.
희귀,특산식물 미선나무의 분포와 자생지 식생특성 및 토양 분석
이상명 ( Sang Myung Lee ),김현숙 ( Hyeon Sook Kim ),박관수 ( Gwan Su Park ),이상진 ( Sang Jin Lee ),이정호 ( Jeong Ho Lee ),황용 ( Yong Hwang ),이찬희 ( Chan Hee Lee ),이채희 ( Chae Hee Lee ),김정현 ( Jeong Hyeon Kim ) 한국임학회 2014 산림과학 공동학술대회 논문집 Vol.2014 No.-
한반도 특산식물인 미선나무의 새로운 용도개발 및 유용자원의 효율적인 관리와 우량개체 선발을 위한 기초 자료를 제공하고자 자생 집단의 분포와 식생환경 및 토양을 분석하였다. 문헌자료 및 표본정보 수집과 현지조사를 통해 분포도를 작성한 결과 미선나무는 천연기념물지정 충북 괴산(추점리, 송덕리, 율지리), 영동(매천리), 전북 변산반도와 자생지 진천, 충주, 옥천, 안동, 의성 등 충청북도와 경상북도를 중심으로 주로 한반도 중부지방에 집중 분포하는 것으로 확인되었다. 또한, 자생 집단은 주로 해발 75∼121m의 범위에 분포하였으며, 경사는 20∼35°산지나 석회암 지역에 많이 분포하였다. 9개 자생 집단에 대한 식생조사 결과 9개 조사구에서 총 154분류군이 출현하였으며, 평균 출현종수는 35분류군으로 나타났다. The distribution, vegetation characteristics of natural populations, and soil were investigated to provide biological basic data for the selection of superior trees, effective management of useful resource plants, and new used development of Abeliophyllum distichum Nakai which is the Korea endemic species. As a result of making a distribution chart through collecting literature materials and specimens information and field researches, it was verified that A. distichum is intensively distributed in the central part of the Korean peninsula. A. distichum was distributed in Goesan in Chungcheongbuk-do(Chujeom-ri, Songdeok-ri, and Yulji-ri), Yeongdong(Maecheon-ri), and Byeonsan Peninsula in Jeollabuk-do as a natural monument. In addition, A. distichum was distributed in natural habitat in Gyeongsangbuk-do and Chungcheonbuk-do, such as Jincheon-gun, Chungju-si, Okcheon-gun, Andong-si, and Uiseong-gun. The natural populations of A. distichum, ranged 75~121m above sea level, with inclination of 20∼35.on the mountainous area or limestone zone. As a result of a vegetation survey of 9 natural populations, total 154 taxa were identified from the 9 quadrates. The average identified species were 35 taxa.
이상명(Sang-Myung Lee),서영(Young Seo),송창우(Chang-Woo Song),이승엽(Seung-Yop Lee) 대한기계학회 2016 大韓機械學會論文集B Vol.40 No.5
유도가열은 유도전류를 이용하여 도체에 열을 가하는 방식이다. 유도가열은 열을 가하고자 하는 물체 내부에서 열이 발생하고, 비접촉이며 안전하기 때문에 산업이나 의료분야에서 광범위하게 사용되고 있다. 최근에 형상기억합금을 사용하여 열에 의해 인공치아가 임플란트에서 쉽게 빠질 수 있게 하는 임플란트 시스템이 개발되었다. 본 논문에서는 새로운 임플란트 시스템에서 인공치아를 쉽게 제거할 수 있는 유도가열 장치를 개발하였다. 먼저 전자장-열 구조 유한요소 연성 해석을 통해 다양한 입력 전류와 코일 형상에 대해 온도를 시뮬레이션 상으로 확인해보았다. 해석 결과를 토대로 유도가열장치 시작품을 제작하여 실험을 통해 86초에 인공 치아가 분리됨을 확인하였다. Induction heating is the process in which an electrically conducting object (usually a metal) is heated by electromagnetic induction through heat generated in the object by eddy currents. The main advantage of an induction heating device is the generation of the heat inside the target object itself. Hence, non-contact and safe heating devices are widely used in many industrial and medical fields. Recently, a new dental implant system was developed using a shape-memory alloy, wherein an artificial tooth could be easily removed from the dental implant by heating. This paper discusses the development of an induction-heating device to remove the dental crown in the new implant system. First, the finite element simulation of electromagnetic and thermal coupling analysis was implemented to obtain the temperature distributions of the target object for various frequencies, input currents, and coil shapes. Based on the simulation results, experiments were conducted by using prototypes, and an induction heating device was developed to remove the dental crown from the implant.
액티브 캐뉼라 로봇의 엔드 이펙터용 손가락모형 메커니즘
김상명(Sangmyung Kim),이수준(Soojun Lee),최동은(Dongeun Choi),이우섭(Woosub Lee),강성철(Sungchul Kang),김계리(Keri Kim) (사)한국CDE학회 2014 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2014 No.2
As minimally invasive surgery has been a trend in the medical world, many medical instruments tend to be thinner and smaller and active cannula robot also has been studied for a decade to implement thin and flexible surgical robot. However, in some cases, we need much higher curvature than the one made by using only pre-curved tubes in active cannula robot. We designed and made a prototype of the end-effector which has high-curvature in order to use active cannula robot in narrow space of human body. The developed end-effector, which has finger-like shape, consists of three joints that are constrained in the form of four-bar linkage and the first link is constrained in the inner tube of the active cannula robot. The end-effector is possible to bend from 0 degrees to 180 degrees and it has 3 degrees of freedom including the translational and rotational motions. In this paper, we verified that the finger-like mechanism has ability to guide camera which is installed at the end section of the end-effector in minimally invasive surgery.
