http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소아백혈병의 전신방사선조사 시 조직보상체의 두께변화에 따른 선량평가
이동연(Dong-Yeon Lee),김창수(Chang-Soo Kim),김동현(Dong-Hyun Kim),김정훈(Jung-Hoon Kim) 한국콘텐츠학회 2014 한국콘텐츠학회논문지 Vol.14 No.4
전신방사선조사(Total Body Irradiation; TBI)는 백혈병의 치료방법 중의 하나인 조혈모세포 이식법의 전처치로 쓰인다. 2013년 장기이식관리센터 자료에 의하면 조혈모세포이식법의 건수는 계속 늘어나고 있다고 보고되었다. 하지만 현재 TBI 시행하기에 앞서 선량에 대한 평가는 미미한 실정이다. 특히 소아의 경우 방사선감수성이 민감하기 때문에 TBI 시행 전 정확한 선량평가가 시행되어야 할 것으로 판단된다. 이에 본 연구는 TBI 시행 시 사용되는 조직보상체의 두께의 변화에 따라 표면선량과 심부장기선량에 대하여 선량평가를 한 후 가장 이상적인 조건을 찾고자 하였다. 그 결과, 표면선량은 에너지 4 MV, SSD 280 ㎝, 조직보상체의 두께가 0.5 ㎝일 때 5.84 mGy/min 으로 가장 높은 수치를 나타내었다. 또한 조직보상체의 두께가 1 ㎝ 이하였을 때 TBI에서 가장 이상적인 선량분포를 나타냄을 알 수 있었다. Total body irradiation use one of the pre-treatment as hematopoietic stem cell transplantation in the treatment of leukemia. According to the study of Korean network for organ sharing 2013 report, continue to increase the number of hematopoietic stem cell transplantation. however, the current dose evaluation fall short before treatment. So purpose of this study is Surface dose and deep organ dose evaluation and then find the most ideal conditions when change of the thickness on tissue compensator in TBI. Result, surface dose in 4 MV, SSD 280 ㎝, compensators thickness 0.5 ㎝, was measured the highest dose 5.84 mGy/min. And the ideal dose showed when compensator thickness less than 1 ㎝.
MCNP-code를 이용한 의료용 선형가속기의 타깃 재질에 따른 광자선 특성 분석
이동연(Dong-Yeon Lee),박은태(Eun-Tae Park),김정훈(Jung-Hoon Kim) 한국방사선학회 2017 한국방사선학회 논문지 Vol.11 No.4
의료용 선형가속장치의 두부 구성요소 중 광자 발생의 원인이 되는 타깃에 대한 연구로써, 타깃의 재질에 따른 광자를 분석하여 타깃 재질 별 발생하는 광자특성에 대한 기초자료를 제시하고자 한다. 본 연구에서는 몬테카를로 방식을 바탕으로 한 MCNPX를 사용하여 타깃 재질에 따른 6, 15 MV의 광자 특성을 비교 분석하였다. 타깃 재질 별 평균에너지는 6 MV에서 1.69 ~ 1.84 MeV, 15 MV에서는 3.38 ~ 3.56 MeV로 분석되었다. Flux는 6 MV에서 1.64 × 10 -5 ∼ 1.80 × 10 -5 #/cm 2 /e, 15 MV는 1.76 × 10 -4 ∼ 1.85 × 10 -4 #/cm 2 /e 로 계산되었다. 결과를 분석하면, 타깃 재질이 고원자번호일수록 평균에너지와 Flux가 증가하는 것으로 평가다. 본 연구를 바탕으로 광자의 물리적 특성에 대한 기초적인 자료를 제시할 수 있었으며, 추후 타깃 선정 시 경제성, 효율성은 물론 물리적 측면을 고려할 수 있어 적절한 선택을 할 수 있을 것으로 판단된다. This study purpose is propose the basic data for selecting the optimal target material by analyzing the photon characteristics of various materials which was located in the head of medical linear accelerator. In this study, energy spectrum of 6, 15 MV photon beams were compared and analyzed for 13 target materials using MCNPX of Monte Carlo method. The mean energy for the 6 MV energy spectrum was 1.69 ∼ 1.84 MeV and that for the 15 MV was 3.38 ~ 3.56 MeV, according to the target material. The flux for the 6 MV energy spectrum was 1.64 × 10 -5 ∼ 1.80 × 10 -5 #/cm 2 /e and that for the 15 MV was 1.76 × 10 -4 ~ 1.85 × 10 -4 #/cm 2 /e. The analysis shows that the average energy and flux increase with higher atomic number of the target material. Based on this study, it is possible to present the basic data about the physical characteristics of the photon, and it will be possible to select the target later considering economic, efficiency and physical aspect.
