http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이범,Lee, Buhm 한국정보통신학회 2003 한국정보통신학회논문지 Vol.7 No.3
본 연구에서는 몬테카를로 시뮬레이션을 사용하여 상정사고를 고려한 전력탁송에 따른 영향평가를 할 수 있도록 하였으며, 이로써 전력탁송에 따른 탁송회사의 발전비용, 송전손실, 계통안전도에 미치는 영향을 분석할 수 있도록 하였다. 제안한 방법을 시험계통에 적용하여 본 연구의 타당성을 검증하였다. This paper presents an algorithm for evaluating power wheeling effects considering contingency using Monte-Carlo simulation. The effects of power wheeling on generating cost, transmission losses, and system security are considered. And, for a specific operating condition, the effects are quantified by the sensitivity of specific quantities of interest with respect to wheeling level. This model is utilized to calculate probability distribution functions of the incremental effects of power wheeling with a Monte-Carlo simulation. The proposed method is applied to IEEE RTS-96 system and the results are presented.
계통운전예비력특성을 감안한 직접부하제어와 기동정지계획의 연계방법에 관한 연구
이범,Lee, Buhm 한국정보통신학회 2003 한국정보통신학회논문지 Vol.7 No.4
본 연구에서는 계통운전예비력특성을 감안하여 DLC와 기동정지계획을 연계시킬 수 있는 방법을 제시하였다. 계통운전예비력을 고려하기 위하여 새로운 제약조건을 정식화하였으며, 또한 DLC와 UC를 연계하기 위하여 3차원 동적계획법을 적용하였다. 이 결과, 경제적인 DLC와 기동정지계획을 동시에 구할 수 있게 되었으며, 이를 시험계통에 적용하여 그 효용성을 입증하였다. This paper presents a new linking methodology of direct load control(DLC) and unit commitment(UC) considering system spinning reserve characteristics. To consider system spinning reserve characteristics, we formulate new constraints. And to link DLC and UC, we employed 3-Dimensional dynamic programming which has DLC state, UC state, and stage. As a result, economical DLC and UC schedule of the power system is possible. This method is applied to the test system, and the usefulness of the method is verified.
PLOC를 고려한 배전계통의 신뢰도 계산 및 ANP에 의한 종합적 평가
이범,김용하,Lee, Buhm,Kim, Yong-Ha 한국조명전기설비학회 2000 조명·전기설비학회논문지 Vol.14 No.3
본 연구는 확장하연서도 적용하기 어려운 계통인 인천국제공항 배전계통에 대하여 전력공급제한을 포함하는 종합적언 선협도평가를 하였다. 우선, 계통의 선로제약 및 전압강하를 고려한 평가를 하기 위하여 확정론적인 방법과 고장모드-효과분석법에 지반을 푼 PLOC지법을 도입하고, 신뢰도지수를 계산하었다. 또한 계통의 능력을 평가하고, 신뢰도를 개선하기 위하여 ANP를 도입하였다. 이와같은은 결과로 정확한 신뢰도를 계산하교 취약부분을 찾아내고, 계통의 확장계획을 수립하는 것올 가능하게 하였다. This paper describes the unified reliability evaluation with partial loss of continuity for Inchon international airport distribution system which is complex and difficult system to implement. To evaluate reliability considering line limitation and voltage drop of the system, PLOC technique which is based on deterministic evaluation technique and failure mode & effective analysis method is employed. And reliability indices calculation method is used. Finally, to evaluate the system performance and to improve the reliability of the system, Analytic network process method is employed. As a result, calculating accurate reliability, finding weak points, and expansion scheduling of the system is possible.
이범,김용하,최상규,Lee, Buhm,Kim, Yong-ha,Choi, Sang-kyu 한국에너지학회 2004 에너지공학 Vol.13 No.2
본 연구에서는 급전계획의 파레토최적해를 구하는 새로운 방법을 제시하였다. 이를 위하여, 고찰기간에 대해 총 오염물질배출량을 고려하여 최적경제부하배분을 할 수 있는 동적계획법을 도입하였으며, 최적급전계획의 결과를 군으로 얻을 수 있는 파레토최적해를 얻는 방법을 개발하였다. 이 결과, 의사결정자는 파레토최적해를 얻을 수 있으며, 이중에서 하나의 해를 선택하여 사용할 수 있게 되었다. 제안한 방법을 시험계통에 적용하여 유용성을 검증하였다. This paper presents a new methodology to get pareto-optimal solution for generation planning. First, we apply dynamic programming, and we can get an optimal economic dispatch considering total quantity of contamination for the specified term. Second, we developed a method which can get pareto-optimal solution. This solution is consisted of a set of optimal generation planning. As a result, decision maker can get pareto-optimal solutions, and can choose a solution. We applied this method to the test system, and showed the usefulness.
이범(BUHM LEE) 한국지능시스템학회 2019 한국지능시스템학회논문지 Vol.29 No.3
본 연구에서는 수용가시스템 등에서 종합적인 전력품질을 평가하는 새로운 시스템을 제시한다. 우선, 기존 AHP모델에서 대체안들을 분리하여 처리할 수 있는 IDEAL AHP를 개발하였다. 기존의 AHP모델이 모든 대안을 포함하여 경쟁력을 평가하는데 반하여, IDEAL AHP는 대안 개별로 평가할 수 있는 장점을 갖고 있다. 두 번째로 IDEAL AHP에 신뢰도, 전압 SAG/SWELL, 고조파, 운전비용 등 전력품질과 관련한 항목을 종합적으로 평가할 수 있는 전력품질평가모델을 제시하였다. 개발된 모델을 수용가 모델 시스템에 적용하여 처리과정과 효율성을 보였다. This paper presents a new methodology to evaluate overall electric power quality and to optimize system especially customer power system. first, author developed ideal analytic hierarchy process model(ideal ahp) which can decouple alternatives from traditional ahp. instead traditional ahp only evaluate competitiveness among all alternatives, but ideal ahp can evaluate competitiveness for each alternative. second, author build electric power quality evaluation model for customer system. this method evaluate reliability, voltage sag/swell, harmonics, and operating cost. finally, author applied the method for a customer based model system, and show the process and effectiveness of the method.
이범(Buhm Lee),김경민(Kyoung-Min Kim),최남섭(Nam-Sup Choi) 한국전자통신학회 2021 한국전자통신학회 논문지 Vol.16 No.2
본 연구에서는 SCDF를 사용하여 전력공급의 가치를 산정하고, 부하점별 중요도를 다면적인 평가를 하는 방법을 제시한다. 이의 방법으로 지속정전, 순간정전, 전압 Sag/Swell에 대응할 수 있는 SCDF를 제공하고, 이 SCDF를 사용하여 정전과 관련하여 어느 부하점에 어느 정도의 비용이 발생하는지를 계산하였으며, 이들 비용을 다면평가를 통해 어느 부분이 어느정도 취약한지를 평가하고 어느 부분의 확장이 필요한 지를 수치적으로 설명할 수 있도록 하였다. 본 연구를 우리나라의 실배전계통에 적용하여 평가하고 유용성을 검증하였다. This study presents a Power Quality(:PQ) costs calculation methodology based on Value-Based Methodology. A SCDF including Voltage Sag Costs is presented to calculate Sustained Interruption Costs, Momentary Interruption Costs, and Voltage Sags Costs. Authors compared between interruption costs without Back-Up Power Supply and interruption costs with Back-Up Power Supply, and showed reduction of interruption costs by investing Back-UP Power Supply by multi-lateral analyzation. By applying this method to the real system, evaluated and analyzed power quality of the system.