이상명(Sang-Myung Lee),송석환(Seok-Whan Song),이승구(Seung-Koo Rhee),박재철(Jae-Chul Park),나기태(Ki-Tae Na) 대한정형외과학회 2010 대한정형외과학회지 Vol.45 No.4
목적: 진행된 Kienbock 질환의 치료 시 삼주상 유합술(STT fusion), 주상-유두골 유합술(SC fusion), 그리고 주상-유두-유구-삼각골 유합술 (SCHT fusion)의 임상적 치료 결과를 평가하고자 한다. 대상 및 방법: Lichtman 분류 제 Ⅲ기 또는 Ⅳ기인 40명의 환자를 대상으로 제한적 수근관절 유합술을 실시하였다. 술 전 방사선 결과와 수술 시 관절 면에 대한 평가를 통해 삼주상 및 주상-유두골 유합술은 제 Ⅲa와 Ⅲb기에서 시행하였으며 주상-유두-유구-삼각골 유합술은 Ⅲb기와 Ⅳ기에서 시행하였다. 평균 추시 기간은 31.6개월(범위 13-108)이었으며 수술 시 평균 나이는 44.7세(범위 22-71)였다. 삼주상 유합술은 13예, 주상-유두골 유합술은 19예, 그리고 주상-유두-유구-삼각골 유합술은 8예에서 시행하였다. 치료 결과를 평가하기 위하여 수근관절의 운동 범위, 파악력(grip strength) 통증(VAS, visual analog pain score)을 측정하였으며 최종추시 방사선학적 변화도 측정하였다. 결과: VAS 점수는 삼주상 유합술에서 4.7점, 주상-유두골 유합술에서 3.0점. 주상-유두-유구-삼각골 유합술에서 4.5점이었다. 파악력은 반대편과 비교하여 삼주상 유합술에서 72%, 주상-유두골 유합술에서 78%, 주상-유두-유구-삼각골 유합술에서 54%이었다. 통증의 감소는 주상-유두골 유합술 군이 디른 두 군에 비해 우수하였으며(p=0.007), 주상-유두-유구-삼각골 유합술 군에서 파악력 감소가 관찰되었다(p=0.009). 세 군 간에 운동 범위는 유의한 차이가 없었다. 주상-유두골 유합술을 시행한 1예를 제외하고 모든 예에서 골유합을 얻을 수 있었다. 결론: 진행된 Kienbock 질환의 치료로써 제한적 수근관절 유합술은 유용한 방법이며 통증의 경감에 있어서 주상-유두골 유합술이 삼주상 유합술에 비하여 우월한 결과를 보였다. 주상-유두-유구-삼각골 유합술은 제 Ⅳ기 Kienbock 질환에 있어서 고려해볼 만한 구제 수술이라 생각 된다. Purpose: To evaluate clinical outcomes of triscaphe (STT), scapho-capitate (SC) and scapho-capito-hamato-triquetral (SCHT) fusion in advanced Kienbock's disease. Materials and Methods: Forty patients with Lichtman stage Ⅲ and Ⅳ disease were treated with limited wrist fusion. sn & SC fusion for stage Ⅲb and Ⅲb, and SCHT fusion for Ⅲb and Ⅳ were done according to preoperative radiologic and intraoperative articular surface findings. The mean follow-up period was 31.6 months (range 13-108) and the mean age at the time of their surgery was 44.7 years (range 22-71) There were 13 cases of sn fusion, 19 cases of SC fusion and 8 cases of SCHT fusion. For assessment of treatment results, wrist range of motion, grip strength, VAS (visual analog pain score) and any radiologic changes of the wrist were checked at last follow-up. Results: VAS score was 4.7 for STT, 3.0 for SC, 4.5 for SCHT. Grip strength, compared with the contralateral side, was 72% for STT, 78% for SC, and 54% for SCHT. Pain was more improved for the SC fusion group than for the other two groups (p=0.007). Grip strength was decreased more in the SCHT fusion group than in the other two groups (p=0.009). There were no statistically significant differences in range of motion between any of the three groups. The bone achieved union in all cases except one SC fusion. Conclusion: Limited wrist fusion in advanced Kienbock's disease has been regarded as a valuable method. However, SC fusion has been thought of as a more favorable technique than sn fusion with respect to pain relief. SCHT fusion is thought to be a possible salvage procedure with a limited indication for Stage Ⅳ Kienbock's disease.
李相明(Sang-Myung Lee) 한국차학회 1998 한국차학회지 Vol.4 No.1
The analysis of the effect on the human body of the Tea and its container, measured by magnetic resonance analysis. Unfermented Tea retains its original characteristic. The black Tea has intermediate property. Oolong and other fermented Tea show changed property. As for the teapot and containers, Gold, Platinum, Bioceramics and Copper show large positive value. Stainless steel shows low positive and negative value. Iron and Aluminum show only negative value.