이동연(Dong Yeon Lee),송병욱(Byung Wook Song),조태준(Tae-Joon Cho),최인호(In Ho Choi),정진엽(Chin Youb Chung),유원준(Won Joon Yoo) 대한정형외과학회 2007 대한정형외과학회지 Vol.42 No.1
목적: 선천성 근성 사경 환자에서 동반된 두개 안면 비대칭을 객관적인 방법으로 측정하고 연령 및 경부 운동범위와의 관련성을 분석하고자 하였다. 대상 및 방법: 선천성 근성 사경으로 내원한 환자 중 두개 방사선 계측 촬영을 시행한 48명을 대상으로 하였다. 두개 방사선 계측 촬영 사진에서 두개 안변 경사각과 두개골 기저부 경사각을 측정하였다. 측두골 추체부 상연에서부터 유양돌기 말단까지의 길이를 측정하여 그 차이를 비교하였으며 두개 비대칭은 비중격을 지나는 수직선을 기준으로 양측 두개반구의 넓이를 비교하였다. 방사선 측정치의 평균과 표준편차를 구하고, 환아의 연령과 경부 운동범위와의 상관 관계를 통계 분석하였다. 결과: 두개 안면 경사각은 환측으로 5.2°±2.8° 기울어져 있었다. 두개골 기저부 경사각은 환측으로 평균 2.6°±2.6° 기울었으며 유양돌기의 길이는 환측이 7.0%±8.5% 길었고, 두개 비대칭은 환측이 15.4%±11.6% 더 컸다. 나이가 많은 군에서 하악 경사각(p=0.017) 및 유양돌기의 길이 차이(p=0.007)가 통계적으로 유의하게 컸으며 이 외의 측정값에서는 유의한 차이가 없었다. 결론: 선천성 근성 사경 환자에서 동반된 두개 안면 비대칭을 정량화할 수 있는 측정 방법을 제시하고 이를 통해 관상면 상에서 두개 안면부의 만곡 변형과 두개골의 비대칭이 있다는 것을 확인하였다. Purpose: To propose an objective method for evaluating the craniofacial asymmetry in congenital muscular torticollis patients, and to determine the correlation between the craniofacial asymmetry and clinical parameters such as age and the limitation of neck motion. Materials and Methods: Forty eight patients with congenital muscular torticollis, who underwent cephalometry for an evaluation, were enrolled in this study. The craniofacial curvature on the coronal plane, calvarial asymmetry, and mastoid process length were analyzed on the radiograph of the cephalometry. These radiographic measurements were analyzed to determine the correlation between the craniofacial asymmetry and clinical parameters. Results: The craniofacial axis was tilted to the affected side by 5.2°±2.8°. The skull base axis was tilted to the affected side by 2.6°±2.6°, and the mandible axis was tilted to the affected side by 1.0±2.3°. The difference in the mastoid process length from the skullbase was 7.0%±8.5%. The calvarial width from the vertical midline was 15.4% ±11.6% larger in the affected side. In patients older than 5 years, the mandibular tilting angle (p=0.017) and the length of the mastoid process (p=0.007) were greater than those of the younger patients. Conclusion: We proposed a new objective method for quantifying the craniofacial asymmetry in congenital muscular torticollis patients. This method confirmed the patients to have an angular deformity and asymmetry in the craniofacial bone.
