하악 전돌증 환자에서 전산화 단층 촬영을 이용한 하악관의 해부학적 위치에 관한 연구

이동현,김재원,이수연,김재현,안상헌,이상한,장현중,Lee, Dong-Hyun,Kim, Jae-Won,Lee, Su-Youn,Kim, Jae-Hyun,An, Sang-Heon,Lee, Sang-Han,Jang, Hyun-Jung 대한악안면성형재건외과학회 2009 Maxillofacial Plastic Reconstructive Surgery Vol.31 No.6

Purpose: In this study, we analyzed and compared the anatomical position of the mandibular canal in normal occlusion and mandibular prognathism patients. Patients and Methods: Computed tomography image from 58 patients were divided into normal occlusion group and mandibular prognathism group, and each measurement were taken in the each measuring points(2nd premolar, 1st molar, 2nd molar, 3rd molar, ramus). Measurements were statistically analyzed by student's t-test. Results: BC (Thickness of the buccal cortex) value was 2.3~2.7 mm, CB (Distance from the canal to the lingual aspect of the buccal cortex) value was 1.3~4.3 mm, MC (Diameter of the canal) value was 3.2~3.8 mm, LI (Distance from the canal to the lingual aspect of the lingual cortex) value was 2.0~3.7 mm, TM (Thickness of the total mandible) value was 9.5~12.9 mm and CM (Distance from the canal to the inferior border of the mandible) value was 6.9~17.5 mm. Conclusion: In the comparison between two groups, there was statistically significant difference in CB value of 2nd, 3rd molar between normal occlusion and mandibular prognathism, and other value in the rest of the measuring points didn't show statistically significant difference.

대학 공시정보를 활용한 교육국제화역량 인증 여부 예측: 이산선택모형에 의한 대학알리미 공시정보 분석

이동현(Lee, Dong-hyun),조순정(Cho, Soon-jeong) 한국경영교육학회 2020 경영교육연구 Vol.35 No.3

[연구목적] 본 연구는 대학 공시정보를 활용하여 교육국제화역량 인증(IEQAS) 여부를 예측하며, 대학의 인증 유지를 위한 자가 점검에 적합한지 연구 모형을 검증하는데 목적이 있다. [연구방법] 동 연구는 IEQAS 인증․미인증 예측을 위해 2019년 대학알리미 웹사이트에 공개된 138개 사립 대학의 공시정보를 수집했다. 이어, 인증 대학 77개교 및 미인증 대학 61개교 두 집단 간 지표 차이를 검정 후, 5개의 대학경쟁력지표 및 9개의 재정회계지표를 독립 변수로, 2019년 3월에 발표된 IEQAS 인증 결과를 이산형 종속 변수로 설정하여 이산선택모형에 따라 로짓분석과 판별분석을 하였다. [연구결과] 본 연구자들은 t-검정으로 선별한 재학생충원율/신입생충원율/전임교원확보율(이상 대학경쟁력), 학생1인당교육비/교육비환원율/부채비율/법인전임급비율(이상 재정회계)을 연구 모형에 유의한 요인으로 투입했다. 그 결과, 대학경쟁력 지표를 통한 예측력은 로짓분석 71.7%, 판별분석 71.0%로, 재정회계 지표의 경우 로짓분석 70.3%, 판별분석 66.7%의 예측력을 보였다. 동 이산선택모형 내에 공통으로 관여한 유의미한 변수는 재학생충원율, 신입생충원율과 학생1인당교육비로 나타났다. [연구의 시사점] 동 연구는 조직의 부실 여부 예측에 유용한 로짓분석과 판별분석을, 정부의 대학별 공개 자료를 활용하여 IEQAS 인증․미인증 예측에 적용해 본 가치를 지닌다. 본 연구의 이산선택모형은 타당성과 신뢰성이 확인됨으로써, 대학이 손수 IEQAS 인증 유지 점검 시 활용할 수 있으며 대학 평가에 관한 경영교육 실무에 기여할 것이다. [Purpose] Based on a discrete choice model(DCM), this study aims to predict the ‘pass/fail’ of the International Education Quality Assurance (IEQAS) by analyzing publicly opened dataset. Thus, it will enable Korean universities to self-test their IEQAS-related capabilities in a productive manner. [Methodology] This work utilized disclosed data on academyinfo.go.kr in 2019, including a total of 138 private universities from My university competitiveness(MUC), Financial accounting index(FAI); relying on related literature, it proposed two hypotheses and 14 independent variables, followed by conducting logit analysis(LA) and discriminant analysis(DA). [Findings] First, t-tests identified three MUC variables(Levy with enrolled students; Levy with new students; Faculty in full service) and four FAI variables(Educational expenditure; Educational restitution rate; Liability ratio; Corporate transferred money) between 77 IEQAS ‘pass’ group and 61 IEQAS ‘fail’ group in 2019. This DCM presented the following predictive powers: 71.7%-LA vs 71.0%-DA in MUC and 70.3% -LA vs 66.7%-DA in FAI, while Levy with enrolled students, Levy with new students and Educational expenditure worked as keys to predicting the ‘pass/fail’. [Implications] The DCM combining LA/DA can be used for both scholars on the business education area and the IEQAS-related practitioners.

