http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전자제어식 차동제한장치의 솔레노이드 어셈블리 형상정밀도 향상을 위한 가공변수 최적화
오상균(Sang-Kyun Oh),서창희(Chang-Hee Suh),이락규(Rac-Gyu Lee),정윤철(Yun-Chul Jung),김영석(Young-Suk Kim) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.11
Mechanical Limited Slip Differential(LSD) is replacing by the electro-magnetic LSD which has good characteristics such as fast response and active control of the vehicle. Coil housing made of STS 304 is one of the most important part in the solenoid assembly of the electro-magnetic LSD. High geometrical accuracy is a prerequisite to the manufacture of coil housing, but precision machining is difficult because the thickness of STS 304 is very thin. The aim of this study is to optimize of cutting parameters in the coil housing. Contact pressure of jaw, cutting speed, feed rate are considered as major parameters to control the geometrical accuracy. Optimized cutting condition was selected using Taguchi method and orthogonal array to evaluate the effectiveness of each parameters. The feed rate was the most effective parameter on the influence of the geometrical accuracy.
다구찌기법을 이용한 공압피팅용 원형 판스프링의 설계변수 최적화
권태하(Tae Ha Kwon),서창희(Chang Hee Suh),이락규(Rac Gyu Lee),오상균(Sang Kyun Oh),정윤철(Yun-Chul Jung),임환빈(Hwan Bin Lim) 대한기계학회 2013 大韓機械學會論文集A Vol.37 No.12
공압피팅은 공압이 사용되는 시스템 및 기계에서 작동유체를 공급하기 위한 유연호스의 접속 및 탈착을 원활히 할 수 있게 하는 공압 시스템의 핵심 요소이다. 공압피팅의 구성요소인 원형 판스프링의 응력분포를 유한요소해석을 통하여 살펴본 결과 원형 판스프링은 공압피팅에 유연호스가 장착 될 때 국부적인 소성변형이 일어나는 것으로 나타났다. 원형 판스프링의 응력집중을 분산시키기 위해 다구찌 실험계획법을 이용하여 최적설계를 수행하였다. 원형 판스프링의 반경, 외측폭, 굽힘각을 주요 설계변수로 설정하였으며 다구찌 실험계획법을 통해 원형 판스프링에 작용하는 최대응력에 폭이 81.3%, 굽힘각이 10.9%, 반경이 1.5%의 기여율을 가짐을 확인하였으며, 최적설계시 초기 형상의 원형판스프링에 비해 약 4% 정도 응력분산의 효과가 있음을 알 수 있었다. The stress concentration of lock-claws, which are one of the important parts for pneumatic fitting for a flexible tube connection, was investigated by finite element simulation. In this study, the generation of the local plastic deformation was predicted when the tube was hooked up to a pneumatic fitting in order to disperse the stress concentration, and design optimization was carried out using the Taguchi method. For the optimization, the outer width, bending angle, and inner radius of the lock-claws are used as main variables. As a result, their respective contribution ratios are revealed as 81.3%, 10.9%, and 1.5%. The ratio of the total stress distribution was improved by 4% compared with the initial design of the lock-claws.