http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
클러스터 기반 구조의 PCS 에서 호 처리 프로토콜의 설계 및 구현
이대욱(Dae-Wook Lee),박선영(Sun-Young Park),황성호(Sung-Ho Hwang),이원열(Won-Yeol Lee),한기준(Ki-Jun Han),김명철(Myung-Chul Kim) 한국정보과학회 1997 정보과학회 컴퓨팅의 실제 논문지 Vol.3 No.6
본 논문은 클러스터 기반 구조의 분산 ATM 망에서 PCS를 위한 호 처리 프로토콜을 설계하고 구현하였다. 호 처리 절차의 설계를 위해 시스템의 배경이 되는 분산 처리 환경과 호 처리 과정을 분석하여 분석 모델을 제시하였는데 이는 시스템에서 필요한 요소들을 오브젝트 개념을 이용하여 모델링하고, 시스템 오브젝트들 간에 주고 받는 시그널의 흐름을 동적으로 모델링함으로써 이루어졌다. 전체 시스템을 몇 개의 논리적인 블럭 단위로 나누고 각 블럭에 속하는 오브젝트들과 이 오브젝트간에 주고 받을 시그널을 정의하였고 각 오브젝트별로 시그널의 교환으로 인한 구체적인 내부 상태의 천이와 속성을 정의하였다. 이렇게 설계한 호 처리 기법을 시뮬레이션을 통해 오류를 수정하고 보완함으로써 설계한 호 처리 프로토콜이 이상 없이 동작함을 검증하였다. 프로토콜의 효율적인 구현을 위해 OMT(Object Modeling Technique), SDL(Specification and Design Language)과 MSC(Message Sequence Chart)를 이용하였다. In this paper, we designed and implemented a call processing protocol for PCS on the distributed cluster-based ATM network. For design of the call processing protocol, we set up a model for the distributed environment and the call processing procedure through object modeling of the system components and dynamic modeling of the signals between the system objects. We divided the system into the several logical blocks and defined the objects within each block and the signals transmitted among those objects. We also defined states of each object and state transitions caused by lots of signal exchange. We verified the correctness of the designed protocol by correcting the error and modified the protocol through the simulation. For the efficient implementation of the protocol, we use the OMT(Object Modeling Technique), SDL(Specification and Design Language) and MSC(Message Sequence Chart).
AS B-트리: SSD를 사용한 B-트리에서 삽입 성능 향상에 관한 연구
김성호,노홍찬,이대욱,박상현,Kim, Sung-Ho,Roh, Hong-Chan,Lee, Dae-Wook,Park, Sang-Hyun 한국정보처리학회 2011 정보처리학회논문지D Vol.18 No.3
최근 플래시 메모리 및 SSD가 노트북이나 PC의 저장장치로 사용되는 것뿐 아니라, 기업용 서버의 차세대 저장장치로 주목 받고 있다. 대용량의 데이터를 처리하는 데이터베이스에서는 삽입, 삭제, 검색을 빠르게 하기 위해 다양한 색인 기법을 사용하는데 그 중B-트리 구조가 대표적인 기법이다. 하지만 플래시 메모리 상에서는 하드디스크와 달리 덮어쓰기(overwrite) 연산을 수행하기 위해서는 먼저 해당 블록(block)에 대하여 플래시 메모리의 연산 중 가장 비용이 많이 요구되는 삭제(erase) 연산을 수행 해야만 한다. 이러한 문제점을 극복하기 위해 플래시 메모리 사이에 위치하는 플래시 변환 계층(Flash memory Translation Layer)을 사용한다. 이 플래시 변환 계층은 수정한 데이터를 동일한 논리 주소에 덮어쓰기를 하더라도 실제로 임의의 다른 물리 주소에 저장하도록 하여 이 문제를 해결할 수 있다. NAND 플래시 메모리를 배열 형태로 포함하고 있는 SSD는 한 개 이상의 플래시 메모리 패키지를 병렬로 접근할 수 있다. 이러한 병렬 접근 방식을 사용하여 쓰기 연산 성능을 향상하기 위해서는 연속한 논리 주소에 쓰기 연산을 요청하는 것이 유리하다. 하지만 B-트리는 구성 노드에 대한 삽입 삭제 연산 시에 대부분 연속되지 않은 논리 주소 공간에 대한 갱신 연산이 일어나게 된다. 따라서 SSD의 병렬 접근 방식을 최대한 활용할 수 없게 된다. 본 논문에서는 수정한 노드를 연속한 논리 주소에 쓰도록 하는 AS B-트리 구조를 제안하여 SSD의 병렬 접근 방식을 최대한 활용할 수 있도록 하였다. 구현 및 실험한 결과 AS B-트리에서의 삽입 시간이 B-트리보다 21% 개선된 것을 확인하였다. Recently flash memory has been being utilized as a main storage device in mobile devices, and flashSSDs are getting popularity as a major storage device in laptop and desktop computers, and even in enterprise-level server machines. Unlike HDDs, on flash memory, the overwrite operation is not able to be performed unless it is preceded by the erase operation to the same block. To address this, FTL(Flash memory Translation Layer) is employed on flash memory. Even though the modified data block is overwritten to the same logical address, FTL writes the updated data block to the different physical address from the previous one, mapping the logical address to the new physical address. This enables flash memory to avoid the high block-erase cost. A flashSSD has an array of NAND flash memory packages so it can access one or more flash memory packages in parallel at once. To take advantage of the internal parallelism of flashSSDs, it is beneficial for DBMSs to request I/O operations on sequential logical addresses. However, the B-tree structure, which is a representative index scheme of current relational DBMSs, produces excessive I/O operations in random order when its node structures are updated. Therefore, the original b-tree is not favorable to SSD. In this paper, we propose AS(Always Sequential) B-tree that writes the updated node contiguously to the previously written node in the logical address for every update operation. In the experiments, AS B-tree enhanced 21% of B-tree's insertion performance.
다구치 방법을 이용한 냉동냉장창고 시뮬레이션 설계 및 분석
조규성 ( Gyu Sung Cho ),이승훈 ( Seung Hoon Lee ),이대욱 ( Dae Wook Lee ),김호균 ( Ho Gyun Kim ) 한국경영공학회 2011 한국경영공학회지 Vol.16 No.3
This paper deals with the simulation model design and analysis of refrigerated warehouses in Busan using Taguchi method. We analyze the operating processes of refrigerated warehouses and develop a simulation model which implements the class model composition behavior through aspect-oriented modeling approach. Also, a simulation experiment is carried out to find the optimal conditions of the system through Taguchi method. For the simulation experiment, six main control factors are selected and orthogonal array is utilized. The optimal levels of the six factors is determined and verified. As a result, the performance characteristic (charge rate) of the system was achieved at 90.7%.