소결 온도에 따른 0.98(Na_0.5K_0.5)NbO₃-0.02Li(Sb_0.17Ta_0.83)O₃+0.01wt%ZnO 세라믹스의 압전 특성

이동현,이승환,이성갑,이규탁,이영희,Lee, Dong-Hyun,Lee, Seung-Hwan,Lee, Sung-Gap,Lee, Ku-Tak,Lee, Young-Hie 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.7

We studied sintering temperature to enhance the piezoelectric properties of $0.98(Na_{0.5}K_{0.5})NbO_3-0.02Li(Sb_{0.17}Ta_{0.83})O_3$+0.01wt%ZnO (hereafter NKN-LST+ZnO) lead free piezoelectric ceramics. The synthesis and sintering method were the conventional solid state reaction method and sintering was executed at $1,080\sim1,120^{\circ}C$. We found that NKN-LST+ZnO ceramics at optimal sintering temperature showed the improved piezoelectric properties at the optimal sintering temperature. The NKN-LST+ZnO ceramics show good performance with piezoelectric constant $d_{33}$= 153 pC/N sintered at $1,090^{\circ}C$. The results reveal that NKN-LST+ZnO ceramics are promising candidate materials for lead-free piezoelectric application.

광대역 파장가변 이중 링 공진기 Add/Drop 필터

이동현,이태형,박준오,김수현,정영철,Lee, Dong-Hyun,Lee, Tae-Hyung,Park, Joon-Oh,Kim, Su-Hyun,Chung, Young-Chul 한국광학회 2007 한국광학회지 Vol.18 No.3

A widely tunable add/drop filter composed of double ring resonators is implemented with high-index-contrast polymer waveguide. To enhance the productivity, directional couplers are designed to have good fabrication tolerance. The refractive indices of the core and cladding in the 1550 nm wavelength are 1.51 and 1.378, respectively. Drop response in comparison with neighborhood peak gets enhanced by more than 2.9 dB at the wavelength where both rings resonate. This filter can be used to build widely tunable laser diode through hybrid-integration with reflective SOA.

표면 전류 분포를 이용한 T자형 UWB 평면형 모노폴 안테나 해석

이동현,박위상,Lee Dong-Hyun,Park Wee-Sang 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.9

We propose a T-shaped UWB printed monopole antenna and investigate the effect of the surface currents of the radiator and ground plane. The measured impedance bandwidth of the antenna covers the range of 3.1 to 11 GHz for a VSWR$\le$2, which satisfies the requirement of the UWB operation. From the analysis of the surface currents, the proposed antenna can be treated as two asymmetric dipoles with the included angle of 90 degrees which lie along z-direction symmetrically. It is observed that the effect of the surface currents on the radiation patterns is similar to that of the corresponding dipole. The length and width of the found plane correspond the radius and length of the dipole respectively. This approach is also valid to general printed monopole antennas. Finally, we included an antenna example having resonance at a lower frequency by tapering the edges of the ground plane and another example having a bandstop characteristic by inserting an inverted-U slot on the radiator, and explain those antennas using the surface currents.

임플란트 증례에서 발생하는 심미적 문제점들에 관한 고찰

이동현,Lee, Dong-Hyun 대한심미치과학회 2015 Journal of the Korean Academy of Esthetic Dentistr Vol.24 No.1

The critical factors affecting the esthetics of anterior implants can be summarized as following: 1) Correct positioning of implant fixture, 2) Enough amount of alveolar bone, 3) Optimum volume of soft tissue. The position of implant is probably the most important factor in obtaining esthetic treatment outcome. The 3-dimensional orientation of implant is determined by the position on the alveolar ridge and its direction. Clinicians often try to mimic natural teeth when fabricating restorations. During the course of esthetic diagnosis and treatment, however, one should not forget to consider the correlation between facial pattern, lips, gingiva, alveolar ridge, as well as remaining dentition. Since anterior region is biologically unfavorable when compared with posterior region, one minor discrepancy in positioning of implant can cause esthetically undesirable treatment outcome. If one understands the biological and prosthetic meaning of implant' s 3-dimensional position, he or she can achieve superior esthetic outcome in anterior region.