몬테칼로법을 이용한 의료용 선형가속기 차폐벽의 방사화 특성 분석
이동연(Dong-Yeon Lee),박은태(Eun-Tae Park) 한국콘텐츠학회 2016 한국콘텐츠학회논문지 Vol.16 No.10
본 연구는 의료용 선형가속기를 차폐하고 있는 차폐벽에 대하여 방사화 분석을 함으로서 추후 선형가속기 시설의 해체 시 해체비용의 절반이상을 차지하는 차폐벽에 대하여 폐기물 준위를 평가하고 이에 따른 폐기물 처리방법을 분석함으로서 해체비용 측면에 있어서 이득을 얻을 수 있는 방법에 대하여 논의하고자 한다. 실험결과, 선형가속기에서 발생하는 중성자 양은 차폐벽을 방사화 시키기에 충분한 양이 측정되었으며, 방사화 분석 결과 약 20 개 이상의 핵종이 분석되었다. 이 중 <SUP>24</SUP>Na, <SUP>45</SUP>Ca, <SUP>59</SUP>Fe 핵종이 규제해제 농도를 초과하는 것으로 분석되었으며, 그 값은 차폐벽 깊이가 깊어질수록 농도는 줄어들었다. 이를 바탕으로 특정 세 구역(E,F,G)은 매립이나 재활용이 불가능한 것으로 평가되었으며, 나머지 구역은 일정 깊이 이상일 경우 매립이나 재활용이 가능한 것으로 평가되었다. This study analyzed for the radioactive shielding wall, which shields the medical linear accelerator. This allows to evaluate the level of waste with respect to the shield wall, which accounts for more than half of the cost of dismantling later linac facility. In addition, by analyzing the waste processing method according we discuss the way to obtain the benefits in terms of dismantling cost. Results of the simulate, the amount sufficient to screen the amount of neutron radiation occurring in the shielding wall linac was measured. And neutron activation analysis results were analyzed nuclides more than about 20. This analysis was in excess of that, <SUP>24</SUP>Na, <SUP>45</SUP>Ca, <SUP>59</SUP>Fe nucleus paper deregulation concentration. The value is reduced is greater the deeper the depth of the shielding wall concentration . Based on this, three specific areas (E, F, G) was estimated to be impossible to landfill or recycling. The rest area was estimated to be buried or recycled if possible more than a predetermined depth.
항공기 탑재 AESA 레이다의 통합 항법 성능 분석 연구
이동연(Dong-Yeon Lee),권혁준(Hyeokjoon Kwon),이동욱(Donguk Lee),이해민(Haemin Lee),정영광(Youngkwang Jung),정재현(Jaehyeon Jeong),박상규(Sanggyu Park),이성원(Sungwon Lee),박준현(June Hyune Park),탁민제(Min-Jea Tahk),방효충(Hyochoong 한국항공우주학회 2021 韓國航空宇宙學會誌 Vol.49 No.4
기존 레이다 시스템에 비해 다양한 이점을 제공하는 능동 위상 배열 (AESA) 레이다의 성공적인 운용을 위해서는 정확하고 강건한 항법이 중요하다. 본 논문은 AESA 레이다를 탑재한 항공기의 EGI 시스템을 기반으로 한 통합 항법의 성능 분석에 대한 연구를 소개한다. GPS 및 IMU 입력을 생성하는 모델이 개발되었고, GPS/IMU 약결합 항법 필터가 구성되었다. GPS/IMU 모델 및 항법필터와 함께 6자유도 항공기 시뮬레이터를 사용하여 항법 성능을 평가하는 절차가 소개되었다. 성능 분석 절차의 단계는 사례 연구와 함께 설명되었다. For successful operations of an airborne Active Electronically-Scanned Array (AESA) radar, which has various advantages over traditional radar systems, accurate and robust navigation is critical. This paper discusses a study on the performance analysis of an integrated navigation based on the Embedded GPS/INS (EGI) system for an aircraft equipped with an AESA radar. The models for generating the inputs for the GPS/IMU are developed. A navigation filter for a loosely-coupled GPS/IMU system is constructed. Overall navigation performance assessment procedure using a six degree of freedom aircraft simulator – along with the GPS/IMU models and the navigation filter – is introduced. The steps of the performance analysis procedure are explained using a comprehensive case study.