http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이병권,조광희,정회경,Lee, Byungkwon,Cho, Kwanghee,Jung, Hoekyung 한국정보통신학회 2018 한국정보통신학회논문지 Vol.22 No.6
OLED(Organic Light-Emitting Diode) 제조에서 에이징(aging) 공정은 제조 효율을 높이고 에이징 보정을 위한 보정 값을 측정한다. OLED의 에이징 보정을 위한 보정 값은 구동 신호에 적용할 수 있다. OLED 에이징 공정은 미리 설정된 구동신호와 온도에 의해 정해진 시간 동안 빛을 출력한 후 전류를 측정한다. OLED 제조 공정에서 증착 및 기온에 의해 균일하지 않은 것에 대해 에이징을 가하는 것이다. 이 시간이 OLED 효율 감소에 미치는 영향은 거의 없다. 에이징을 위해 필요한 조건을 만들기 위해 가열장치와 신호 생성 시스템이 요구된다. 가열장치와 신호 생성 시스템에 의해 측정된 결과값은 OLED 제조에서 전력 요구사항, 균일성, 효율성을 평가하는 근거로 사용할 수 있다. 이에 본 논문에서는 실용적인 OLED 에이징 보정을 위한 구동 신호 생성 및 가열 시스템의 연동을 위한 구성을 제안하고 이를 구현하였다. In OLED (Organic Light-Emitting Diode) manufacturing, the aging process increases the manufacturing efficiency and measures the correction value to correct the aging. The correction value for correcting the aging of the OLED can be applied to the driving signal. The OLED aging process measures the current after outputting the light for a predetermined time according to the preset driving signal and temperature. In the OLED manufacturing process, aging is applied for non-uniformity by deposition and temperature. This time has little effect on OLED efficiency reduction. Heating devices and signal generation systems are required to create the conditions necessary for aging. The results measured by the heating system and signal generation system can be used as a basis for evaluating power requirements, uniformity and efficiency in OLED manufacturing. In this paper, we propose and implement a configuration for interlocking the driving signal generation and heating system for practical OLED aging correction.
이병권 ( Byungkwon Lee ),김석일 ( Sukil Kim ),전중남 ( Joongnam Jeon ) 한국정보처리학회 2004 한국정보처리학회 학술대회논문집 Vol.11 No.1
x86기반 임베디드 리눅스 시스템의 저장장치로 단일-칩 플래시 디스크인 DOC(DiskOnChip) 시스템이 많이 사용되고 있다. 본 연구에서는 DOC 스스로 부팅하도록 부팅이미지, 커널이미지, 루트파일시스템을 설치하는 과정을 설명한다. DOC는 자체 기능으로 에러탐색 및 수정기능과 파일시스템으로 TrueFFS가 인터페이스로 동작한다. 또한, 구성된 DOC 저장 시스템에 GUI 구현할 수 있도록 Qt-E 계층을 추가하여 시스템 개발자는 단지 어플리케이션을 설치함으로써 쉽게 임베디드시스템을 구성할 수 있다.
이병권 ( Byungkwon Lee ),정세영 ( Seyoung Jeong ),유갑상 ( Gabsang Yoo ),전중남 ( Joongnam Jeon ) 한국정보처리학회 2008 한국정보처리학회 학술대회논문집 Vol.15 No.2
인터넷을 통한 온라인 교육의 활성화로 블랜드형 교육이 이슈로 대두되고 있다. 또한 이러닝 교육을 위한 저작도구 및 하드웨어 장비들이 속속들이 개발되고 활용된다. 이러한 이러닝 교육에 도구 중 전자칠판은 중요 요소이지만 전자칠판과 전자교탁이 분리되어 운용되는 것이 대부분이다. 이로 인한 관리 및 비용 측면에서 단점을 가지고 있다. 본 연구에서는 기존의 전자칠판 및 전자교탁이 따로 분리되어 운용되던 방식을 통합하여 단일형태의 임베디드 교육시스템의 구현을 소개한다. 임베디드 교육시스템은 온라인 교육은 물론 오프라인 교육도 동시에 가능하고, 교수자의 편의를 위하여 USB 기반의 자동 프레젠테이션을 지원하며 학습관리 및 컨턴츠 관리를 위한 소프트웨어를 포함하고 있다.
AMOLED 에이징 챔버 신호 생성기 중앙서버 관리 시스템
김한길,이병권,정회경,Kim, Hankil,Lee, Byungkwon,Jung, Heokyung 한국정보통신학회 2017 한국정보통신학회논문지 Vol.21 No.6
최근 디스플레이 기술 발전과 함께 AMOLED(Active Matrix OLED) 패널(Panel)의 생산과 수요가 급증하고 있다. AMOLED 패널은 기본적으로 LCD와는 다르게 백라이트(Backlight)를 필요로 하지 않아 적은 소비전력으로 선명도 있는 영상의 출력이 가능하다. 따라서 세계적으로 AMOLED 시장이 커지고 있다. 이에 따라 생산에 필요한 검사 장치의 수요도 확산되고 있다. AMOLED 패널 에이징(Aging) 시스템의 검사 장치는 MES(Manufacturing Execution System), MIS(Management Information System)와 연동하여 운영되며, 네트워크 환경을 구축하는 것이 효율적이다. 패널 에이징에 사용되는 검사 장치는 다중 신호를 출력하는 기능을 가진 신호 생성기(Pattern Generator)이다. 다수개의 신호 생성기를 운영하기 위해서는 효율적인 설계가 필요하다. 이를 해결하기 위해 본 논문에서는 신호 생성기를 원격으로 통합 제어하기 위한 방법과 AMOLED 패널을 구동시키기 위한 방법을 제안하고 이를 구현하였으며, 이에 따른 타이밍과 전원 설정 결과를 제시하였다. Recently, with the development of display technology, AMOLED(Active Matrix OLED) panel production and demand are increasing. Unlike LCD, AMOLED panel basically does not need backlight, so it can output clear images with low power consumption. Therefore, the AMOLED market is growing globally. Accordingly, the demand for inspection devices required for production is also expanding. The inspection device of the AMOLED panel aging system operates in conjunction with MES(Manufacturing Execution System) and MIS(Management Information System), and it is efficient to construct network environment. The inspection device used for panel aging is a pattern generator capable of outputting multiple signals. Efficient design is required to operate multiple signal generators. To solve this problem, the proposed system proposed a method for remotely controlling the signal generator remotely and a method for driving the AMOLED panel. And the timing and power setting results are presented.
변형격자계를 이용한 3차원 날개 주변의 비정상 유동 해석
유일용(Ilyong Yoo),이병권(Byungkwon Lee),이승수(Seungsoo Lee) 한국전산유체공학회 2010 한국전산유체공학회지 Vol.15 No.1
Deforming mesh should be used when bodies are deforming or moving relative to each other due to the presence of aerodynamic forces and moments. Also, the flow solver for such a flow problem should satisfy the geometric conservation law to ensure the accuracy of the solutions. In this paper, a RANS(Reynolds Averaged Navier-Stokes) solver including automatic mesh capability using TFI(Transfinite Interpolation) method and GCL is developed and applied to flows induced by oscillating wings with given frequencies. The computations are performed both on deforming meshes and on rigid meshes. The computational results are compared with experimental data, which shows a good agreement.