회원작품 - 추월(推越) 자연과 인간의 연결

이동현,Lee, Dong-hyun 대한건축사협회 2014 건축사 Vol.2014 No.9

오행침(五行鍼)과 육기침(六氣鍼)을 응용한 뇌경색환자 치험 1례

이동현,정영표,김현수,류충열,조명래,채우석,나건호,Lee, Dong-Hyun,Jeong, Yeong-Hyo,Kim, Hyeon-Hu,Ryu, Chung-Ryul,Cho, Myeong-Rae,Chae, Woo-Seok,Na, Gun-Ho 경락경혈학회 2006 Korean Journal of Acupuncture Vol.23 No.1

Objectives : The purpose of this case is to report the improvement after treatment about a patient with cerebral infarction by Sa-Am's Ohaeng-acupuncture and Liuqi-acupuncture. Methods : We treated the patient with acupuncture therapy from 6th September 2004 to 15th November 2004 by reinforcing Dadun(Liv 1) Zusan Li(S36) Quchi(Li 11) and reducing Taibai(Sp 3) on the basis of Etiological Analysis and Differenciation of Endogenous Wind caused by Damp Phlegm and heat. Results .1. Right hemiplegia improved Gr. I to Gr.IV after acupuncture therapy. 2. we interpreted 'reinforcing Dadun(Liv 1) and reducing Taibai(SP 3)'as using Simjeonggyeok in conjunction with Simseunggyeok on the basis of Sa-Am's Ohaeng-acupuncture. 3. we interpreted 'reinforcing Dadun(Liv 1) and reducing Taibai(Sp 3)'as Excreting Dampness in Spleen on the basis of Liuqi-acupuncture. 4. we interpreted 'reinforcing Zusan Li(S 36) and Quchi(Li 11)'as Eliminating Wind-dampness and Menstrual Regulation.

주파수 가변 및 소형 Metamaterial Peano Antenna

이동현,장경덕,박위상,Lee, Dong-Hyun,Jang, Kyung-Duk,Park, Wee-Sang 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.8

본 논문에서는 Peano curve의 가장자리에 인덕터를 집적한 주파수 가변 소형 metamaterial 안테나를 제안하였다. 제안된 안테나는 1차 Peano curve 평면과 그라운드 평면으로 구성되며, 이 두 평면은 두 개의 단락 post로 연결되어 있다. 이 단락 post와 Peano curve 사이에는 인덕터가 부착되어 있다. 두 인덕터의 inductance를 적절히 선택하여 입력 임피던스 대역폭의 감소 없이 안테나의 동작 주파수를 조절할 수 있다. 안테나의 동작 원리를 설명하기 위해 안테나의 등가 회로를 제시했다. 시뮬레이션 결과를 검증하기 위해 몇 가지 다른 인덕터가 부착된 안테나를 제작했으며, 측정 결과는 시뮬레이션 결과와 매우 잘 일치한다. 인턱터 값 조합에 따라 입력 임피던스의 감소 없이 동작 주파수가 1.47 GHz에서 0.586 GHz로 변함이 측정되었다. 91 nH와 470 nH의 두 인덕터를 집적한 경우, 안테나의 전기적 크기는 $0.0246 {\lambda}{\times}0.0246{\lambda}{\times}0.0114{\lambda}$로 매우 소형이다. 이 때 측정된 입력 임피던스 대역폭$(S_{11}{\leq}-10 dB)$과 방사 효율은 각각 5.22 %와 47.25 %이다.

게이트 절연막에 사용된 점착층에 대한 영향

이동현,형건우,표상우,김영관,Lee, Dong-Hyun,Hyung, Gun-Woo,Pyo, Sang-Woo,Kim, Young-Kwan 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.4

The electrical performances of organic thin-film transistors (OTFTs) have been improved for the last decade. In this paper, it was demonstrated that the electrical characteristics of the organic thin film transistors (OTFTs) were improved by using polymeric material as adhesion layer on gate insulator. We have investigated OTFTs with polyimide adhesion layer which was fabricated by vapor deposition polymerization (VDP) processing and formed by co-deposition of 2,2-bis (3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 4,4'-oxydianiline. It was found that the OTFTs with adhesion layer showed better electrical characteristics than with bare layer because of good matching between semiconductor and gate insulator. Our devices of performance are field effect mobility of $0.4cm^2/Vs$, threshold voltage of -0.8 V and on-off current ratio of $10^6$. In addition, to improve the electrical characteristics of OTFT, we have reduced the thickness of adhesion layer up to a few nanometrs.